气相分子吸收光谱法测定氨氮校准曲线斜率、截距参考值研究

主要阐述了气相分子吸收光谱法测定氨氮的校准曲线斜率、截距参考值的分析.文章收集了临安市环境监测站实验室自2012年以来气相分子吸收光谱法氨氮校准曲线制作的一系列原始数据,并通过数理统计方法对校准曲线、残余标准偏差、斜率扩展不确定度、截距扩展不确定度开展了详细讨论,得出气相分子吸收光谱法氨氮校准曲线截距a值、斜率b值实验室参考值.此结果对实验室分析人员判定氨氮项目校准曲线制作是否合格具有一定的参考价值.     

地壳元素铁的吸光贡献对黑碳吸光增强估算的影响——以武汉为例

传统方法使用固定的波长吸收指数来估算地壳元素或棕碳吸光,但该方法只能处理仅存在两种组分的情形(黑碳/棕碳,或黑碳/地壳元素)的吸光贡献,存在较大不确定性.为此,本文提出一种新的方法,利用武汉在线观测数据(2021年2、3、8、9月),采用铁作为地壳元素的示踪物,利用最小相关系数法(MRS)得出地壳元素的吸光贡献,在扣除地壳元素吸光之后,再得到黑碳吸光增强系数(E_abs).结果显示观测期间370nm波段地壳元素吸光贡献均值为12.3%,月均值范围5.7%~15.5%,且波长吸收指数与铁的浓度正相关,表明地壳元素吸光贡献不可忽视.地壳元素吸光贡献呈现出显著的季节特征,呈现出冬季低,春季高的特点.地壳元素吸光的分离前后计算的E_abs存在一定的差异,受到了黑碳和铁的相关性的影响.观测期间扣除地壳元素吸光后,E_abs均值为1.43±0.53,在季节性上呈现春夏高,秋冬低的特性,春季较高E_abs值与春季黑碳较高的老化程度有关.E_abs对无机盐和有机物的含量存在正的依赖关系,证明了这些包裹物质对吸光增强的影响.     

Strategies for improving the photocatalytic performance of metal-organic frameworks for CO2 reduction: A review

Photocatalytic CO₂ reduction is an appealing strategy for mitigating the environmental effects of greenhouse gases while simultaneously producing valuable carbon-neutral fuels. Numerous attempts have been made to produce effective and efficient photocatalysts for CO₂ reduction. In contrast, the selection of competitive catalysts continues to be a substantial hindrance and a considerable difficulty in the development of photocatalytic CO₂ reduction. It is vital to emphasize different techniques for building effective photocatalysts to improve CO₂ reduction performance in order to achieve a long-term sustainability. Metal-organic frameworks (MOFs) are recently emerging as a new type of photocatalysts for CO₂ reduction due to their excellent CO₂ adsorption capability and unique structural characteristics. This review examines the most recent breakthroughs in various techniques for modifying MOFs in order to improve their efficiency of photocatalytic CO₂ reduction. The advantages of MOFs using as photocatalysts are summarized, followed by different methods for enhancing their effectiveness for photocatalytic CO₂ reduction via partial ion exchange of metal clusters, design of bimetal clusters, the modification of organic linkers, and the embedding of metal complexes. For integrating MOFs with semiconductors, metallic nanoparticles (NPs), and other materials, a number of different approaches have been also reviewed. The final section of this review discusses the existing challenges and future prospects of MOFs as photocatalysts for CO₂ reduction. Hopefully, this review can stimulate intensive research on the rational design and development of more effective MOF-based photocatalysts for visible-light driven CO₂ conversion.     

Heavy metal bioaccumulation in selected medicinal plants collected from Khetri copper mines and comparison with those collected from fertile soil in Haridwar,India

Heavy metal distribution in medicinal plants is gaining importance not only as an alternative medicine, but also for possible concern due to effects of metal toxicity. The present study has been focused on emphasizing the heavy metal status and bioaccumulation factors of V, Mn, Fe, Co, Cu, Zn, Se (essential metals) and Cr, Ni, Cd, As and Pb (potentially toxic metals) in medicinal plants grown under two different environmental conditions e.g., near to Khetri copper mine and those in fertile soils of Haridwar, both in India, using Instrumental Neutron Activation Analysis (relative method) and Atomic Absorption Spectrometry. The copper levels in the medicinal plants from Khetri were found to be 3-4 folds higher (31.6–76.5 mg kg^?1) than those from Haridwar samples (7.40–15.3 mg kg^?1), which is correlated with very high copper levels (763 mg kg^?1) in Khetri soil. Among various heavy metals, Cr (2.60–5.92 mg kg^?1), Cd (1.47–2.97 mg kg^?1) and Pb (3.97–6.63 mg kg^?1) are also higher in concentration in the medicinal plants from Khetri. The essential metals like Mn (36.4–69.3 mg kg^?1), Fe (192–601 mg kg^?1), Zn (24.9–49.9 mg kg^?1) and Se (0.13–0.91 mg kg^?1) and potentially toxic metals like Ni (3.09–9.01 mg kg^?1) and As (0.41–2.09 mg kg^?1) did not show much variations in concentration in the medicinal plants from both Khetri and Haridwar. The medicinal plants from Khetri, e.g., Ocimum sanctum, Cassia fistula, Withania somnifera and Azadirachta Indica were found rich in Ca and Mg contents while Aloe barbadensis showed moderately high Ca and Mg. Higher levels of Ca-Mg were found to correlate with Zn (except Azadirachta Indica). The bioaccumulation factors (BAFS) of the heavy metals were estimated to understand the soil-to-plant transfer pattern of the heavy metals. Significantly lower BAF values of Cu and Cr were found in the medicinal plants from Khetri, indicating majority fraction of these metals are precipitated and were immobilized species unsuitable for plant uptake. Overall, Withania somnifera (Ashwagandha) showed very high metal bioaccumulation.     

Absorption characteristics of new solvent based on a blend of AMP and 1,8-diamino-p-menthane for CO2 absorption

Aqueous 1,8-diamino-p-menthane (KIER-C3) and commercially available amine solutions were tested for CO₂ absorption. A 2-amino- 2-methyl-1-propanol (AMP) solution with an addition of KIER-C3 showed 9.3% and 31.6% higher absorption rate for CO₂ than the AMP solution with an addition of monoethanolamine (MEA) and ammonia (NH₃), respectively. The reaction rate constant for CO₂ absorption by the AMP/KIER-C3 solution was determined by the following equation: k_2,AMP/C3 = 7.702×10⁶ exp (-2248.03/T). A CO₂ loading ratio of the AMP/KIER-C3 solution was also 2 and 3.4-times higher than that of the AMP/NH3 solution and the AMP/MEA solution, respectively. Based on the experimental results, KIER-C3 may be used as an excellent additive to increase CO₂ absorption capability of AMP.     

运用三维荧光光谱解析高温厌氧产氢反应过程对温度变化的响应

为建立反应器运行状态的荧光光谱快速监测方法,应用三维荧光光谱表征了高温厌氧反应器的出水,采用平行因子分析方法分析后得到3种荧光组分——蛋白质、辅酶NADH和核黄素,并获得它们的激发发射光谱图及相对浓度.结果表明,当温度从50 ℃上升到60 ℃的过程中,3种荧光物质的相对浓度均呈现相应的变化,它们与反应器的运行参数呈现明显相关性.进一步研究表明,核黄素是高温厌氧产氢反应中的特有荧光物质,采用标准加入法和二阶校正方法可以测定其实际浓度,出水中核黄素浓度变化范围为0.04~0.13 mg·L^-1.该研究为厌氧产氢反应器的运行监控提供了理论基础.     

博斯腾湖夏季水下光场特征分析及影响因素探讨

2011年8月,在新疆博斯腾湖17个站点进行水样采集,同步对11个站点进行水下光场原位测定.结果发现,博斯腾湖夏季总颗粒物吸收系数光谱表现出明显的浮游植物吸收特征,而浮游植物光谱曲线有明显的硅藻吸收光谱特征.在光合有效辐射波段,有色可溶性有机物（CDOM）吸收系数与浮游植物吸收系数对总吸收的贡献相当,而非色素颗粒物对总吸收的贡献最低.水下光谱衰减系数的最小值出现在580nm左右的绿光波段,PAR漫射衰减系数平均值为0.53m-1,平均真光层深度约为9.69m,大于湖水平均深度.在博斯腾湖虽然纯水和CDOM在总吸收中占有很重要的部分,但主导漫射衰减的因子仍为颗粒物.通过本文研究,以期能为干旱地区湖泊环境保护和水质遥感监测提供数据和理论基础.     

改进测定水中氨氮分子吸收光谱法的试验研究

水中氨氮含量是反应水质状况的重要指标。文章对测定水中氨氮气相分子吸收光谱法(标准号HJ/T195-2005)进行了改进试验研究。第一,对氧化剂的配比进行了改进,使氨氮的测定范围扩展至100μg。第二,对标准HJ/T195-2005中直接使用亚硝酸钠标准溶液做标准曲线的处理方式也做了探讨。通过一系列对比实验认为,应用硫酸铵标准溶液做工作曲线更加准确合理。最后应用改进后的气相分子吸收光谱法和纳氏比色法或滴定法对多种实际废水样品进行同时测定。结果表明,改进后的气相分子吸收光谱法测定氨氮的范围更宽,灵敏度更高和准确度更好。     

复合吸收技术净化复杂工业有机废气

以低浓度、大风量、含无机物、尘粒和油分等成分的复杂工业有机废气为对象,进行复合吸收净化技术的研究,从吸收机制初步探索,对净化设备、工艺流程及工程应用分别进行了探讨.分别以3种不同的表面活性剂溶液为复合吸收剂,考察其处理含甲苯和醋酸丁酯废气的净化效果,结果表明降低复合吸收剂的表面张力,有利于甲苯和醋酸丁酯的去除率.针对复杂工业有机废气,开发高效吸收设备,集合了水膜、旋流板和填料3种吸收净化装置的优点于一体,具有结构简单、体积小、防堵塞及多级高效吸收传质的优势.工艺流程以吸收技术为主,整合了加热吹脱、燃烧和厌氧等工艺,最终使废气和吸收尾液达标排放.该技术已在制造、喷涂等多家企业的工程上应用.     

查干湖和新立城水库秋季水体悬浮颗粒物和CDOM吸收特性

分别于2012年9月对不同盐度水体的查干湖和新立城水进行水体野外采样和室内实验分析,通过测定颗粒物、CDOM等光学活性物质的吸收系数来对比分析两种水体的光学活性物质的吸收特性、来源及其在400~700 nm范围内对总吸收系数的贡献.结果表明,综合营养状态评价指数显示秋季查干湖、新立城水库水体属于中等富营养化,总悬浮颗粒物的吸收光谱表现均与色素类颗粒物吸收光谱相似.对于盐度较大的查干湖水体(EC=988.87μS·cm~(-1)),非藻类颗粒物占主导地位,各组分贡献率为非藻类颗粒物色素颗粒物CDOM;而盐度较低的新立城水库水体(EC=311.67μS·cm~(-1)),色素颗粒物贡献率略大于非藻类颗粒物贡献,各组分贡献率依次为:色素颗粒物非藻类颗粒物CDOM.查干湖总悬浮颗粒物吸收系数α_p(440)、α_p(675)和非藻类颗粒物吸收系数α_d(440)分别与TSM(总悬浮颗粒物)、ISM(无机悬浮颗粒物)和OSM(有机悬浮颗粒物)、Chl-a(叶绿素a)相关性均较好,相关系数在0.55以上;新立城水库α_p(440)、α_p(675)与Chl-a相关性较好(0.77和0.85,P0.05),α_d(440)与ISM具有相关性(0.74,P0.01),与OSM表现为负相关(-0.63,P0.05).查干湖CDOM吸收系数a_g(440)仅与OSM表现为负相关性(-0.54,P0.05),而新立城水库α_g(440)与其他参数均无相关性.通过对CDOM吸收曲线在250~400 nm的拟合所得到的S_g以及相对分子量M_r发现,查干湖的S_g[(0.021±0.001)m~(-1)]大于新立城的S_g[(0.017 6±0.001)m~(-1)],而CDOM的相对分子量M_r值分别为11.44±2.00(7.5~15.09)、7.53±0.79(6.17~8.89),查干湖M_r值高于新立城水库水体,表明查干湖CDOM组成较新立城水体中CDOM的分子量小,组成更趋向于小分子.查干湖受风速和湖岸坍塌的影响产生矿物悬浮、沉积微粒,水体颗粒物以非藻类为主,部分来自于浮游植物降解产物;新立城水库水体不仅有径流携带的陆源性无机物的输入,同时水体浮游植物生长减弱且微生物分解活动加强,降解有机颗粒物与非藻类吸收系数呈现负相关.