Mo-modified Pd/Al2O3 catalysts for benzene catalytic combustion

Mo-modified Pd/Al2O3catalysts were prepared by an impregnation method and tested for the catalytic combustion of benzene. The catalysts were characterized by N2 isothermal adsorption, X-ray diffraction（XRD）, X-ray photoelectron spectroscopy（XPS）, temperatureprogrammed desorption of NH3（NH3-TPD）, H2temperature-programmed reduction（H2-TPR）, and high-angle annular dark-field scanning transmission electron microscopy（HAADF-STEM）. The results showed that the addition of Mo effectively improved the activity and stability of the Pd/Al2O3catalyst by increasing the dispersion of Pd active components, changing the partial oxidation state of palladium and increasing the oxygen species concentration on the surface of catalyst. In the case of the Pd-Mo/Al2O3catalyst,benzene conversion of 90% was obtained at temperatures as low as 190°C, which was 45°C lower than that for similar performance with the Pd/Al2O3catalyst. Moreover, the 1.0% Pd-5% Mo/Al2O3catalyst was more active than the 2.0% Pd/Al2O3catalyst. It was concluded that Pd and Mo have a synergistic effect in benzene catalytic combustion.     

Pd/activated carbon sorbents for mid-temperature capture of mercury from coal-derived fuel gas

Higher concentrations of Hg can be emitted from coal pyrolysis or gasification than from coal combustion, especially elemental Hg. Highly efficient Hg removal technology from coal-derived fuel gas is thus of great importance. Based on the very excellent Hg removal ability of Pd and the high adsorption abilities of activated carbon（AC） for H2 S and Hg, a series of Pd/AC sorbents was prepared by using pore volume impregnation, and their performance in capturing Hg and H2 S from coal-derived fuel gas was investigated using a laboratory-scale fixed-bed reactor. The effects of loading amount, reaction temperature and reaction atmosphere on Hg removal from coal-derived fuel gas were studied. The sorbents were characterized by N2 adsorption, X-ray diffraction（XRD） and X-ray photoelectron spectroscopy（XPS）. The results indicated that the efficiency of Hg removal increased with the increasing of Pd loading amount, but the effective utilization rate of the active component Pd decreased significantly at the same time. High temperature had a negative influence on the Hg removal. The efficiency of Hg removal in the N2-H2S-H2-CO-Hg atmosphere（simulated coal gas） was higher than that in N2-H2S-Hg and N2-Hg atmospheres, which showed that H2 and CO, with their reducing capacity, could benefit promote the removal of Hg. The XPS results suggested that there were two different ways of capturing Hg over sorbents in N2-H2S-Hg and N2-Hg atmospheres.     

南京一次大雾过程边界层特征分析

雾、霾影响空气质量,特定气象条件有利于雾、霾形成。利用南京大学仙林综合观测基地的近地层湍流资料以及MICAPS气象资料,分析了2011年11月18日南京一次大雾过程的边界层特征。结果表明,大雾发生前后南京处于高空低压槽前,西南暖湿气流向南京地区输送充足的水汽,而近地面主要受到低压倒槽的控制,使得近地层相对湿度一直在90%以上。边界层上空(约300~500 m)存在很强很厚的逆温层,近地层动量通量几乎为0,感热通量也几乎为0,表明大雾期间南京地区大气一直处于稳定的边界层中,近地层湍流很微弱,有利于大雾的形成和维持。能谱分析表明,能谱高频段满足-2/3率,但中低频率部分可能由于非均匀下垫面地形的影响,分布比较杂乱。     

地面伽马能谱测量在铀矿找矿中的应用

应用伽马能谱测量在小灶火地区进行铀矿勘探,在全面收集区内已有资料的基础上,开展了1/1万地面伽马能谱测量、1/1万地面伽马能谱剖面测量及1/2千地面伽马能谱剖面测量,通过本次工作大致查明了区内各种地质体的放射性特征,大致查明了区内各种地质体的铀含量及矿(化)体的分布情况,对圈定的矿化蚀变带、矿(化)体走向上进行揭露、控制,并探索其在倾向上的延深情况。对矿床的成因、控矿因素、成矿规律进行了初步研究[1]。     

利用SEM-EDS分析火场中白炽灯灯丝通电状态

该文模拟火灾现场中白炽灯破坏的不同情况,制备普通白炽灯在不同状态下破坏的灯丝残骸试样,利用扫描电子显微镜-X射线能谱仪分析灯丝残骸表面的微观形貌及其元素组成含量.研究发现,通电状态下被破坏的白炽灯灯丝表面与未通电破坏状态下灯丝表面的元素成分差异较大.经过高温或烟熏的作用,灯丝表面成分也有变化.鉴于不同破坏条件下灯丝表面成分及含量存在明显的差异,可以利用能谱分析的方法判断火场中白炽灯的通电状态.     

金属软管爆裂失效分析

某厂压缩机出口管线处金属软管的设计压力为6.3 MPa,试压时金属软管接头与接头套处发生爆裂,爆裂压力为4.2 MPa。通过对金属软管爆裂处进行宏观检查与测厚、化学成分分析、断口分析、X射线能谱分析以及焊接形式分析,判定金属软管爆裂的主要原因是活套法兰侧接头与波纹管连接焊缝结构不合理导致焊缝承载能力不足,焊缝存在严重未焊透、焊材选用不合理,进一步导致了焊缝承载能力的下降。最后,提出了针对性预防措施。     

水泥基固化多环芳烃的性能研究

水泥基对多环芳烃污染土壤进行固化稳定化处理,利用扫描电镜(SEM),能谱分析(EDX)和X射线衍射(XRD)三种方法,结合固化体性能表征因子非侧限抗压强度(UCS)和浸出毒性(TCLP),来说明固化体的微观结构与性能之间的关系,从而对固化的机理进行阐释。     

掺钴水钠锰矿对铅的吸附及对砷的氧化

为了研究过渡金属离子掺杂对锰氧化物作为环境友好材料物理化学性质的影响,在浓盐酸还原高锰酸钾制备水钠锰矿过程中添加氯化钴,在常压回流条件下一步合成了三维纳米微球状水钠锰矿,考察了其铅吸附和砷氧化能力.应用粉晶X射线衍射、化学分析、N2物理吸附、场发射扫描电镜（FE-SEM）、X射线光电子能谱（XPS）等手段表征产物晶体结...     

Vishay推出新款850nm红外发射器

正日前,Vishay Intertechnology,Inc.(NYSE股市代号:VSH)宣布,发布采用小尺寸3.85mm x3.85mm x 2.24mm顶视SMD封装的新款850nm红外发射器---VSMY98545,扩大其光电子产品组合。VSMY98545基于SurfLight?表面发射器芯片技术,集成镜片,具有高驱动电流、高发光强度和高光功率,同时具有低热阻。VSMY98545使用42milx 42mil发射器芯片,结到管脚的热阻为10K/W,驱动电流高达1A,脉冲电流可达     

典型电解锌冶炼废渣重金属形态及环境效应研究

电解锌冶炼废渣收集、转移、贮存与利用处置过程的环境管理是困扰铅锌冶炼行业的瓶颈问题之一.对典型电解锌冶炼各工艺段废渣及原矿中的重金属组成与赋存形态进行了研究,并在此基础上研究了废渣的环境效应和生物有效性.结果表明,典型电解锌冶炼原矿中存在高含量的Zn、Pb等重金属元素,各工艺段废渣中Zn、Pb、Cd和M n等元素含量较...