Euglena gracilis as a model for the study of Cu and Zn toxicity and accumulation in eukaryotic cells

We have observed the effect of copper and zinc on the biology of Euglena gracilis. The cells displayed different sensitivities to these metals, as the apparent LC₅₀ for Cu²⁺ was 0.22 mM, and for Zn²⁺ it was 0.88 mM. While Zn²⁺ was able to increase cell proliferation even at 0.1 mM, the minimal CuCl₂ concentration tested (0.02 mM) was sufficient to impair cell division. Higher concentrations of these metals not only inhibited cell division in a concentration-dependent manner, but also interfered with the metabolism of E. gracilis. A higher accumulation of proteins and lipids per cell was observed at the DI₅₀ concentration for metal-treated cells. These results suggest that the test concentration of both metals leads to a failure in completing cell division. Ultrastructural analysis indicated a chloroplast disorganization in copper-treated cells, as well as the presence of electron dense granules with different shapes and sizes inside vacuoles. Microanalysis of these granules indicated an accumulation of copper, thus suggesting a detoxification role played by the vacuoles. These results indicate that E. gracilis is an efficient biological model for the study of metal poisoning in eukaryotic cells. They also indicate that copper and zinc (copper being more poisonous) had an overall toxic effect on E. gracilis and that part of the effect can be ascribed to defects in the structure of chloroplast membranes.     

Two-site kinetic modeling of bacteriophages transport through columns of saturated dune sand

Breakthrough curves, on a semi-log scale, from tests in porous media with block-input of viruses, bacteria, protozoa and colloidal particles often exhibit a typical skewness: a rather slowly rising limb and a smooth transition of a declining limb to a very long tail. One-site kinetic models fail to fit the rising and declining limbs together with the tail satisfactorily. Inclusion of an equilibrium adsorption site does not seem to improve simulation results. This was encountered in the simulation of breakthrough curves from a recent field study on the removal of bacteriophages MS2 and PRD1 by passage through dune sand. In the present study, results of laboratory experiments for the study of this issue are presented. Breakthrough curves of salt and bacteriophages MS2, PRDI, and phiX174 in 1 D column experiments have been measured. One- and two-site kinetic models have been applied to fit and predict breakthrough curves from column experiments. The two-site model fitted all breakthrough curves very satisfactorily, accounting for the skewness of the rising limb as well as for the smooth transition of the declining limb to the tail of the breakthrough curve. The one-site model does not follow the curvature of the breakthrough tail, leading to an overestimation of the inactivation rate coefficient for attached viruses. Interaction with kinetic site 1 is characterized by relatively fast attachment and slow detachment, whereas attachment to and detachment from kinetic site 2 is fast. Inactivation of viruses and interaction with kinetic site 2 provide only a minor contribution to removal. Virus removal is mainly determined by the attachment to site 1. Bacteriophage phiX174 attached more than MS2 and PRD1, which can be explained by the greater electrostatic repulsion that MS2 and PRD1 experience compared to the less negatively charged phiX174.     

生物膜填料塔SO2废气净化性能研究

采用生物膜填料塔净化SO2废气,研究结果表明:当气体流量从100L/h增加到300L/h时,SO2净化效率由86.4%下降到73.2%;生化去除量随着入口SO2气体浓度的升高而增大;随着温度的升高,SO2净化效率和生化去除量都随之提高,且20℃以上时,净化效率可达90.9%以上,生化去除量可达75 mg/L·h以上,更利于微生物降解SO2.     

Particle emissions of a railway line determined by detailed single particle analysis

The goal of this study was to identify and quantify particles emitted from railway traffic. For that purpose PM10 samples were collected near a busy railway line using a wind direction and speed controlled sampling equipment consisting of five devices. Measurements taken perpendicular to the railway lines at 10, 36 and 120 m distance enable an identification and separation of particles caused by the railway traffic from background particles. Morphology and chemistry of more than 11,000 particles were analysed by computer controlled scanning electron microscopy (CCSEM). Based on chemical composition five particle classes are defined and assigned to their sources. The mass of the individual particles is determined by multiplying their volumes, calculated based on their morphology with a density assigned specifically to each particle class. The density of the particle classes is derived from their chemical composition. To estimate the PM10 contributions of the railway lines, the mass of PM10 at 120 m (background, not influenced by the railway lines) is subtracted from the mass of PM10 at 10 m. The emissions of the railway lines are dominated by ‘iron’ particles, which contribute 2.9 μg m⁻³ or 67% to the railway related PM10. In addition, ‘aluminium’ and ‘calcium’ particles contribute also to the railway related PM10 (1.0 μg m⁻³ or 23% for the ‘aluminium’ and 0.4 μg m⁻³ or 10% for the ‘calcium’ particles). These particles are assigned to abrasion of the gravel bed and re-suspension of mineral dust.Long-term gravimetric results of the contribution of iron to the mass of railway related PM10 from a study performed earlier at the same site are in good agreement with the data presented in this study.     

附载型复合光催化剂TiO2·SiO2/beads降解有机磷农药

研究以四异丙醇钛 [Ti( iso- O C3 H7) 4]、硅酸乙酯为原料 ,以空心玻璃微球为载体 ,用溶胶—凝胶法制备可漂浮附载型复合光催化剂 Ti O2 · Si O2 / beads的过程 ,利用附载型复合光催化剂降解有机磷农药。结果表明 ,复合型光催化剂 Ti O2 · Si O2 摩尔比存在最佳值 ,n ( Ti O2 ) / m ( Si O2 ) =30 / 70时 ,光催化剂活性最高 ,其活性是同样降解条件下、同样含量 Degussa P- 2 5Ti O2 的 2倍左右。该光催化剂比表面大 ,吸附性强。并用 XRD和 SEM对附载型复合光催化剂进行表征     

Untersuchungskonzept zur Charakterisierung toxischer Stoffe in belastetem Wasser

Zusammenfassung  Zur ?kotoxikologischen Beurteilung von belastetem Wasser werden h?ufig einfache Biotests eingesetzt. Nicht selten werden dabei toxische Effekte festgestellt. Es stellt sich dann die Frage nach den verantwortlichen Wasserinhalts-stoffen. Durch Festphasenextraktion (SPE) werden diese angereichert, gewonnen und dünnschichtchromatographisch unter Verwendung der automatisierten Mehrfachentwicklung aufgetrennt. Von der DC-Platte wird ein Streifen abgetrennt und darauf direkt die biologische Detektion mit Mikroorganismen (Bacillus subtilis, Leuchtbakterien) durchgeführt. Dadurch k?nnen toxische Banden erkannt werden, Auf dem DC-Plattenrest wird von der toxischen Bande mit einem DC-scanner ein UV-Spektrum aufgenommen, die entsprechende Bande herausgekratzt, der toxische Stoff eluiert und infrarotspektroskopisch untersucht. Durch Spektrenvergleich gelingt es meistens, den Stoff zu charakterisieren. In der vorliegenden Arbeit wird am Beispiel eines Zitzengummieluates das Analysenkonzept vorgestelit. Es zeigte sich, dass dieser Gummiartikel einen Vulkanisationsbeschleuniger (2-Mercaptobenzothiazol) freisetzt. Online-Publikation am: 21.12.1999     

Formation of polychlorobiphenyls in silicone rubber

In silicone rubber crosslinked with bis(2,4-dichlorobenzoyl) peroxide (DCBP) as initiator about 0.1% of DCBP is converted into polychlorobiphenyls (PCBs). The PCB content in silicone rubber determined by high resolution gas chromatography (HRGC) after its destruction by HF is around 10 mg/kg. 29 PCB congeners were detected. Instead of the expected PCB-47, lower chlorinated congeners are predominant. Some possible pathways of their origin are presented.     

Chemische Reaktionen von chlorvinylarsinverbindungen (Lewisite)

Zusammenfassung  2-Chlorvinylarsindichlorid (Lewisit I) und 2,2′-Dichlordivinylarsinchlorid (Lewisit II) reagieren bei Raumtemperatur in einer Substitutionsreaktion schnell und quantitativ mit Dithiolen. Die Derivate wurden massenspetrometrisch identifiziert. Sie sind mit GC/ECD detektierbar. Diese Reaktionen k?nnen zur gaschromatographischen Bestimmung von Lewisiten in Wasser-und Bodenproben eingesetzt werden.      

L-半胱氨酸改性甲壳素处理含铅、镉工业废水

研究了L 半胱氨酸改性甲壳素作为吸附剂对Pb2 + 、Cd2 + 的动态吸附性能 ,同时考察了流速、溶液中离子的含量、吸附剂的相对用量等因素对吸附效果的影响 ,以及洗脱液的种类和酸度、洗脱速度、洗脱液体积等因素对解吸率的影响。结果表明 ,用该吸附剂填装的吸附柱对含Pb2 + 、Cd2 + 工业废水直接进行处理 ,处理后的水达到了排放标准。     

PM10冲击采样器切割头设计参数对切割粒径的影响

本文从颗粒在气流中的受力情况分析入手 ,得到冲击采样器中喷嘴喷出后颗粒的运动轨迹方程以及运动轨迹与采样器切割头设计参数的关系式。分析了PM10空气采样器的切割原理 ,并利用数值计算研究颗粒在不同的流量、喷嘴尺寸及喷嘴与冲击板的距离下的运动轨迹 ,从而得到切割头设计参数对切割粒径的影响