Improvement of soil aggregate stability by repeated applications of organic amendments to a cultivated silty loam soil

The objective of this study was to compare the effects of repeated field applications of three urban compost amendments and one farmyard manure amendment over a 9-year period on aggregate stability in a silty loam soil initially characterized by low clay and initial organic matter contents and poor aggregate stability. Three different aggregate stability tests with increasing disruptive intensities (fast wetting > mechanical breakdown > slow wetting tests) and different disaggregation mechanisms, were used. All of the amendments, which were applied at approximately 4 Mg C ha⁻¹ every other year, increased the organic carbon content and improved the stability of the aggregates against the disruptive action of water, as determined by each of the stability tests. However, the year-to-year variations in the aggregate stability that related to factors other than the organic inputs were greater than the cumulative increase in aggregate stability relative to the control. The positive effects of the tested amendments on aggregate stability were linked to their contribution to soil organic C contents (r = 0.54 for the fast wetting test and r = 0.41-0.42 for the mechanical breakdown and slow wetting tests; p < 0.05). The addition of urban composts had a larger positive effect on aggregate stability than farmyard manure at the majority of sampling dates. The addition of biodegradable immature compost, such as municipal solid waste (MSW), improved the aggregate stability through an enhanced resistance to slaking. The addition of mature composts, such as the co-compost of sewage sludge and green wastes (GWS) or biowaste compost (BW), improved the aggregate stability by increasing interparticular cohesion. The MSW compost was the most efficient in improving aggregate stability during the first 6 years of the experiment (average improvements of +22%, +5% and +28% in the fast wetting, mechanical breakdown and slow wetting tests, respectively, compared to the control treatment); this result was likely due to the larger labile organic pool of the MSW compost that was highly effective at stimulating soil microbial activity. After the first 6 years, the two other composts, GWS and BW, became more efficient (average improvements of +25%, +61% and +33% in the fast wetting, mechanical breakdown and slow wetting tests, respectively, compared to the control treatment), which was probably linked to the greater increase in soil organic C contents. Therefore, the application of urban compost to silty soil that is susceptible to water erosion was effective at improving aggregate stability and thus could be used to enhance the resistance of soil to water erosion.     

以高岭土为原料合成高稳定性介孔分子筛

以廉价的高岭土和硅酸钠为硅源,用水热法合成了介孔分子筛。采用X射线粉末衍射、Fourier变换红外光谱、热分析、N2物理吸附、扫描电子显微镜和透射电子显微镜埘样品进行了表征,同时研究了样品的热稳定性和水热稳定性。结果表明：长程有序的介孔分子筛平均孔径约为2．75nm：经900℃焙烧3h或100℃水热处理6d,样品的介孔结构不被破坏,说明样品具有高的热稳定性和水热稳定性。     

再悬浮过程中河流底泥PAHs的迁移与释放

利用再悬浮模拟(particle entrainment simulator,PES)装置模拟了河流底泥在受到上层扰动力后的再悬浮过程.结果表明,沉积物性质如粒径组成及PAHs含量对沉积物再悬浮过程中PAHs的释放影响显著.再悬浮过程中上覆水体总悬浮颗粒物(total suspended solids,TSS)含量与颗粒态PAHs之间存在极显著相关关系.切应力对再悬浮过程中PAHs释放的影响体现在两方面.一方面,单位体积的颗粒态PAHs随切应力增大而增大;另一方面,悬浮颗粒上PAHs的富集效应随切应力增大而减弱,是由于切应力强烈导致吸附作用弱的大颗粒进入水体.上覆水体中的PAHs总量在一段时间上升后于120 min或240min趋于稳定,而颗粒态与溶解态之间具有良好响应.高低环PAHs释放行为差异显著,由于中高环PAHs的疏水性,上覆水体中检测到的多为3~4环个体.     

陶粒CANON反应器的接种启动与运行

通过CANON接种污泥,以人工配制无机高氨氮废水为对象,研究以陶粒为填料的CANON反应器启动与运行情况,结果表明:①陶粒可以作为CANON反应器合适填料,温度通过水浴控制在30℃±1℃,HRT为9 h、pH控制在7.00~8.08之间,经过60 d成功启动了CANON反应器,TN的去除负荷达到0.79 kg·(m3·d)-1;②在温度30℃时,陶粒CANON反应器中临界DO范围在1.12~1.69 mg·L-1之间,CANON反应器中短程硝化和厌氧氨氧化性能可维持稳定,高于此范围时,会出现CANON反应器中短程硝化不稳定现象;③在温度25℃,控制DO在1.01~1.54 mg·L-1之间时,尽管NO-3-N变化值与TN变化值的比值(δNO-3-N/δTN)略微偏离理论值0.127,为0.150~0.204,但CANON反应器脱氮性能趋于稳定,TN去除率最高为75.56%,TN的去除负荷最高达到0.97 kg·(m3·d)-1,这意味着CANON工艺的适宜温度范围至少可以降低至25℃.     

土地利用方式对缙云山土壤团聚体稳定性及其有机碳的影响

土壤团聚体对土壤肥力、质量和土壤的可持续利用等有很大的影响,是水、肥保蓄与释供功能的物质基础.通过湿筛法,将缙云山林地、撂荒地、果园和坡耕地这4种土地利用方式土壤进行粒径分组,得到大团聚体(>2 mm)、中间团聚体(0.25~2 mm)、微团聚体(53μm~0.25 mm)以及粉+黏团聚体(<53μm)的质量分数,测定各粒径团聚体中的有机碳含量,并计算0~60 cm土壤深度内各粒径土壤团聚体的有机碳储量.结果表明,土地利用方式对土壤团聚体稳定性及其有机碳具有重要影响.林地的开垦行为会导致大团聚体的破碎化,果园及坡耕地>0.25 mm的大团聚体含量分别为44.62%和32.28%,分别比林地降低38.58%(P<0.05)和91.52%(P<0.05),土壤结构趋于恶化;而坡耕地闲置为撂荒地后,则会促使粉+黏团聚体向粒径大的微团聚体及中间团聚体转化,使土壤结构趋于改善.在0~60 cm土层内,果园及坡耕地土壤颗粒的MWD(平均质量直径)和GMD(几何平均直径)值均显著低于林地(P<0.05),而坡耕地撂荒后,MWD和GMD值均显著升高(P<0.05),表明林地开垦为果园和坡耕地导致土壤团聚体的稳定性降低,容易被水分散,而坡耕地弃耕撂荒会增强团聚体的稳定性,提高土壤抵抗外力破坏的能力.4种土地利用方式下各粒径土壤团聚体有机碳含量均随土壤深度的增加而降低.在0~60 cm的土壤深度内,不同土地利用方式下各粒径土壤团聚体有机碳储量表现为:大团聚体有机碳储量为林地(14.98Mg·hm-2)>撂荒地(8.71 Mg·hm-2)>果园(5.82 Mg·hm-2)>坡耕地(2.13 Mg·hm-2),中间团聚体有机碳储量为撂荒地(35.61 Mg·hm-2)>林地(20.38 Mg·hm-2)>果园(13.83 Mg·hm-2)>坡耕地(6.77 Mg·hm-2),微团聚体有机碳储量为撂荒地(22.44 Mg·hm-2)>林地(10.20 Mg·hm-2)>果园(6.80 Mg·hm-2)>坡耕地(5.60 Mg·hm-2);粉+黏团聚体有机碳储量为撂荒地(22.21 Mg·hm-2)>林地(17.01 Mg·hm-2)>果园(16.70 Mg·hm-2)>坡耕地(9.85 Mg·hm-2).各粒径土壤团聚体内有机碳储量均为林地和撂荒地高于果园和坡耕地,表明将林地开垦为果园和坡耕地后,将导致各团聚体组分内有机碳的损失,而坡耕地撂荒则有助于土壤有机碳的恢复和截存;林地和撂荒地土壤有机碳主要蓄积在中间团聚体内,而果园和坡耕地则主要蓄积在粉+黏团聚体内,表明在土地利用变化过程中,粒径较大的团聚体有机碳不稳定,更容易发生变化.     

氯消毒对再生水可同化有机碳的影响

考察了再生水氯消毒过程中的氯消耗特性及水质特性的变化,发现加氯后5 min,氯消耗速率最大,同时254 nm的紫外吸光度和三维荧光强度的变化最为显著.发现再生水消毒后生物可同化有机碳(AOC)浓度显著增加,说明消毒后水质生物稳定性变差.AOC变化趋势呈现为先增长后降低的趋势,对于不同处理工艺再生水,二级出水的AOC水平普遍高于深度处理出水,但深度出水消毒5 min后AOC的增长率却高于二级出水消毒后的增长率.进一步研究发现,再生水水样消毒后的AOC变化量与三维荧光积分值变化量之间有一定的正相关关系.     

大渡河干海子滑坡稳定性研究

干海子滑坡位于大渡河流域,规模巨大.为研究该滑坡的稳定性,在对滑坡基本特征及变形破坏特征等深入研究的基础上,采用极限平衡法(Geo-slope软件)和有限差分法(FLAC-3D软件)对该滑坡的稳定性和应力应变特征进行了计算、模拟.稳定性计算模拟主要从深层、浅层及局部稳定三方面入手分析,计算模拟结果与滑坡的宏现地质现象均...     

极端冰雪条件下的顺层岩质边坡滑移稳定性分析

推导了典型岩石边坡在极端冰雪条件下的滑移稳定系数的表达式;通过计算分析,揭示了岩石边坡滑移稳定系数随裂隙内水深、坡高、坡角、滑面倾角等因素变化的规律及与冻深的关系,并绘制岩石边坡滑移稳定系数与边坡几何要素之间的关系图.研究表明,当考虑极端冰雪灾害影响时,岩石边坡滑移稳定系数发生较为明显的变化:随裂隙饱水程度、坡面角、主...     

不同构造措施的钢管混凝土边框钢板剪力墙抗震性能试验研究

钢管混凝土边框钢板剪力墙是一种新型抗震剪力墙,为了比较不同构造措施对该新型剪力墙抗震性能的影响,进行了3个剪跨比为1.5的钢管混凝土边框钢板剪力墙低周反复荷载试验.其中,试验模型1为墙体钢板与边框柱钢管焊接,试验模型2为墙体钢板与边框柱钢管螺栓连接,试验模型3为墙体钢板开孔并与边框柱钢管焊接.通过试验研究,比较了各剪力...     

Comparison of criteria for prediction of runaway reactions in the sulphuric acid catalyzed esterification of acetic anhydride and methanol

Loss of temperature control is one of the major reasons that can lead to runaway reaction. This occurrence is commonly named thermal runway. The aim of this paper is the application of thermal runaway criteria in order to predict the onset of runaway phenomena and define the range of stability related to operating conditions in the reactor, with specific reference to the esterification of acetic anhydride and methanol catalysed by sulphuric acid tested in isoperibolic conditions. The isoperibolic calorimeter has also been used to obtain thermodynamic, kinetic and physical chemistry data necessary to develop a model for the reaction. Some runaway criteria applied in this work require a model for the process, so a model for the analyzed system been developed.Because of the modest reaction enthalpy and low activation energy this reacting system provide a severe test to the runaway criteria.In this work, various runaway criteria have been applied to the experimental and simulated data and the results obtained have been compared.