双酚A和邻苯二甲酸二正丁酯在纸类上的吸附特性研究

采用序批式实验,考察了报纸对双酚A(BPA)和邻苯二甲酸二正丁酯(DnBP)的吸附能力,用Freundlich、Langmuir、Dubinin-Radushkevich(D-R)、Flory-Huggins(F-H)、BET、Temkin 6种吸附等温线模型对实验数据进行了拟合.并选择了回归系数(R2)、均方根差(RMSE)和卡方检验(X2检验)3种非线性回归方法评价了模型拟合度.结果表明,Freundlich和Temkin吸附等温线模型能很好地描述BPA和DnBP在纸类表面的吸附,BPA和DnBP的R2均大于0.95(P<0.01),RMSE和X2分别小于0.05和0.02;吸附能力与吸附质的疏水性呈正相关.由D-R和F-H吸附等温线模型拟合结果可知,BPA和DnBP的吸附平均自由能分别为1.484和1.609 kJ/mol;Gibbs自由能分别为-6.559和-7.021 kJ/mol.说明BPA和DnBP在纸类上的吸附为自发的物理吸附.BPA和DnBP在纸类上的Freundlich吸附常数k分别为0.147和0.502 mg(1-n)·L"·g-1,均高于文献报道的底泥等的吸附常数,说明生活垃圾填埋场中纸类会阻碍BPA和DnBP的迁移和生物可利用性.     

改性龙须眼子菜吸附水溶液中Cu2+的性能

采用批式实验法对改性龙须眼子菜吸附溶液中Cu2+的吸附动力学过程及吸附平衡进行了研究,考察了溶液初始pH值、吸附剂用量、温度等对改性龙须眼子莱吸附Cu2+的影响.结果表明,吸附动力学过程可以用准二级动力学方程进行拟合,吸附等温线符合Langmuir模型而不符合Freundlich模型.吸附实验的优化条件为:溶液初始pH值为4.0～5.6,溶液初始Cu2+浓度与吸附剂用量比值为10～25 mg·g-1,吸附时间为30～45 min,吸附温度为20-30℃.龙须眼子菜经甲醇改性后对Cu2+的吸附性能有了很大程度的提高;在改性龙须眼子菜吸附Cu2+的过程中,存在离子交换作用,但不占主导地位;改性龙须眼子菜吸附Cu2+主要依靠醇、酚类中的O-H基团,酰胺类中的C=O、N-H与C-N基团,砜类中的S=O基团与Cu2+的配位作用.     

给水厂铝污泥特性分析及吸附氮磷性能试验

对典型给水厂铝污泥的元素组成及含量、比表面积和孔径结构、结构基团等特性进行了系统分析。利用静态试验对其吸附水溶液中氨氮和磷酸盐的性能进行考察,确定了其吸附等温线、吸附速率模型及参数。分析表明:铝污泥中铝、铁、硅等元素含量较多,污泥本身以无定形的非晶体物质为主,具有较大的比表面积和发达的孔隙结构,孔径处于介孔范围,红外光谱分析表明铝污泥中含有大量的铝羟基络合物(Al—OH)和Si—O—Si键。铝污泥对磷和氨氮的吸附等温线可分别用Langmuir和Freundlich等温式描述,吸附动力学符合拟二级动力学模型,铝污泥对氨氮的吸附存在快速吸附后并解吸至稳定的现象。     

1,3,5-triazine-triethylenetetramine polymer: an efficient adsorbent for removal of Cr(VI) ions from aqueous solution

The synthesis of 1,3,5-triazine-triethylenetetramine (TATETA), its characterization by infrared spectroscopy and elemental analysis, and its application for removal of Cr(VI) ions from aqueous solution is reported. The effects of pH, contact time, initial concentration of Cr(VI), sorbent dose, and temperature on adsorption were investigated and optimized by batch adsorption experiments. Adsorption was highest at acidic conditions with an equilibration time of 25 min. The adsorption followed a Langmuir model, with an adsorption capacity of 303 mg g^?1, was second order in its kinetics, and exothermic and thus spontaneous.     

Removal of congo red and basic violet 1 by chir pine (Pinus roxburghii) sawdust,a saw mill waste: batch and column studies

The efficiency of chir pine sawdust (CPS) for adsorptive removal of the dyes, congo red (CR) and basic violet 1 (BV), from aqueous solution was evaluated using batch and column studies. The equilibrium was attained in 60 min for CR and 45 min for BV. The adsorption of BV obeyed the Langmuir isotherm model while the Freundlich isotherm fitted the equilibrium data of CR adsorption. The Langmuir monolayer adsorption capacities (Q_o) of CPS for BV and CR were 11.3 and 5.8 g kg^?1, respectively. The kinetic data for CR were best fitted to the Lagergren pseudo-first-order model and for BV to the pseudo-second-order model. The intra-particle diffusion was found to be the rate-controlling step for CR adsorption, while the adsorption kinetics of BV were controlled by both intra-particle and liquid-film diffusion. The thermodynamic parameters indicated that the adsorption process was spontaneous and endothermic in nature. The adsorption activation energy (E_a) for CR (124 kJ mol^?1) implied chemical adsorption while that for BV (5.4 kJ mol^?1) indicated physical adsorption. An increase in the Thomas model constant (K_Th) with increasing flow indicated that for both dyes the mass transport resistance decreased during adsorption. Thus, CPS may be an efficient low-cost adsorbent for decolorization of dye-containing wastewaters.     

Heavy metals uptake from aqueous solutions using marine algae (Colpomenia sinuosa): kinetics and isotherms

The adsorption of copper, zinc, cobalt, lead and cadmium ions onto Colpomenia sinuosa was studied as a function of contact time, initial metal ion concentration and initial pH. In addition, desorption studies were performed. Characterisation of this adsorbent was also confirmed by Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM) analysis. Batch adsorption experimental data were analysed using Langmuir, Freundlich and Dubinin–Raduschkevich (D–R) adsorption isotherms. The results indicated that the biosorption equilibrium was well described by both the Freudlich and D–R isotherms. Moreover, sorption kinetics was performed and it was observed that equilibrium was reached in<60 min, which could be described by the pseudo-second-order kinetic model for all heavy metals. The sorption of heavy metals onto the biomass was largely dependent on the initial solution pH. The elution efficiency for heavy metal ions desorption from C. sinuosa was determined for 0.1 M HCl, 1.0 M HCl and 1.0 M HNO₃. Desorption efficiency and also adsorption capacity were highest for Pb(II). The results indicate that C. sinuosa has great potential for the removal of heavy metals in an ecofriendly process.     

土壤对铜和镉的静态吸附研究

通过静态吸附实验研究了德兴矿区大坞河下游下沽口土壤对铜和镉的吸附特点并采用Freundlich等温吸附方程进行拟合,探讨了pH值变化对铜和镉在土壤样品中分配系数的影响。结果表明：土壤铜和镉的吸附特性均符合Freundlich等温吸附方程,得到的金属铜和镉的Kf值分别为354．08、34．132;随着pH值的升高,铜和镉在土壤中的分配系数逐步增大,随后降低,pH值与分配系数关系曲线为单峰曲线。     

The potential of cost-effective coconut husk for the removal of toxic metal ions for environmental protection

Coconut (Cocos nucifera) husk, an agricultural waste, has been thoroughly investigated for the removal of toxic Cd(II), Cr(III) and Hg(II) ions from aqueous media. The parameters like nature and composition of electrolyte, concentration of toxic ions, dosage of coconut husk, and equilibration time between the two phases were optimized for their maximum accumulation onto the solid surface. The effect of common ions on the uptake of metal ions has been monitored under optimal conditions. The variation of retention of each metal ion with temperature was used to compute the thermodynamic quantities DeltaH, DeltaS and DeltaG. The values 18.1+/-0.6 kJmol(-1), 74+/-2 Jmol(-1)K(-1), and -3.8+/-0.04 kJmol(-1) at 298 K; 10.8+/-0.8 kJmol(-1), 48.8+/-2.7 Jmol(-1)K(-1), and -4.6+/-0.3 kJmol(-1) at 298 K; and -37.4+/-2k Jmol(-1), 105+/-7 Jmol(-1)K(-1) and -2.58+/-0.5 kJmol(-1) at 298 K were obtained for Cd(II), Cr(III) and Hg(II) ions, respectively. The sorption data were analysed by applying different sorption isotherms. The sorption capacity and energy were evaluated for each metal ion. The values of the Freundlich constants 1/n and C(m) were 0.92+/-0.04 and 52.6+/-22.2 mmolg(-1); 0.85+/-0.05 and 56.0+/-0.03 mmolg(-1); and 0.88+/-0.03 and 6.84+/-0.45 mmolg(-1) for Cd(II) Cr(III) and Hg(II) ions, respectively. Similarly, the Dubinin-Radushkevich (D-R) constants beta, X(m,) and E were evaluated for the three metal ions. To check the selectivity of the sorbent, sorption of a number of elements was measured under similar conditions. Separation of Zn(II) from Cd(II); Cr(III) from I(I), Zr(IV), Se(IV), and Hg(II) from Se(IV) and Zn(II) can be achieved using this sorbent. This cheap material has potential applications in analytical chemistry, water decontamination, industrial effluent treatment and in pollution abatement.     

Adsorptive removal of an acid dye by lignocellulosic waste biomass activated carbon: equilibrium and kinetic studies

Chemically prepared activated carbon material derived from palm flower was used as adsorbent for removal of Amido Black dye in aqueous solution. Batch adsorption studies were performed for the removal of Amido Black 10B (AB10B), a di-azo acid dye from aqueous solutions by varying the parameters like initial solution pH, adsorbent dosage, initial dye concentration and temperature with three different particle sizes such as 100 μm, 600 μm and 1000 μm. The zero point charge was pH 2.5 and the maximum adsorption occurred at the pH 2.3. Experimental data were analyzed by model equations such as Langmuir, Freundlich and Temkin isotherms and it was found that the Freundlich isotherm model best fitted the adsorption data and the Freundlich constants varied from (K_F) 1.214, 1.077 and 0.884 for the three mesh sizes. Thermodynamic parameters such as ΔG, ΔH and ΔS were also calculated for the adsorption processes and found that the adsorption process is feasible and it was the endothermic reaction. Adsorption kinetics was determined using pseudo first-order, pseudo second-order rate equations and also Elovich model and intraparticle diffusion models. The results clearly showed that the adsorption of AB10B onto lignocellulosic waste biomass from palm flower (LCBPF) followed pseudo second-order model, and the pseudo second-order rate constants varied from 0.059 to 0.006 (g mg⁻¹ min) by varying initial adsorbate concentration from 25 mg L⁻¹ to 100 mg L⁻¹. Analysis of the adsorption data confirmed that the adsorption process not only followed intraparticle diffusion but also by the film diffusion mechanism.     

Biosorption of nickel(II) from aqueous solution by Aspergillus niger: Response surface methodology and isotherm study

In the present study, the effects of biosorbent Aspergillus niger dosage, initial solution pH and initial Ni(II) concentration on the uptake of Ni(II) by NaOH pretreated biomass of A. niger from aqueous solution were investigated. Batch experiments were carried out in order to model and optimize the biosorption process. The influence of three parameters on the uptake of Ni(II) was described using a response surface methodology (RSM) as well as Langmuir and Freundlich isotherm models. Optimum Ni(II) uptake of 4.82 mg Ni(II) g⁻¹ biomass (70.30%) was achieved at pH 6.25, biomass dosage of 2.98 g L⁻¹ and initial Ni(II) concentration of 30.00 mg L⁻¹ Ni(II). Langmuir and Freundlich were able to describe the biosorption isotherm fairly well. However, prediction of Ni(II) biosorption using Langmuir and Freundlich isotherms was relatively poor in comparison with RSM approaches. The biosorption mechanism was also investigated by using Fourier transfer infrared (FT-IR) analysis of untreated, NaOH pretreated, and Ni(II) loaded A. niger biomass.