时间序列沉积物捕获器（sediment trap）及其在青海湖的放置

沉积物捕获器在认识现代沉积过程方面具有独特的优势,已在海洋和国外一些大湖的研究中得到了成功的应用,但相关的工作在我国湖泊研究中尚未开展。Mark 8-13型时间序列沉积物捕获器是用来连续收集水体沉降颗粒物的仪器,可以获得沉积物输入通量和季节性变率。本文在介绍了该类型沉积物捕获器的设计、工作原理、投放和回收等基本知识的基础上,阐明了我们选择青海湖作为放置沉积物捕获器的理由和科学意义。在本专题的五篇论文中,我们展示了在青海湖放置的沉积物捕获器于2010年7月至2012年9月期间收集的沉积物和湖水样品的研究结果和同步的实时监测数据。通过在青海湖两年多的试验性地放置以及初步的结果,我们建议在我国典型内陆不同位置的湖泊等水体长期地放置这类沉积物捕获器,将为湖泊等水体系统的现代沉积和生物过程的深入理解提供全新的视角。     

不同SRT条件下厌氧污泥中氮元素的变化规律研究

氮素是衡量污泥性能的重要指标之一,在污泥厌氧消化过程中,污泥中所含的四种氮素形态之间可相互转化,研究其过程中的氮素变化规律对于优化厌氧消化工艺具有重要的指导意义。通过对5 d和10 d两种不同污泥停留时间(SRT)的污泥厌氧消化系统的研究,分析氮元素的变化规律。研究结果表明,SRT为5 d天和10 d的两个系统中,均无亚硝态氮的累积,实验前期,10 d的系统中硝态氮的产生速率比5 d的快,但系统运行10 d后10 d系统的硝态氮的含量低于5 d系统。在两反应系统中,氨氮的变化规律十分接近,10 d的系统中氨氮含量一直高于5 d的系统。总氮含量的变化与氨氮含量变化一致,四种形态氮素中,对总氮贡献最大的是氨氮。实验过程中,两系统中均并无明显产气现象,在SRT小于等于10 d的厌氧反应器中,虽然有发生反硝化反应,但通过该反应去除的氮素极少。     

高锰酸盐指数测定中影响因素的探讨

通过对酸性法测定高锰酸盐指数全过程的分析,结果表明水样静置时间、水样浓度、水浴时间、反应温度等因素影响测定结果。文章总结了测定过程中需要注意的几个关键环节,确保获得准确数据。     

pH和发酵时间对厨余垃圾发酵产乳酸及光学特性的影响

通过间歇实验探讨了在中温、非灭菌条件下,pH和发酵时间对厨余垃圾发酵产乳酸及其光学特性的影响.结果表明,采用非灭菌的厨余垃圾发酵产乳酸,发酵液中还原糖浓度低,pH调节到近中性和偏碱性（pH为6～8）的各组还原糖浓度高于偏酸性组（pH=5和pH=4的对照组）;在控制pH为7时,总乳酸产生速率达到0.59 g·(L·h)^-1,单位挥发性固体的乳酸产量达到0.62 g·g^-1;控制pH为7和8时,以有机碳表示的乳酸分别占发酵液总有机碳的78%和89%;控制pH为8时,L-乳酸是主要的异构体形式,单位挥发性固体L-乳酸产量达到0.48 g·g^-1;响应面分析结果表明,发酵时间在120 h前,随着pH升高和发酵时间的延长,发酵液中L-乳酸浓度增大,120 h后则下降;pH和发酵时间对L-乳酸占总乳酸的比例有明显影响：偏酸性条件(未调pH及pH=5),发酵前120 h,该比例随发酵时间逐渐增大,L-乳酸在总乳酸中的比例达到0.9,其后,则逐渐下降;偏碱性条件下(pH=8),L-乳酸在总乳酸中的比例在整个发酵时间段内都保持在0.86以上,在发酵时间48 h时达到0.93,而在pH中性条件下,该比例在发酵后期显著下降;控制pH为8时,可以同时获得高的乳酸产量和光学纯度.     

Leaching of styrene and other aromatic compounds in drinking water from PS bottles

Bottled water may not be safer, or healthier, than tap water. The present studies have proved that styrene and some other aromatic compounds leach continuously from polystyrene （PS） bottles used locally for packaging. Water sapmles in contact with PS were extracted by a preconcentration technique called as ＂purge and trap＂ and analysed by gas chromatograph-mass spectrometer （GC/MS）. Eleven aromatic compounds were identified in these studies. Maximum concentration of styrene in PS bottles was 29.5 μg/L. Apart from styrene, ethyl benzene, toluene and benzene were also quantified but their concentrations were much less than WHO guide line values. All other compounds were in traces. Quality of plastic and storage time were the major factor in leaching of styrene. Concentration of styrene was increased to 69.53 μg/L after one-year storage. In Styrofoam and PS cups studies, hot water was found to be contaminated with styrene and other aromatic compounds. It was observed that temperature played a major role in the leaching of styrene monomer from Styrofoam cups. Paper cups were found to be safe for hot drinks.     

Non-UV based germicidal activity of metal-doped TiO2 coating on solid surfaces

A stain-based screening method was developed to screen different catalyst coatings for their germicidal activity. A Baclight dead/live bacteria viability kit （invitrogen, molecular probes） was used for staining the cell. The screening was carried out following a standard procedure. This included loading cell suspension to solid surface and maintaining contact for 30 min, then staining with a mixture containing dyes. The stained cells were observed using an epifluorescent microscope and photographed with a CCD camera under UV. Metal-doped TiO2 coatings on AI plates were prepared and tested for non-UV germicidal activity without using UV. It was tested using model microorganisms such as Bakers Yeast （Saccharomyces cerevisiae）, Bacillus subtilis, Pseudomonas putida, and Escherichia coli. On the basis of the germicidal activity of catalyst and the degree of damage caused to the cells, the stained cells may appear green （viable）, green with red or yellow nuclei and yellow （compromised） or red （nonviable）. According to their stained color, cells were counted to calculate the percentage of dead, live, and compromised cells. Compromised cells are cells that grow very slowly after reculturing indicating a degree of reversible cell damage. Screening the germicidal activity using this staining method is accurate and efficient, and requires less time than the culture-based method. A modification to the procedure for measuring germicidal activity of rough surfaces or fibrous coatings was developed. Both TiO2 and metal-doped TiO2 （Ag, Pt, Au, Cu） possess non-UV based germicidal activity. The germicidal activity of TiO2 was found to be related with its wetting property and can be improved by UV irradiation before testing. It is not greatly affected by contact time, indicating a fast acting germicidal activity.     

Review of the remediation strategies for soil water repellency

Many regions of the world are predicted to experience water scarcity due to more frequent and more severe droughts and increased water demands. Water use efficiency by plants can be negatively affected by soil water repellency (SWR). It is timely to review existing techniques to remedy SWR. Ideally remediation addresses the origins of a problem. However, the fundamental mechanisms of how and why SWR develops are still poorly understood. In this review it was hypothesized that SWR occurs where the balance of input-decomposition of organic matter is impaired, due to either increased input or decreased decomposition rates of hydrophobic substances. Direct and indirect strategies to remedy SWR were distinguished. While direct remediation aims at abolishing the causes of SWR, indirect strategies seek to manage sites with SWR by treating its symptoms. The 12 reviewed strategies include applying surfactants, clay, slow-release fertilizers, lime, and fungicides, bioremediation of SWR through stimulating earthworms, choosing adapted vegetation, irrigation, cultivation, soil aeration and compaction. Some of the techniques have been applied successfully only in laboratory experiments. Our review highlights that it is not straightforward to cure SWR based on easily measurable and site-specific soil and vegetation properties, and that long-term, large-scale field experiments are required to improve the understanding of the evolution of SWR as cornerstone to develop cost-effective and efficient remediation strategies. We also identified current research gaps around the diagnosis and prevention of SWR.     

猪粪秸秆高温堆肥过程中碳氮转化特征与堆肥周期探讨

将猪粪与秸秆以7：1（质量比,以鲜重计）的比例,在自制的强制通风静态堆肥反应箱中进行高温堆肥试验,研究了堆肥过程中碳氮转化特征及其腐熟时间.同时,在堆制的23d中,根据堆温变化采样6次,分析了堆肥样品中各种氮素和碳素含量及其它性质的变化情况.结果表明：堆肥结束时,硝态氮含量增加了103.0%,铵态氮、有机氮、总氮含量分...     

华北地区1951-2009年气温、降水变化特征

基于华北五省(市)64个基本气象站的1961-2009年逐年逐月气温、降水资料, 利用泰森权重计算了华北地区面平均降水及面平均气温,并建立了7个长序列气象站的气温、降水与面平均值的回归方程,展延了研究区1951-1960年面平均降水和气温资料。对展延后的1951-2009年序列数据,应用Mann-Kendall检验、Mann-Whitney检验、9 a滑动平均等方法进行趋势分析,分析结果显示: 该区59 a间年气温上升了1.5 ℃,年气温序列存在显著上升趋势,年气温序列在1993年前后有一个突变点,年气温距平以1989年为低温期与高温期的分界线,年气温平均每10 a增长2.2%;年降水序列无显著趋势,亦无显著跳跃趋势,年降水距平大致以1976年为多雨期与少雨期的分界线,年降水平均每10 a增长-1.3%。研究成果为深入分析华北地区气候变化规律、未来气候变化影响,以及水资源对气候变化的响应提供了基础。     

液相高压放电降解RB5染料废水的试验研究

随着印染工艺不断更新,大量化学分子结构复杂的化工染料应用到印染行业,使得常规的水处理工艺难以降解印染废水中的染料。本文以活性黑（RB5）染料为研究对象,采用液相高压放电产生强氧化性自由基来降解染料废水,考察反应时间、初始浓度和气体流量对RB5降解的影响,研究结果表明：在外部功率相同的情况下,浓度高染料其降解率相对较低;通入氧气量增加,产生的活性自由基和活性物质数量也增加,RB5的降解率也增大,但气流量不宜过大;高压放电产生的各种活性物质容易破坏染料发色基团的分子链,使其脱色。