4种硝酸酯热安定性的绝热试验研究

利用绝热加速量热仪(ARC)对硝酸正丙酯(NPN)、硝酸异丙酯(IPN)、太根(TEGDN)、敌根(DEGDN)4种硝酸酯的热稳定性进行了绝热试验研究,得到绝热放热曲线和热分解特征参数。分析了4种物质分解过程的特点,对测试结果进行了修正。计算得到动力学参数和自加速分解温度SADT,以此作为评估热安定性的判据。结果表明,4种硝酸酯在外界热作用下容易发生分解,反应速度较快,伴随明显的热效应和压力效应。4种硝酸酯的热安定性由好到差排序为:IPN、NPN、TEGDN、DEGDN。     

A new approach to spatial source apportionment of haze pollution in large scale and its application in China

Long-lasting expansion of haze pollution in China has already presented a stern challenge to regional joint prevention and control. There is an urgent need to enlarge and reconstruct the coverage of joint prevention and control of air pollution in key area. Air quality models can identify and quantify the regional contribution of haze pollution and its key components with the help of numerical simulation, but it is difficult to be applied to larger spatial scale due to the complexity of model parameters. The time series analysis can recognize the existence of spatial interaction of haze pollution between cities, but it has not yet been used to further identify the spatial sources of haze pollution in large scale. Using econometric framework of time series analysis, this paper developed a new approach to perform spatial source apportionment. We applied this approach to calculate the contribution from spatial sources of haze pollution in China, using the monitoring data of particulate matter (PM_2.5) across 161 Chinese cities. This approach overcame the limitation of numerical simulation that the model complexity increases at excess with the expansion of sample range, and could effectively deal with severe large-scale haze episodes.     

The inhibitory combustion reaction performance and tail gas analysis of composite ultra-fine dry powder extinguishing agent containing different additives

For lack of an extinguishing agent with high-efficiency, non-toxic and environmentally friendly, a new type of extinguishing agent was fabricated to solve such an urgent problem. In this study, the zinc borate (ZB) and ferrocene (Fe(Cp)₂) were utilized as two additives for extinguishants to suppress combustion reaction and the toxicity of the tail gas was detected. The mass fraction of ZB corresponding to the optimal inhibitory effect was determined to be 0.5–1.5%, by contrast, the optimum interval of Fe(Cp)₂ was detected as 0.5–1.0%. Similarly, with the increasing proportion of the two additives, the homologous inhibitory action was gradually weakened. From the perspective of thermogravimetric analysis (TGA), it was indicated that the ZB accelerated the pyrolysis process of the extinguishant, making its thermal decomposition process more thoroughly. Meanwhile, the differential scanning calorimetry (DSC) demonstrated that the decomposition efficiency was markedly improved when the amount of ZB was maintained at 0.5–1.5%. Besides, the tail gas tests were implemented to assess the extent of toxic and harmful properties. In terms of the carbon monoxide (CO) and carbon dioxide (CO₂) generated, once the mass fraction of ZB and Fe(Cp)₂ was less than 1.5% and 1.0% respectively, the concentration of CO and CO₂ was distinctly lower than that without additives. Moreover, the inhibitory ability on nitrogen oxides (NOx) was enhanced when the mass fraction of the two additives was kept below 1.0%. The results confirmed that a more practical extinguishant was proposed and it can provide guidance for the application and development of extinguishants.     

Thermal decomposition mechanism of 65% lysine sulfate powder and its thermal stability based on thermal analysis

Lysine is widely used in the fields of food, medicine and feed, which generally appears in the form of lysine sulfate or lysine hydrochloride dust because of the high instability of the free L-lysine. The L-lysine Sulfate is in high risk of decomposition, spontaneous ignition and even the dust explosion, because the control temperature in its production process is high up to 90 °C. Thus, the thermal behaviors and its thermal stability of 65% lysine sulfate are experimentally explored in Air and Nitrogen using the simultaneous TG-DSC measurements. Results show: (1) the decomposition of 65% lysine sulfate can be divided into three stages both in the atmospheres of air and nitrogen, and most of the weight loss occurred in the first two stages, which are related with the decarboxylation and deamination process. (2) The effects of atmosphere on the decomposition of 65% lysine sulfate mainly occur at the third stage. In this stage, the weight loss in nitrogen is only 14.2%, which is much lower than that in air (34.3%), which is related to the oxidative degradation at high temperature. Besides, the active energy is slightly increased in nitrogen compared to that in air. (3) The initial temperatures of the decomposition of the 65% lysine sulfate are 145 °C and 155 °C, for the air and nitrogen atmosphere, respectively, which are much lower than that (260 °C) of the pure lysine.     

水稻和玉米的热氧化分解特性及几种动力学方法结果的比较

利用热重分析仪在空气气氛、不同的升温速率下对带壳稻谷粉和玉米粒粉进行了热重测试,依据热重实验数据,采用多种热解动力学分析方法计算了水稻和玉米的活化能数值并进行比较,结果表明水稻和玉米的热氧化反应活化能随着转化率出现先增加后降低的趋势,并在转化率为70%左右达到了极大值。     

五爪金龙凋落叶腐解物的化感潜力研究

采用莴苣种子为受体,测试了五爪金龙凋落叶早期腐解物的化感作用,并与其鲜叶及凋落叶的化感潜力进行了比较分析。结果如下:凋落叶40d的腐解物、鲜叶及凋落叶的水提取液均具有较强的化感潜力,并表现出低促高抑的浓度效应,在FW0.1g﹒mL-1高质量浓度下的综合化感抑制强度为凋落叶未能加土壤的腐解物>鲜叶>凋落叶加土壤的腐解物>凋落叶,而在FW0.005g﹒mL-1低质量浓度下的综合化感促进作用是凋落叶>鲜叶>凋落叶加土壤的腐解物>凋落叶未加土壤的腐解物。鲜叶的抑制强度较凋落叶的大,表明叶片在衰老过程中抑制作用减弱。凋落叶未加土壤仅在空气微生物作用下的腐解物抑制作用最强,促进作用最小,而加入土壤后在土壤微生物作用下的腐解物的抑制作用却有所减弱,抑制强度介于鲜叶和凋落叶的之间,促进作用却小于鲜叶和凋落叶,说明凋落叶腐解过程中微生物的参与对化感作用产生了复杂的影响。     

多氯苯生产中有机氯化物的分析

在气相色谱和色谱-质谱分析的基础上,对以六六六为原料生产多氯苯的两种工艺的产品及废渣进行了分析。结果表明:伴随多氯苯的生成,尚有多种氯化物产生。在水解生产工艺中,产品和废渣中有微量PCDDs和PCDFs,但产品中还有少量PCBs。在热解工艺中,废渣内发现大量的PCBs,PCDDs和PCDFs,最毒的异构体,2,3,7,8-TCDD含量高达24ppm。     

不同有机物料在潮棕壤中有机碳分解进程

用尼龙网袋法研究了特定年度中，不同月份间有机物料在潮棕壤旱田、水田中有机碳分解速率及C／N变化。结果表明，4种物料(玉米秸和玉米根，水稻秸和水稻根)在潮棕壤地区温度、湿度适宜的前3个月(1999年7—月)迅速分解，之后进入缓慢分解阶段，其中根的分解残留率始终高于秸秆。经计算约有2／3的玉米根和稻根腐解产物残留在土壤里；分解至试验结束。所有物料的C/N比都趋于一致，约在10—13之间，与土壤腐殖质的洲比非常相近，说明这些物料已基本完成其腐殖化过程，而成为较稳定的有机组分、这对增加土壤有机质、培肥土壤非常重要。     

利用逆向轨迹反演模式估算北京地区甲烷源强

利用连续监测的大气甲烷浓度数据和拉格朗日逆向轨迹反演模式估算出北京甲烷源排放强度，并与根据最新调查数据建立的北京地区甲烷源排放清单进行了比较。排放清单结果表明，北京地区甲烷排放总量为296．4Gg/a，其中，最主要的甲烷排放源为城市垃圾和化石燃料，反映了北京作为一特大城市甲烷排放以人为源为主的特点。利用2000年6月至12月连续观测的有湿合层代表性的北京大气甲烷浓度，通过奇异值分解法（Singular Value Decomposition，SVD）反演出模拟区域的甲烷排放源强度和分布。模式计算与排放清单在甲烷源定性分布上对应较好，定量结果也是合理的。但由于可输入的气象数据有限，轨迹在整个模拟区域内覆盖不均匀，反演出的源块位置有偏差，其中偏差最大的为煤矿的甲烷排放。