GEOLOGIC INFERENCE FROM “FLOW NET” TRANSMISSIVITY DETERMINATION: THREE CASE STUDIES1

A graphical inverse method for determining the regional transmissivity distribution was applied to three field problems. The study areas were the Hanford Site, Washington; the Rocky Mountain Arsenal, Colorado; and the Nevada Test Site, Nevada. This method can aid in flow system conceptualization by revealing the location of bedrock controls for groundwater flow. It is a valuable tool for aiding the hydrogeologist in asking questions about the nature of trends in the pattern of transmissivity values. Quantitative estimates of regional transmissivities can be used as starting points for further parameter refinement. Sensitivity analysis using Monte Carlo simulation shows that quantitative estimates of transmissivity can be obtained when measurement error in the hydraulic head does not cause a large error in the hydraulic gradient.     

Groundwater mapping: An analysis of the United States Hydrological Investigation Atlas Series

Groundwater mapping is a critical component of efficient water resource management today. Difficulties arise when highly specialized and complex groundwater data are collected and presented in map form. This is an analysis of the map content and its presentation in the USGS Hydrological Investigation Atlas Series. This analysis reveals the problems to be surmounted in mapping groundwater information. The technical nature of the groundwater data requires special design considerations.     

Evaluation of methods for determining adverse impacts of air pollution on terrestrial ecosystems

Methods used to determine adverse impacts of air pollution on four levels of biological organization of terrestrial ecosystems were evaluated for their use in decision making by federal land managers of class I areas and as guidelines for scientists employed to design field studies in these areas. At the level of the individual, visible injury, biomass, and sulfur uptake were the most often used components; at the population level, natality and mortality; at the community level, diversity; and at the ecosystem level, biogeochemical cycling. Most studies focused on structural responses of individual organisms. These components are relatively sensitive and are easy and inexpensive to measure; however, linkages of these parameters to adverse impacts on populations, communities, or ecosystems are lacking. Measurements of effects of air pollution at the higher levels of organization are confounded by natural variability, long response times, climatic variation, pathogens, and other factors. In addition, the lack of replication and of true control areas creates severe problems for design of monitoring programs and testing of hypotheses concerning effects.     

RUNOFF PREDICTION USING REMOTE SENSING IMAGERY1

ABSTRACT: Percent imperviousness is an important parameter in modeling the urban rainfall-runoff process and is usually determined using manual methods such as random sampling or conventional accounting methods. In this study two computerized methods are used for estimating the percent imperviousness of urban watersheds using high altitude remote sensing imagery. These methods include the Laser Image Processing Scanner and the Video-Tape Camera system. Imperviousness is directly estimated in the former method while in the latter it is estimated as a function of the statistics of the responses on emulsions of the imagery. The percent imperviousness computed by utilizing remote sensing imagery was used with the conceptual models of rainfall-runoff models. The models were applied to four urban watersheds and the runoff prediction results indicate that imperviousness determined by using remote sensing imagery was as accurate as that obtained by the manual methods, and that the use of remote sensing imagery requires significantly less time and money.     

UNCERTAINTY ANALYSIS OF BMP EFFECTWENESS FOR CONTROLLING NITROGEN FROM URBAN NONPOINT SOURCES1

ABSTRACT: The effectiveness of urban Best Management Practices (BMPs) in achieving the No-Net-Increase Policy (NNTP), a policy designed to limit nonpoint nitrogen loading to Long Island Sound (US), is analyzed. A unit loading model is used to simulate annual nitrogen exported from the Norwalk River watershed (Connecticut) under current and future conditions. A probabilistic uncertainty analysis is used to incorporate uncertainty in nitrogen export coefficients and BMP nitrogen removal effectiveness. The inclusion of uncertainty in BMP effectiveness and nitrogen export coefficients implies that additional BMPs, or BMPs with a greater effectiveness in nitrogen removal, will be required to achieve the NNIP. Even though including uncertainty leads to an increase in BMP implementation rates or BMP effectiveness, this type of analysis provides the decision maker with a more realistic assessment of the likelihood that implementing BMPs as a management strategy will be successful. Monte Carlo simulation results indicate that applying BMPs to new urban developments alone will not be sufficient to achieve the NNIP since BMPs are not 100 percent effective in removing the increase in nitrogen caused by urbanization. BMPs must also be applied to selected existing urban areas. BMPs with a nitrogen removal effectiveness of 40–60 percent, probably the highest level of removal that can be expected over an entire watershed, must be applied to at least 75 percent of the existing urban area to achieve the NNIP This high rate of application is not likely to be achieved in urbanized watersheds in the LIS watershed; therefore, additional point source control will be necessary to achieve the NNIP     

成都大邑县西岭雪山风景名胜区环境美学评价研究

本文根据西岭雪山景区特色，将其分为三大景观区，从景观的美学价值出发，选择了１２个美学评价指标，运用层次分析法和征询评分加权法，对该风景区进行了环境美学综合评价。     

ARCGIS‐SWAT: A GEODATA MODEL AND GIS INTERFACE FOR SWAT1

This paper presents ArcGIS‐SWAT, a geodata model and geographic information system (GIS) interface for the Soil and Water Assessment Tool (SWAT). The ArcGIS‐SWAT data model is a system of geodatabases that store SWAT geographic, numeric, and text input data and results in an organized fashion. Thus, it is proposed that a single and comprehensive geodatabase be used as the repository of a SWAT simulation. The ArcGIS‐SWAT interface uses programming objects that conform to the Component Object Model (COM) design standard, which facilitate the use of functionality of other Windows‐based applications within ArcGIS‐SWAT. In particular, the use of MS Excel and MATLAB functionality for data analysis and visualization of results is demonstrated. Likewise, it is proposed to conduct hydrologic model integration through the sharing of information with a not‐model‐specific hub data model where information common to different models can be stored and from which it can be retrieved. As an example, it is demonstrated how the Hydrologic Modeling System (HMS) ‐ a computer application for flood analysis ‐ can use information originally developed by ArcGIS‐SWAT for SWAT. The application of ArcGIS‐SWAT to the Seco Creek watershed in Texas is presented.     

浅论健美操教学方法

随着人民群众生活水平的不断提高,健美操运动越来越受到广大青少年的喜欢,现已成为各大中专院校的一项重要教学内容,通过多年的教学实践,对当前健美操教学中常用的教学方法进行全面综合、比较与分析,提出8种行之有效的教学方法,以期与各位同仁共同提高健美操教学质量,使健美操这一优秀的健身方法成为全民健身的重要形式和手段。     

ERODIBILITY OF URBAN BEDROCK AND ALLUVIAL CHANNELS,NORTH TEXAS1

ABSTRACT: Major erosion of urban stream channels is found in smaller basins in the North Texas study area with contributing drainage areas of less than ten square miles. Within these basins, four basic channel types are identified based on bed and bank lithologies: alluvial banks and bottoms, alluvial banks and gravel bottoms, alluvial banks with rock bottoms, and rock banks with rock bottoms. Most channels (75 percent) have alluvial banks with gravel or rock bottoms. Channel slopes are steep (.38 to.76 percent). Rock consists predominantly of shale and limestone. Channel cross sections are divided into the following four zones based on weathering, scour and entrainment mechanisms: soil zone, slake zone, rock zone and bed material zone. Erodibility of the channels is determined using multiple techniques including reach hydraulics and stream power computations, submerged jet testing, slab entrainment thresholds, and slake durability rates. Procedures are based on both empirical and modeled time series estimates of channel erosion. Field and modeled results support rates of erosion of up to four inches per year. Rates are tied to flow regime, climate, and type of channel bed and banks.     

An approach to integrate impact scoping with environmental impact assessment

Impact scoping is the process of identifying important issues of a proposal and focusing the environmental impact assessment (EIA) on the high-priority issues. Although impact scoping in one form or another has been inherent to EIA for some time, documentation of its development and discussion of refinements to impact scoping processes have not been forthcoming. This article traces the development of impact scoping through time and highlights the need for such processes in EIA. A focused environmental assessment (FEA) approach to impact scoping that is suitable for implementation in an EIA is presented here and advantages of its use are delineated. FEA is a three-staged process that encourages impact scoping through progressive steps including impact identification, assessment and management planning. FEA combines a suite of EIA methods including: issues matrices, impact hypotheses, valued ecosystem components, and stakeholder participation sessions to effectively integrate impact scoping with EIA.