农田灰钙土中有机质和碳酸钙对Zn吸附-解吸行为的影响

采用序批平衡法,研究了Zn在去除有机质及去除碳酸钙前后灰钙土的吸附-解吸行为.结果表明,在试验土壤中吸附量均随着加入Zn浓度的增加而增加,且去碳酸钙土对Zn吸附固定能力明显低于灰钙土,即有机质对灰钙土Zn的吸附影响小于碳酸钙;去有机质及去碳酸钙前后灰钙土对Zn的吸附过程不适合用 Langmuir方程描述,而 Freundlich方程能够很好地拟合,调整后的决定系数R2￠均大于0.90,达到极显著水平(P<0.01);去除有机质和碳酸钙后灰钙土对Zn的解吸率都升高,且灰钙土去碳酸钙后解吸率略高于去有机质;去除有机质及碳酸钙前后灰钙土的解吸量均随吸附量的升高而升高,且去碳酸钙土解吸量最大,去有机质土次之,灰钙土最小;土壤有机质和碳酸钙对Zn均有较强的络合吸附效应,能有效降低Zn的迁移活性,从而促进吸附,抑制解吸.     

树脂基纳米零价铁复合材料的制备及其去除重金属铅Pb(Ⅱ)的性能研究

凭借着优越的还原活性,纳米零价铁在环境污染治理和修复领域应用广泛。通过将纳米零价铁(n ZVI)颗粒负载到大孔阴离子和阳离子交换树脂上,成功制备出2种树脂基纳米零价铁复合材料。研究了2种复合材料及其载体对水溶液中Pb(Ⅱ)的去除性能,考察了不同载体功能基团对复合材料去除Pb(Ⅱ)性能的影响。结果表明:以大孔阴离子交换树脂为载体的D001-Fe0复合材料因具有离子交换和化学还原双重作用,对Pb(Ⅱ)的去除效率高、速率快。     

活性炭对非离子型表面活性剂中菲的吸附效能

为研究表面活性物质与疏水有机物的分离效能,以TX100(曲拉通100)为代表性的非离子型表面活性剂,以PHE(菲)为代表性的多环芳烃,使用活性炭对二者共存体系进行静态吸附和固定床吸附. 静态吸附结果表明,活性炭对TX100和PHE的吸附均满足Langmuir等温吸附模型和准二阶动力学模型,吸附量分别为437.31和58.86 mg/g. 固定床吸附时,对应于14.7 cm的活性炭柱高,PHE穿透10%和TX100穿透90%的时间分别是420和270 min,从BDST(bed depth service time)模型中可以得到TX100传质区长度小于PHE,这为二者分离提供了条件. 通过活性炭固定床吸附可以在回收90%TX100的同时去除90%PHE,说明吸附法是一种回收表面活性剂的有效方法. 利用微波法再生活性炭,可使购置活性炭的成本降低4/5,进一步提高了回收法的经济性和可行性. 研究表明,活性炭吸附是一种可用于土壤洗涤工艺中回收表面活性剂的有效方法.      

Nexus between polymer support and metal oxide nanoparticles in hybrid nanosorbent materials (HNMs) for sorption/desorption of target ligands

Metal oxide nanoparticles like hydrated ferric oxide (HFO) or hydrated zirconium oxide (HZrO) are excellent sorbents for environmentally significant ligands like phosphate, arsenic, or fluoride, present at trace concentrations. Since the sorption capacity is surface dependent for HFO and HZrO, nanoscale sizes offer significant enhancement in performance. However, due to their miniscule sizes, low attrition resistance, and poor durability they are unable to be used in typical plug-flow column setups. Meanwhile ion exchange resins, which have no specific affinity toward anionic ligands, are durable and chemically stable. By impregnating metal oxide nanoparticles inside a polymer support, with or without functional groups, a hybrid nanosorbent material (HNM) can be prepared. A HNM is durable, mechanically strong, and chemically stable. The functional groups of the polymeric support will affect the overall removal efficiency of the ligands exerted by the Donnan Membrane Effect. For example, the removal of arsenic by HFO or the removal of fluoride by HZrO is enhanced by using anion exchange resins. The HNM can be precisely tuned to remove one type of contaminant over another type. Also, the physical morphology of the support material, spherical bead versus ion exchange fiber, has a significant effect on kinetics of sorption and desorption. HNMs also possess dual sorption sites and are capable of removing multiple contaminants, namely, arsenate and perchlorate, concurrently.     

Comparison of the removal of monovalent and divalent cations in the microbial desalination cell

Microbial desalination cell (MDC) is a promising technology to desalinate water and generate electrical power simultaneously. The objectives of this study were to investigate the desalination performance of monovalent and divalent cations in the MDC, and discuss the effect of ion characteristics, ion concentrations, and electrical characteristics. Mixed salt solutions of NaCl, MgCl₂, KCl, and CaCl₂ with the same concentration were used in the desalination chamber to study removal of cations. Results showed that in the mixed salt solutions, the electrodialysis desalination rates of cations were: Ca²⁺ >Mg²⁺>Na⁺>K⁺. Higher ionic charges and smaller hydrated ionic radii resulted in higher desalination rates of the cations, in which the ionic charge was more important than the hydrated ionic radius. Mixed solutions of NaCl and MgCl₂ with different concentrations were used in the desalination chamber to study the effect of ion concentrations. Results showed that when ion concentrations of Na⁺ were one-fifth to five times of Mg²⁺, ion concentration influenced the dialysis more profoundly than electrodialysis. With the current densities below a certain value, charge transfer efficiencies became very low and the dialysis was the main process responsible for the desalination. And the phosphate transfer from the anode chamber and potassium transfer from the cathode chamber could balance 1%–3% of the charge transfer in the MDC.     

几种氨氮吸附剂的对比实验研究

为给人工快速渗滤系统提供可行的填料,研究了煅烧贝壳、沸石、麦饭石、蛭石、中砂和细砂对氨氮的吸附效果。实验采用100 mg／L的氯化铵溶液作为初始溶液,结果表明,6种填料均具有快速吸附,缓慢平衡的吸附特点。经过11 h的吸附,煅烧后的贝壳对于氨氮的吸附量为0．993 mg／g。各个氨氮初始浓度梯次下,沸石的最大吸附量均超过其它5种填料,具有明显的氨氮吸附效果。     

秋季南通近海大气气溶胶水溶性离子粒径分布特征

2012年10~11月在南通近海设立观测点,利用Anderson分级采样器采集大气气溶胶样品,用离子色谱仪(Metrohm IC)分析其中10种水溶性离子组成.结果表明,南通秋季近海PM10和PM2.1中水溶性离子浓度分别为59.70,45.96mg/m3.PM2.1中主要离子质量浓度排列依次为SO42->NO3->NH4+>Ca2+. SO42-,NO3-和NH4+占PM10中离子浓度的80%以上,二次离子为近海区域气溶胶的主要成分.SO42,NH4+和NO3-均表现出单峰型分布,峰值区间均为0.43~1.1mm,Ca2+,Na+和Cl-表现为双峰型.Ca2+高浓度峰值出现4.7~5.8mm粒径段内;Na+和Cl-峰值出现在0.43~1.1mm和3.3~5.8mm内,但最大峰值浓度区间不一致.PM10中nss-SO42-/SO42-比值均高于90%,陆地源对近海硫酸盐的影响显著.nss-SO42-/NO3-的比值在<2.1μm的粒径段内均大于1,表明该区域固定源是大气细粒子中离子的重要贡献源,但移动源对粗粒子的影响值得重视.个例分析显示,稳定的天气系统,高污染排放内陆地区的污染物传输,是造成10月27日的严重污染过程的主要原因.     

坡缕石黏土污泥对水相中亚甲基蓝吸附研究

利用坡缕石黏土污泥(从木质素磺酸钠废水中得到)和酸化的坡缕石黏土(1mol/L盐酸)作为吸附剂对水相中的亚甲基蓝进行吸附研究,并利用透射电镜(TEM)、红外光谱(FT-IR)、X-射线衍射(XRD)及Zeta电位分析对两种吸附剂的结构及表面电性进行了表征.结果表明:当吸附剂用量为10mg,温度为30℃时,1mol/L盐酸酸化的坡缕石黏土最大吸附量为97.50mg/g,坡缕石黏土污泥最大吸附量为98.7mg/g.选取坡缕石黏土污泥作为最佳吸附剂,对污泥吸附亚甲基蓝的吸附等温线、吸附热力学及吸附动力学模型进行了研究,结果显示:此吸附过程为自发吸热过程,吸附等温线更符合Langmuir模型,吸附动力学符合准二级动力学模型.     

脱硫石膏基羟基磷灰石对Cu2+吸附性能的研究

以燃煤电厂废弃物脱硫石膏(FGD)为主要原料,利用水热合成法制备羟基磷灰石(FGD-HA),利用XRD和SEM对FGD-HA的物相组成和微观形貌进行了分析和观察.通过静态吸附实验研究了吸附动力学、吸附等温线以及吸附热力学.结果表明,伪二级动力学模型相关系数为0.9998,是描述FGD-HA吸附Cu2+的最佳动力学模型,Cu2+在FGD-HA上的吸附平衡符合Langmuir等温线模型(R2=0.9846),热力学表明此吸附是自发吸热的过程.利用响应面分析法对Cu2+的吸附条件进行优化,得出投加量3.11g/L、pH值4.96、温度22.09℃、Cu2+初始浓度24.75mg/L为最佳吸附条件,此条件下Cu2+去除率预测值为100%,相同条件下开展的验证实验结果为97.4%,与预测值相接近说明模型的选择是实际可行的.     

胺型腰果酚醛树脂对Ag~+的吸附

制备了3种胺型腰果酚醛树脂(二乙撑三胺型腰果酚醛树脂(PCD)、己二胺型腰果酚醛树脂(PCE)、己二胺型腰果酚醛树脂(PCH)),采用XPS(X-射线光电子能谱仪)、EA(元素分析仪)、FTIR(傅利叶变换红外光谱分析仪)等手段研究了其结构特征,并考察了其对水溶液中Ag+的吸附行为和机理.结果表明,3种树脂对Ag+有较高的吸附量和吸附作用;在pH值为5.5的条件下,树脂对Ag+的吸附效果最佳;2h内吸附达到平衡;吸附行为均符合Lagergren准二级速率方程;树脂对Ag+的吸附均符合Langmuir等温吸附方程;吸附反应为自发吸热和熵增的过程;可溶性无机盐对树脂吸附Ag+的影响不大;推测其吸附机理是树脂上胺基、羟基与Ag+发生较强的配位作用和较弱的离子交换作用的化学吸附为主.吸附Ag+后的树脂可用硝酸脱附再生;树脂循环使用4次后,吸附率和脱附率仍大于90%.