化学沉淀法除磷和生物法除磷的比较

对化学沉淀法除磷和生物法除磷的机理作了较详细的阐述，并就两者在除磷效果，污泥产量，污泥处置，除磷费用方面进行了比较。结果表明，两种方法磷的去除率比较接近，总费用没有明显差别，其优点是，生物法除磷污泥产量少，而化学沉淀法除磷操作简便。     

三唑磷农药废水厌氧处理可行性研究

采用厌氧流化率工艺处理在唑磷农药废水，必须降低原水中ＮＨ３－Ｎ含量，调整营养比例，当ＣＯＤ：Ｎ：Ｐ＝（１８０～２００）：５：１时，在中温厌氧消化条件下，ＣＯＤ含量可从４１７０ｍｇ／ｌ，去除率约５０％，沼气产率达到０．２５６ｍ＾３／ｍ＾３．ｄ。因此，把厌氧处理作为好氧处理的预处理单元，能确保整个处理系统出水达标。     

污水处理厂沉淀池改进方案

根据某污水处理场沉淀池的COD和SS去除率较低的情况，文中着重探讨了问题的产生原因，并针对平流式沉淀池及斜管式沉淀池提出了相应的改进方案，实践证明改进后提高了COD和SS去除率30％，并明显降低了二级生物处理阶段的有机物负荷，节省了大量的暴气量通过改进达到了降低处理场其它环节的负荷和降低污水处理成本的目的。     

一种新型复合式生物流化反应器混合特性的研究

对新型蜂窝状断面复合生物流化反应器进行了液体循环速率和水力停留时间分布曲线的测定，实验表明新型反应器具有抗冲击负荷强，接近CSTR反应器的特点，反应器随气量增大、载体投加量减少和进水量减少而更近似于CSTR反应器，通过理论分析，证明了影响液体循环速率的参数主要有气体流量(气含率)、反应器沿程和局部阻力系数以及Ad/Ar，并且得出液体循环速率与反应器高度的0．5次方成正比。     

Treatment of 2-phenylamino-3-methyl-6-di-n-butylaminofluoran production effluent by combination of biological treatments and Fenton＇s oxidation

High strength refractory organic stream is produced during the production of 2-phenylamino-3-methyl-6-di-n-butylaminofluoran （One Dye Black 2, abbr. ODB 2）, a novel heat-sensitive material with a promising market. In this study, a combination of acidificationprecipitation, primary biological treatment, Fenton＇s oxidation and another biological treatment was successfully used for the removal of COD from 18000-25000 mg/L to below 200 mg/L from the ODB 2 production wastewater in a pilot experiment. A COD removal of 70%-80% was achieved by acidification-precipitation under a pH of 2.5-3.0. The first step biodegradafion permitted an average COD removal of 70% under an hydraulic residence time （HRT） of 30 h. By batch tests, the optimum conditions of Fenton＇s oxidation were acquired as： Fe^2＋ dose 6.0 mmol/L; H2O2 dose 3000 mg/L; and reaction time 6 h. The second step biological treatment could ensure an effluent COD below 200 mg/L under an HRT of 10 h following the Fenton＇s treatment.     

皮革和毛皮加工废水处理技术

采用混凝沉淀-酸化水解-悬挂链曝气-生物接触氧化组合工艺处理皮革和毛皮加工生产废水。实验结果表明;进水COD为2400mg/L,处理后出水COD≤100mg/L,去除率≥95.8%。各项水质指标均稳定地达到了GB8978-96污水综合排放一级标准。     

Determination and discussion hydraulic retention time in membrane bioreactor system

Based on the microorganism kinetic model, the formula for computing hydraulic retention time in a membrane bioreactor system (MBR) is derived. With considering HRT as an evaluation index a combinational approach was used to discuss factors which have an effect on MBR. As a result, the influencing factors were listed in order from strength to weakness as: maximum specific removal rate K, saturation constant Ks, maintenance coefficient m, maximum specific growth rate ,ua and observed yield coefficient Yobs. Moreover, the formula was simplified, whose parameters were experimentally determined in petrochemical wastewater treatment. The simplified formula is θ= 1.1( 1/β -1)(Kｓ S)/KXo , for oetroehemical wastewater treatment K and Ko eaualed 0.185 and 154.2, resoectively.     

大型构件防腐喷砂(涂)车间通风除尘设计

考虑到大型构件喷砂（涂）车间铝粉尘污染的特点以及构件进出空间的限制，比较了各种类型的除尘器，选择了最合理的通风除尘方案，进行了通风除尘系统的设计。该设计方案实施后，除尘效果显著。     

Oil/Suspended Particulate Material Interactions and Sedimentation

The interactions of physically dispersed oil droplets with suspended particulate material (SPM) can be important for the transport of bulk quantities of spilled crude oil and polycyclic aromatic hydrocarbons (PAH) to subtidal sediments. The literature regarding oil/SPM interactions is reviewed, and results from whole-oil droplet/SPM interaction kinetics and pure-component (Prudhoe Bay crude oil distillate cut) equilibrium partitioning experiments are presented. The effects of oil type, SPM characteristics, and salinity on the interaction rates are examined, and the importance of whole-oil droplet/SPM interactions on particle agglomeration and settling behavior are discussed. Whole-oil droplet/SPM interactions are retarded as oil droplet dispersion into the water column is inhibited by oil viscosity increases due to evaporation weathering and water-in-oil emulsification. Compared to whole oil droplet/SPM interactions, dissolved-component/SPM adsorption is not as significant for transport of individual components to sediments. The information presented in this paper can be used to augment computer-based models designed to predict oil-spill trajectories, oil-weathering behavior, and spilled oil impacts to the marine environment.     

A THEORETICAL TRAVEL TIME BASED ON WATERSHED HYPSOMETRY1

ABSTRACT: The time to hydrograph peak of a watershed basin has been found to correlate with various statistical attributes (e.g., skewness and kurtosis) of its hypsometric curve (treated as probability distribution). This paper presents a theoretical travel time that is conceptually analogous to the time to hydrograph peak and can be calculated directly from the hypsometric curve of a watershed basin based on gravity and acceleration. The theoretical travel times for 23 selected watersheds in the United States are found to correlate significantly with their corresponding hypsometric attributes. In addition, the theoretical travel times are consistent with the times of concentration estimated from the Federal Aviation Administration method. Thus, this paper offers a simple theoretical explanation to the empirically identified linkage between time to hydrograph peak and hypsometric attributes. This theoretical travel time can provide an alternative way of characterizing the effects of basin morphometry on hydrologic response.