“引江济太”对太湖北部底质及水质总磷的影响

应用GIS技术研究了"引江济太"对太湖北部底质与水质总磷(TP)浓度的影响。研究结果表明,2014—2019年,调水北部沿线4个点位底质TP浓度降幅为59.8%～80.5%;不同点位的水质TP浓度变化存在差异,入湖口点位下降14.1%,沿线其他点位分别上升37.4%、38.6%和45.0%。从空间分布来看,太湖水质TP始终呈明显的"西高东低"分布特点,但底质TP的分布未显示出该类规律。望亭水利枢纽调水情况与入湖口5#点位底质TP浓度呈一定程度的正相关,在调水入湖水量大于出湖水量的年份,5#点位底质TP浓度会偏高。"引江济太"会对太湖北部调水沿线,特别是入湖口附近水域的TP含量产生较大影响,并通过水流迁移与底质再悬浮释放影响下游水域。如何降低望虞河及周边支流的入湖泥沙量将是今后开展科学调水、保障贡湖水源地水质安全的重点研究方向之一。     

Emissions of gaseous and particulate pollutants in a port and harbour region in India

Ports can generate large quantity of pollutants in the atmosphere due to various activities like loading and unloading,transportation, and construction operations. Determination of the character and quantity of emissions from individual sources is an essential step in any project to control and minimize the emissions.In this study a detailed emission inventory of total suspendedparticulate matter (TSP), particulate matter less than 10 m(PM₁₀), sulfur dioxide (SO₂) and nitrogen oxides (NO_x) for a port and harbour project near Mumbai is compiled. Results show that the total annual average contributions of TSP and PM₁₀ from all the port activitieswere 872 and 221 t yr^-1, respectively. Annual average emissions of gaseous pollutants SO₂ and NO_xwere 56 and 397 t yr^-1, respectively, calculatedby using emission factors for different port activities. The maximum TSP emission (419 t yr ^-1) was from paved roads, while the least (0.4 t yr^-1) was from bulk handling activity. The maximum PM₁₀ emission (123 t yr^-1) was from unpaved roads and minimum (0.2 t yr^-1) from bulk handling operations. Similarly the ratio of TSP and PM₁₀ emission was highest (5.18) from paved roads and least (2.17) from bulk handling operations. Regression relation was derivedfrom existing emission data of TSP and PM₁₀ from variousport activities. Good correlation was observed between TSP andPM₁₀ having regression coefficient >0.8.     

炉排型城市生活垃圾焚烧炉排气中二

选择四种规模不同的炉排型生活垃圾焚烧炉,分别对其排放烟气中的二     

氢化物发生原子荧光法测定饮用水中的微量硒

氢化物发生原子荧光法测定饮用水中的微量硒时。仪器条件和试剂的浓度选择很重要。本文对条件的最佳化进行了实验。并对方法的精密度、准确度和检出限进行了讨论。     

Flue gas treatability studies: a tool for techno-economic control of industrial air pollution

Air pollution problems in developing countries have gained larger fraction in the last decade especially due to non functioning and non implementation of effective air pollutioncontrol devices in industries. In industrial wastewater management, adequate treatability studies are conducted to arrive at a techno-economic treatment option. However no suchstudies were done for reducing air pollution or emission fromindustries until now in India. Little information was availableabout such studies in other countries. This article provides information about a novel technique known asflue gas treatability studies and to undertake such studies, a pilot scale system is installed in Air Pollution Control Divisionof M/s National Environmental Engineering research Institute, NEERI, Nagpur-20, India. This study is a tool for techno-economicselection of air pollution control systems specially for small/medium scale industrial emissions.     

An Assessment on Variation of Sulphur Dioxide and Particulate Matter in Erzurum (Turkey)

Sulphur dioxide and PM₁₀ levels are investigated in Erzurum during the periods of 1990–2000 heating season to assess air pollution level. For that reason, emissions of sulphur dioxide and particulate matter were calculated by using consumption of fuels and Turkish emission factors. These emission values were evaluated together with air pollution levels, which were measured at six stations in Erzurum atmosphere during 1990–2000 winter periods. Results reveal that in 1990–1994 heating period, there is an increasing trend in the emissions and air pollution levels over Erzurum, and the air quality limits were not met. The daily 24 h limit (short-term limit) was exceeded 127 days in 1992–1993 winter period. The reason for this increase was found to be the switching to use of low-quality fossil fuels instead of cleaner ones. Results also indicated that there was a considerable decrease in emissions of air pollutants and air pollution levels after 1995. This can be explained by the consumption of more high-quality fossil fuels. The correlation coefficient of SO₂ with PM₁₀ is obtained as r² = 0.85, which is a high value supporting the idea that both pollutants are emitted from the same source.     

Multipoint source method in air pollution modelling of cold start emission

The paper presents a new method of air pollution modelling on a micro scale. For estimation of concentration of car exhaust pollutants, each car is treated as an instantaneous moving emission source. This approach enables us to model time and spatial changes of emission, especially during cold and cool start of an engine. These stages of engine work are a source of significant pollution concentration in urban areas. In this work, two models are proposed: one for the estimation of emission after cold start of the engine and another for the prediction of pollutant concentration. The first model (defined for individual exhaust gas pollutants) enables us to calculate the emission as a function of time after the cold or cool start, ambient temperature and average speed of motion. This model uses the HBEFA database. The second mathematical model is developed in order to calculate the pollutant dispersion and concentrations. The finite volume method is applied to discretise the set of partial differential equations describing wind flow and pollutant dispersion in the domain considered. Models presented in this paper can be called short-term models on a small spatial scale. The results of numerical simulation of pollutant emission and dispersion are also presented.     

地下车库汽车尾气污染源强计算浅析

近年来，地下车库空气污染越来越严重。在建设项目环境影响评价文件中．因为所采用的源强计算公式不同而导致不同的评价结果；所以就三种源强计算经验公式进行对比分析．发现公式二更适合地下车库污染源强的计算。     

GHG emission reductions and costs to achieve Kyoto target

Emission projection and marginal abatement cost curves (MACs) are the central components of any assessment of future carbonmarket, such as CDM (clean development mechanism) potentials, carbon quota price etc. However, they are products of very complex,dynamic systems driven by forces like population growth, economic development, resource endowments, technology progress and so on. The modeling approaches for emission projection and MACs evaluation were summarized, and some major models and their results were compared.Accordingly, reduction and cost requirements to achieve the Kyoto target were estimated. It is concluded that Annex I Parties‘ total reduction requirements range from 503--1304 MtC with USA participation and decrease significantly to 140--612 MtC after USA‘ s withdrawal. Total costs vary from 21--77 BUSD with USA and from 5--36 BUSD without USA if only domestic reduction actions are taken. The costs would sharply reduce while considering the three flexible mechanisms defined in the Kyoto Protocol with domestic actions‘ share in the all mitigation strategies drons to only 0--16%.     

On the determination of nitrous oxide emission factor during biomass burning

ＯｎｔｈｅｄｅｔｅｒｍｉｎａｔｉｏｎｏｆｎｉｔｒｏｕｓｏｘｉｄｅｅｍｉｓｓｉｏｎｆａｃｔｏｒｄｕｒｉｎｇｂｉｏｍａｓｓｂｕｒｎｉｎｇＣａｏＭｅｉｑｉｕ；ＺｈｕａｎｇＹａｈｕｉ（ＲｅｓｅａｒｃｈＣｅｎｔｅｒｆｏｒＥｃｏ－ＥｎｖｉｒｏｎｍｅｎｔａｌＳｃｉ...