太湖春季和秋季蓝藻光合作用活性研究

采用Phyto-PAM浮游植物分析仪测定太湖蓝藻光合作用活性的时空间分布.结果表明,太湖蓝藻光合活性具有显著的时空差异:春季蓝藻的最大光量子产量F_v/F_m (可变荧光和最大荧光之比)和实际光量子产量F_v'/F_m'分别在0.35~0.49和0.16~0.29之间,秋季蓝藻分别在 0.33~0.53和0.21~0.43之间,太湖秋季蓝藻的最大光合作用能力和实际光合作用能力大于春季蓝藻.春季和秋季蓝藻的非光化学淬灭NPQ(non-photochemical quenching)分别在0.012~0.17和0.035~0.26之间,秋季蓝藻的NPQ高于春季蓝藻,说明秋季蓝藻的自我保护能力高于春季蓝藻.快速光响应曲线(Rapid light curve, RLC)的特征参数表明春季蓝藻的光能利用效率、最大电子传递速率和光饱和强度点高于秋季蓝藻;从空间分布来看,蓝藻的最大光合作用能力、实际光合作用能力和光合作用效率在营养水平低和有水草分布的湖区相对较低,富营养化水平高的湖区则相对较高.因此,降低太湖营养盐浓度,恢复水生植物,能够抑制蓝藻的光合作用活性和生长,从而降低蓝藻水华强度.     

羧基化碳纳米管载铂催化剂对微生物燃料电池阴极氧还原性能的影响

阴极催化剂是影响微生物燃料电池(microbial fuel cell,MFC)性能的关键要素.为了考察不同羧基化方法改性的碳纳米管(carbon nanotube,CNT)负载Pt的催化氧还原效率,分别在80℃和95℃条件下对CNT进行了羧基化,采用浸渍-沉淀法制备了Pt/CNT催化剂(Pt/CNT-80和Pt/CNT-95),并在空气阴极MFC体系中验证了其催化氧还原效果(MFC-80、MFC-95和MFC-C).结果表明,MFC-95和MFC-80的最大功率密度分别为568.8 mW.m-2和412.8 mW.m-2,内阻分别为204.7Ω和207.7Ω,开路电压分别为0.719 V和0.651 V.而对照MFC-C的最大功率密度仅为5.4 mW.m-2,内阻为826.2Ω.XPS和XRD分析结果显示,Pt/CNT-95催化氧还原效果优于Pt/CNT-80,原因可能是95℃羧基化过程在CNT表面引入了丰富的含氧基团.     

Photocatalytic activity of TiO2 containing anatase nanoparticles and rutile nanoflower structure consisting of nanorods

A series of TiO2 with different crystal phases and morphologies was synthesized via a facile hydrothermal process using titanium nbutoxide and concentrated hydrochloric acid as raw materials. The photocatalytic activity of the samples was evaluated by degradation of Methyl Orange in aqueous solution under UV-Visible light irradiation. On the basis of detailed analysis of the characterizing results of high-resolution transmission electron microscopy, X-ray powder diffraction measurements, X-ray photoelectron spectroscopy and Brunauer-Emmett-Teller measurement, it was concluded that the photo-activity of the catalyst is related directly to the 3D morphology and the crystal phase composition. An excellent catalyst should have both a futile 3D flower-like structure and anatase granulous particles. The 3D flower-like structure could enhance light harvesting, as well as the transfer of reactant molecules from bulk solution to the reactive sites on TiO2. In addition, the optimum anatase/rutile phase ratio was found to be 80：20, which is beneficial to the effective separation of the photogenerated electron-hole pairs.     

Enhanced photocatalytic activity of quantum-dot-sensitized one-dimensionally-ordered ZnO nanorod photocatalyst

An efficient photocatalyst was fabricated by assembling quantum dots （QDs） onto one-dimensionally-ordered ZnO nanorods, and the photocatalytic properties for Methyl Orange degradation were investigated by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, UV-Vis-NIR absorption spectroscopy and photoluminescence. The results indicate that the catalyst with assembled QDs is more favorable for the degradation than the pristine ZnO nanorods. The QDs with core-shell structure lower the photocatalytic ability due to the higher carder transport barrier of the ZnS shell layer. Besides its degradation efficiency, the photocatalyst has several advantages given that the one-dimensionally-ordered ZnO nanorods have been grown directly on indium tin oxide substrates. The article provides a new method to design an effective and easily recyclable photocatalyst.     

Waste oyster shell as a kind of active filler to treat the combined wastewater at an estuary

Estuaries have been described as one of the most difficult environments on Earth. It is difficult to know how to treat the combined wastewater in tidal rivers at the estuary, where the situation is very different from ordinary fresh water rivers. Waste oyster shell was used as the active filler in this study in a bio-contact oxidation tank to treat the combined wastewater at the Fengtang Tidal River. With a middle-experimental scale of 360 ma/day, the average removal efficiency of COD, BOD, NH3-N, TP and TSS was 80.05%, 85.02%, 86.59%, 50.58% and 85.32%, respectively, in this bio-contact oxidation process. The living microbes in the biofilms on the waste oyster shell in this bio-contact oxidation tank, which were mainly composed of zoogloea, protozoa and micro-metazoa species, revealed that waste oyster shell as the filler was suitable material for combined wastewater degradation. This treatment method using waste oyster shell as active filler was then applied in a mangrove demonstration area for water quality improvement near the experiment area, with a treatment volume of 5 × 10^3 m^3/day. Another project was also successfully applied in a constructed wetland, with a wastewater treatment volume of 1 ×10^3 m^3/day. This technology is therefore feasible and can easily be applied on a larger scale,     

铋-镧复合氧化物的制备与光催化活性

以同时含La(Ⅲ)和B(iⅢ)的双金属配合物BiLa(dtpa)(NO3).3.5H2O为前驱体,通过500℃的热分解制得铋-镧复合氧化物Bi0.775La0.225O1.5,并利用XRD、SEM和UV-Vis漫反射等分析手段研究灼烧时间对样品的结构及光吸收特性的影响。以甲基橙模拟废水的光催化降解为模型,研究不同灼烧时间对铋-镧复合氧化物光催化活性的影响。结果表明,热分解所得铋-镧复合氧化物样品呈疏松多孔结构,对光具有较宽的吸收范围,在紫外光区具有较好的光催化活性,灼烧时间影响样品的粒径和形貌以及光催化效果,在20 mg/L甲基橙溶液中添加灼烧1 h和4 h所得的催化剂样品1 g/L,光照4 h后甲基橙褪色率分别达95%和91%。     

磁性多孔陶粒生物膜反应器处理焦化废水的试验研究

以磁性材料为原料,经过特定的工艺处理,对多孔陶瓷进行磁化改性获得磁性多孔载体,并将该载体应用于生物膜反应器中进行焦化废水处理试验。对不同类型的多孔陶粒载体进行对比试验,结果表明:磁性载体生物膜反应器对COD、NH3-N的去除率比普通活性污泥法高出25%³0%,比非载体生物膜反应器高出15%30%,比非载体生物膜反应器高出15%²0%左右。反应器的曝气量为1.5 L/h,曝气时间为10 h/d,温度为2520%左右。反应器的曝气量为1.5 L/h,曝气时间为10 h/d,温度为25³0℃。焦化废水经磁性载体生物膜反应器处理后,上清液中COD,NH3-N的去除率均在90%左右。出水浓度达到国家工业废水排放二级标准(GB18918-2002)。     

凹凸棒石基复合材料处理印染废水的研究

以凹凸棒石为载体,钛酸四丁酯为原料,通过溶胶-凝胶法,制成TiO2/凹凸棒石基复合材料(TiO2/ATT),并对所制得的复合材料进行了XRD和BET表征。在波长为254 nm的16 W紫外灯光照下,以活性黑KN-B印染废水为脱色对象,分别探讨了TiO2/凹凸棒石复合材料的煅烧温度、投加量、活性黑KN-B染料的初始浓度、溶液的pH值和反应温度等因素对印染废水脱色率的影响。实验结果表明:用煅烧温度500℃的TiO2/凹凸棒石基复合材料处理活性黑KN-B印染废水,催化剂的投加量为15 g/L、活性黑KN-B的初始浓度为10 mg/L、pH小于7、反应温度为20℃时,光催化反应4 h内即能达到较高的去除率,对活性黑KN-B的脱色率可达95%以上。     

活性焦烟气脱硫技术在大型燃煤电站的应用

本文通过分析活性焦烟气脱硫技术的主要原理、工艺流程、主要原料消耗、脱硫副产品综合利用、SO2污染物达标情况,探讨该技术在内蒙古地区大型燃煤电站脱硫工程应用的可行性.     

UV-Fenton体系处理活性黑KNB染料废水的实验研究

采用UV-Fenton体系处理活性黑KNB染料废水.研究了pH值、H2O2和FeSO4用量、反应温度和反应时间等对染料废水脱色率的影响.实验结果表明,当KNB的初始浓度为50mg/L时,在t=25℃、pH =5.4、[H2O2]=0.2ml/L,[FeSO4]=0.7mmol/L,使用30W的紫外灯光照射条件,反应1小时后,KNB染料废水脱色率几乎可达100％.通过比较反应前后染料废水的UV-Vis吸收光谱,初步探讨了KNB的降解机理.研究表明,UV-Fenton体系可以有效地处理活性黑KNB染料废水,为该工艺处理实际染料废水提供基础数据.