改良UCT分段进水工艺处理生活污水性能优化研究

在某大型污水处理厂采用中试规模的改良UCT分段进水脱氮除磷工艺处理低COD/N生活污水,重点研究了流量分配比和原水营养元素比（COD/N、COD/P和TN/P）对工艺脱氮除磷性能的影响,目的是分析探索工艺对有机物和氮磷去除机制和污泥特性.连续运行试验表明,该工艺取得稳定高效的去除性能.在进水COD负荷为0.79～0.9...     

苯硝化工艺HAZOP分析的定量化研究

为提高危险化工工艺过程风险评估的准确性,通过工艺仿真模拟,研究工艺参数波动对生产装置安全性能的影响。以苯硝化工艺为例,采用危险与可操作性分析对该过程进行定性的风险评估;同时利用Aspen Plus建立苯硝化装置的模拟流程。结合HAZOP分析中偏差与模拟中硝化釜的流程变量之间的联系,以进料混酸的流量和1号硝化釜热负荷及出口温度为量化指标,观察混酸流量在正常操作点17.6 m3/h的±100%范围波动下1号硝化釜热负荷及出口温度的变化。研究结果表明,保持1号硝化釜温度为正常值,随着混酸流量的增大,硝化釜热负荷先增大后减小;保持硝化釜热负荷不变,随着混酸流量的增大,硝化釜温度先增大后减小。其中混酸流量值超过22.95 m3/h时,温度超过报警阈值60℃。     

Effects of operational factors on soluble microbial products in a carrier anaerobic ba ed reactor treating dilute wastewater

The effects of feed strength, hydraulic residence time （HRT）, and operational temperatures on soluble microbial product （SMP） production were investigated, to gain insights into the production mechanism. A carrier anaerobic baffled reactor （CABR） treating dilute wastewater was operated under a wide range of operational conditions, namely, feed strengths of 300-600 mg/L, HRTs of 9- 18 h, and temperatures of 10-28℃. Generally, SMP production increased with increasing feed strength and decreasing temperature. At high temperature （28℃）, SMP production increased with decreasing HRT. As the temperature was decreased to 18 and 10℃, the SMP production was at its peak for 12 h HRT. Therefore, temperature could be an important determinant of SMP production along with HRT. A higher SMP to soluble chemical oxygen demand （SCOD） ratio was found at high temperature and long HRT because of complete volatile fatty acid degradation. SMP accounted for 50%-75% of the SCOD in the last chamber of the CABR. As a secondary metabolite, some SMP could be consumed at lower feed strength.