广州市城区站点冬季PM2.5时间变化及碳氮同位素组成特征

于2018年冬季在广州城区磨碟沙站点开展细颗粒物(PM_2.5)样品采集,并获得PM_2.5中水溶性离子、含碳组分、稳定碳氮同位素的组成及时间变化特征,重点讨论了PM_2.5浓度升高时段的化学组成特征变化,进而利用稳定碳氮同位素变化特征探究了主要污染来源。结果表明：采样期间,研究站点PM_2.5平均质量浓度为22.1μg/m³,共出现两个PM_2.5浓度水平升高时段,所对应的平均质量浓度分别达46.0μg/m³和63.0μg/m³。风速降低、温度升高等不利气象条件是导致上述时段PM_2.5浓度上升的重要原因。在上述时段,伴随着PM_2.5浓度的升高,NO^-₃和NH⁺₄浓度均出现显著升高,NO^-₃与SO^2-₄的摩...     

基于Logistic的不同车型碰撞行人事故严重程度致因分析

为定量分析不同车型碰撞行人事故严重程度影响因素,以美国北卡罗来纳州2007-2016年人车碰撞事故数据为样本,将其分为小轿车、SUV、货车碰撞行人事故3类,以事故严重程度为因变量,交通参与者属性、道路、环境条件和事故特征为候选自变量,分别建立累计logistic模型进行对比分析,探究人、车、路和环境因素对人车碰撞事故严...     

汽车环境风洞降雨模拟影响因素研究

目的 研究自然界降雨量与汽车环境风洞模拟降雨量之间的关系,得到中国气象条件的雨量设定经验公式,为汽车环境风洞模拟降雨量的设定提供理论依据。方法 理论分析自然界气象降雨和汽车环境风洞模拟降雨的特点和差异,研究影响汽车环境风洞模拟降雨量的因素。结果 在无风条件下,影响汽车环境风洞降雨量的因素有气象降雨量、前挡风玻璃倾角、雨滴直径和车速等。按照车速将降雨分为汽车停止和汽车行驶2种模式,提出结合中国气象条件的汽车环境风洞模拟降雨量的经验公式。结论 在相同降雨等级下,汽车停止状态下的汽车环境风洞降雨量一般大于车辆行驶状态。在气象降雨量等级为短时中雨时,行驶汽车的雨量设定值与车速呈指数增长关系。     

Age group differences in collision risk

Introduction

The purpose of the current study was to examine differences in factors associated with self-reported collision involvement of three age groups of drivers based on a large representative sample of Ontario adults. Method: This study was based on data from the CAMH Monitor, an ongoing cross-sectional telephone survey of Ontario adults 18 years and older from 2002 to 2005. Three age groups were examined: 18-34 (n = 1,294), 35-54 (n = 2,428), and 55+ (n = 1,576). For each age group sample, a logistic regression analysis was conducted of self-reported collision involvement in the last 12 months by risk factor measures of driving exposure (kilometers driven in a typical week, driving is stressful, and driving on busy roads), consuming five or more drinks of alcohol on one occasion (past 12 months), cannabis use (lifetime, and past 12 months), and driving after drinking among drinkers (past 12 months), controlling for demographics (gender, region, income, and marital status). Results: The study identified differences in factors associated with self-reported collision involvement of the three age groups of adult drivers. The logistic regression model for the youngest group revealed that drivers who reported that driving was stressful at least some of the time, drank five or more drinks on an occasion, and drove after drinking had an increased risk of collision involvement. For the middle age group, those who reported using cannabis in the last 12 months had significantly increased odds of reporting collision involvement. None of the risk factor measures showed significant associations with collision risk for older drivers (aged 55+). Impact: The results suggest potential areas for intervention and new directions for future research.     

Effect of enhanced seat belt reminders on driver fatality risk

Objective

Enhanced seat belt reminders in automobiles have been shown to increase belt use rates by approximately 3 percentage points. The objective of this study was to estimate the effect of enhanced seat belt reminders on driver fatality risk.

Method

Data included all passenger vehicle driver deaths and vehicle registration counts in the United States for calendar years 2000-2007. Driver fatality rates per vehicle registration per year were compared for otherwise identical vehicle models with and without enhanced seat belt reminders.

Results

Driver fatality rates were 6% lower for vehicles with enhanced seat belt reminders compared with vehicles without enhanced belt reminders. After adjusting for vehicle age differences, the estimated effect of enhanced belt reminders on driver fatality risk ranged from a 9% reduction for General Motors vehicles to a 2% increase for Honda vehicles. Combining all manufacturers, enhanced belt reminders reduced fatality risk by approximately 2%. Although not statistically significant, the 2% reduction in fatality risk agrees with what should be expected from a 3 percentage point increase in seat belt use rates.

Conclusions

Enhanced seat belt reminders have raised driver belt use rates and reduced fatality rates, but more aggressive systems may be needed for some drivers. It can be inferred that nonfatal injury rates also have been reduced.

Impact on Industry

Manufacturers should be encouraged to put enhanced seat belt reminders on all vehicles as soon as possible.     

北京地区第五阶段在用轻型车OBD监测频率的特征分析

随机采集北京地区200辆满足第5阶段排放标准在用车的车载诊断系统（OBD）的IUPR（OBD监测频率）数据,测试了4种典型车系的在用车在实际道路行驶工况下IUPR各监测项的特征分布,并和NEDC工况下的实验结果进行对比.结果表明：采集数据车辆的OBD系统均能实现对催化器和氧传感器的监控,对EGR和次级氧传感器的监控也可分别达到74%和91%;在用车平均点火循环3.9次才能满足一次目前IUPR的监测条件;各监测项IUPR均值均远大于国五标准限值0.10,但各IUPR监测值分布存在差异,催化转化器和氧传感器的达标率均为92%;实验室NEDC模拟工况基本能实现对各车系机动车尾气排放控制的监测,但4条实际道路测试结果则表明不同车系IUPR监测项分子+1的差异较大;拥堵路况的低速工况下OBD系统难以实现对车辆尾气排放控制系统各监测项的有效监测.因此,需结合北京实际路况进一步完善在用车辆OBD系统的监测条件,实现对北京在用车尾气排放控制系统的有效监控.     

南京市机动车排放VOCs的污染特征与健康风险评价

在南京富贵山隧道开展机动车排放的挥发性有机物(VOCs)对环境及人群健康的影响研究,对VOCs浓度水平与变化特征、组成与化学反应活性进行了分析,并通过美国环境保护局(US EPA)的健康风险评价模型对VOCs的健康风险进行了评价.结果表明,隧道进口与出口空气中共检测出93种物质,隧道进口处样品的总VOCs浓度(87.28±7.08)μg/m3;隧道出口处总VOCs浓度(225.63±59.19)μg/m3.隧道出口检测到的烷烃和芳香烃这两类物质浓度比进口浓度高.隧道进口与出口处的VOCs总臭氧生成潜势为101.48μg O3/m3和402.01μg O3/m3.健康风险评价结果表明,隧道进口处14种主要VOCs的非致癌风险危害商值(HQ)在8.07×10-5~2.66×10-1之间,而在隧道出口处的HQ范围为3.18×10-4~2.92×10-1.隧道进口与出口处的VOCs的非致癌风险危险指数(HI)均小于1,非致癌风险值在安全范围之内.但1,3-丁二烯、氯仿、四氯化碳、苯和1,1,2-三氯乙烷的致癌风险较大,对人体健康具有明显的影响.     

2006—2012年广东省机动车尾气排放特征及变化规律

利用广东省年鉴及实地调查资料,基于COPERT Ⅳ模型计算并分析了2006─2012年广东省珠三角和非珠三角地区的机动车尾气排放清单. 结果表明:研究地区2006─2012年机动车保有量上升,国Ⅲ、国Ⅳ车辆所占比例提高,其中珠三角地区优化程度大于非珠三角地区;2006─2012年2个地区污染物(CO、VOC、NO_x、PM_2.5)排放因子均有降低,降幅在24.54%~57.89%之间. 机动车污染物排放量上升趋势及贡献特征地区性差异明显,2006─2012年非珠三角地区CO、VOC排放量分别上升了37.20%、26.93%,增幅高于珠三角地区,而珠三角地区2012年的NO_x、PM_2.5排放量增幅(分别为21.65%、14.60%)高于非珠三角地区. 轻型客车是2个地区CO和VOC的主要贡献车型,贡献率均达46.96%以上,并且处于上升状态,但珠三角地区增幅小于非珠三角地区;重型客车和重型货车是2个地区NO_x、PM_2.5的主要来源,贡献率均在40.78%以上.      

杭州市区机动车污染物排放特征及分担率

选取杭州市区绕城高速、快速路、主干道和民用支路4种典型道路进行工况测试,建立了2010年机动车CO、HC、NOx和PM10排放清单,获得了分车型、燃料类型、排放标准以及道路类型的机动车污染物排放分担率.结果表明,杭州市机动车的污染物排放分担率差别显著,乘用车、出租车和公交车是CO和HC排放的主要来源,重型货车和公交车是NOx和PM10排放的主要来源,且乘用车的NOx排放分担率也较大;柴油车的NOx和PM10的排放分担率远大于其保有量的贡献率,是其排放的主要来源,汽油车是CO和HC排放的主要来源;占保有量30%的国0和国I车辆,对CO、HC、NOx和PM10排放分担率分别为67%、69%、58%和82%;主干道是机动车CO、HC和NOx排放的主要来源,其排放分担率分别为66%、65%和64%,民用支路是PM10排放的主要来源,分担率为55%.     

热闷钢渣用单轨移动罩车的设计

根据钢渣热闷工艺要求进行单轨移动罩车的结构设计与行走装置的设计,通过三维建模软件及理论力学分析计算此罩车的配重及质心,使罩车与导向装置接触处的压力最小,且罩车施加给低地轨的横向静摩擦力最小。通过此方法设计的单轨移动罩车能大大改善钢渣热闷厂房的工作环境,减少厂房的腐蚀,提高厂房屋顶的寿命周期。