The COVID-19 puzzle: a global nightmare

Environment, Development and Sustainability - In December 2019, WHO was informed with several unknown pneumonia cases and later it was found as highly contagious, transmittable and pathogenic viral...     

The role of endogenous nitric oxide in melatonin-improved tolerance to lead toxicity in maize plants

Melatonin (MT) and nitric oxide (NO) are known as scavengers of free radicals and an antioxidant against biotic and abiotic stresses in plant defense systems. However, whether NO interplays role in MT-induced antioxidant defense remains to be determined in the plants exposed to lead (Pb) toxicity. So, two experiments were designed to evaluate the role of NO in MT-mediated tolerance of maize plants to Pb stress. In the initial experiment, prior to starting different treatments, a solution of 0.05- or 0.10-mM MT was sprayed every other day for a period of 10 days to the leaves of maize plants exposed to Pb stress (0.1-mM PbCl₂). Pb toxicity significantly caused reduction in plant biomass (both fresh and dry), PSII maximum efficiency (F_v/F_m), total chlorophyll, leaf potassium (K), calcium (Ca), and leaf water potential, but it resulted in increased levels of proline, hydrogen peroxide (H₂O₂), malondialdehyde (MDA), electron leakage (EL), leaf Pb, and endogenous NO. An addition experiment was set up to further understand whether NO played role in mitigation of Pb toxicity in maize plants by MT using scavengers of NO and cPTIO combined with the MT treatments. MT-induced tolerance to Pb toxicity was totally eliminated by cPTIO by reversing endogenous NO. The present results clearly indicated that MT mediated the endogenous NO to improve tolerance of maize plants to Pb toxicity. This evidence was also supported by the increases of H₂O₂ and MDA and reduces some antioxidant enzyme activities tested as well as the plant growth inhibition and increased leaf Pb content by application of MT combined with cPTIO.

     

Composting of municipal solid waste by different methods improved the growth of vegetables and reduced the health risks of cadmium and lead

Environmental Science and Pollution Research - Reutilization of putrescible municipal solid wastes (MSW) in agriculture can provide valuable plant nutrients. However, it may pose serious...     

Risk assessment of heavy metal(loid)s via Spinacia oleracea ingestion after sewage water irrigation practices in Vehari District

Environmental Science and Pollution Research - The use of sewage water as an irrigation source can be beneficial in agricultural practices, however, it may result in human health risks due to the...     

Estimation of spatial distrubition of groundwater level and risky areas of seawater intrusion on the coastal region in Çarşamba Plain,Turkey, using different interpolation methods

Groundwater level plays a significant role in coastal plains. Heavy pumping and excessive use of near-coast groundwater can increase the intrusion of seawater into the aquifers. In the present study, groundwater levels were measured at 59 groundwater wells at different times during pre- and post-irrigation seasons (April and September of the year 2012) in Çar?amba Plain, Turkey. To select the best method, two deterministic interpolation methods (inverse distance weighing (IDW) with the weights of 1, 2, and 3 and radial basis function (RBF) with spline with tension (SPT) and completely regularized spline (CRS)) and two stochastic methods (ordinary kriging (OK) with spherical, exponential, and Gaussian variograms) and cokriging (COK)) were compared and then the best interpolation method was used to evaluate the spatial distribution of groundwater levels in different seasons and seasonal changes. A total of nine different techniques were tested. Also, risky areas of seawater intrusion in coastal area were determined using the best methods for two periods. The performance of these interpolation methods is evaluated by using a validation test method. Statistical indices of correlation (R ²), mean absolute error (MAE), and root-mean-square error (RMSE) were used to select and validate the best methods. Comparisons between predicted and observed values indicated RBF as the optimal method for groundwater level estimation in April and September. When the best method RBF and the worst method IDW were compared, significant differences were observed in the spatial distribution of groundwater. Results of the study also revealed that excessive groundwater withdrawals during the post-irrigation season dropped the groundwater levels up to 2.0 m in some sections. With regard to seawater intrusion, 9,103 ha of land area was determined to be highly risky and risky.     

Mineral contents and proximate composition of Pistacia vera kernels

The mineral contents of Pistacia vera kernels were determined by inductively coupled plasma-atomic emission spectroscopy (ICP-AES). The minimum and maximum values of K, P, Ca, Mg, and S elements ranged from 6,333 to 8,064 mg/kg, 3,630 to 5,228 mg/kg, 1,614 to 3,226 mg/kg, 1,716 to 2,402 mg/kg, and 1,417 to 1,825 mg/kg, respectively. In addition, the mean values of Fe, Zn, Cu, Mn, B, Mo, Cr and Ni elements were determined as 42.48, 20.52, 12.81, 7.48, 11.31, 0.106, 0.511 and 1.67 mg/kg, respectively. Ash levels of kernels were found between 2.28 % (Urfa) and 2.79 % (Halebi). In addition, crude oil and protein contents were determined between 48.8 % (Halebi) to 55.3 % (Siirt) and 23.33 % (Uzun) to 27.16 % (Halebi), respectively.     

Assessment of trace metal concentrations in muscle tissue of certain commercially available fish species from Kayseri,Turkey

Regular consumption of fish has been widely recommended by health authorities. However, it is known that some species accumulate high levels of contaminants including heavy metals (e.g., Hg, Cd, Pb, and As). In this study, Cu, Pb, Co, Ni, Cr, Mn, Cd, and Fe were determined in the muscle tissue of 11 commercially available fish species (Sparus auratus, Dicentrarchus labrax, Mullus barbatus, Belone belone, Psetta maxima, Epinephelus aeneus, Salmothymus, Soleidae, Pomatomus saltatrix, Engraulis encrasicolus, and Sarda sarda) supplied from retailers in Kayseri, Turkey. Determinations were carried out by flame atomic absorption spectrometry after the wet digestion method. The average metal concentrations of the 11 species were determined in the range of 0.54–1.79, 0.82–1.40, 2.38–4.54, 1.23–3.67, 5.01–5.97, 0.77–3.59, 0.48–1.06, and 5.05–122.8 μg/g wet weight for Cu, Pb, Co, Ni, Cr, Mn, Cd, and Fe, respectively. The permissible tolerable daily intake (PTDI) and calculated daily intake (CDI) values were compared, and the calculated daily intake values of the samples were found to be below the established values. Correlations between the metal contents in samples were investigated by performing correlation tests with SPSS 13.0 for windows.     

Determination of Au(III) and Pd(II) ions by flame atomic absorption spectrometry in some environmental samples after solid phase extraction

A simple and sensitive solid phase extraction method was developed for simultaneous separation and preconcentration of gold and palladium ions with N-(4-methylphenyl)-2-{[(4-phenyl-5-pyridine-4-yl-4H-1,2,4-triazol-3-yl)thio]acetyl}hydrazine carbo thioamide complex on Amberlite XAD-1180 resin before their determination by flame atomic absorption spectrometry. Some analytical parameters such as HNO₃ concentration of the sample solution, amount of complexing agent, sample volume, eluent type and volume, effects of foreign ions and adsorption capacity of the resin were investigated for quantitative recovery of gold and palladium ions. The effects of some anions and cations were also examined. Under optimum conditions, the detection limits for gold and palladium ions were found to be 0.29 and 0.19 μg L^?1, respectively. The preconcentration factor for gold and palladium was 250. After being validated by standard addition and analysis of standard reference material, the procedure was successfully applied to the analysis of sea and stream water, anodic slime, gold ore, soil and electronic waste.     

Biodiesel production from vegetable oil and waste animal fats in a pilot plant

In this study, corn oil as vegetable oil, chicken fat and fleshing oil as animal fats were used to produce methyl ester in a biodiesel pilot plant. The FFA level of the corn oil was below 1% while those of animal fats were too high to produce biodiesel via base catalyst. Therefore, it was needed to perform pretreatment reaction for the animal fats. For this aim, sulfuric acid was used as catalyst and methanol was used as alcohol in the pretreatment reactions. After reducing the FFA level of the animal fats to less than 1%, the transesterification reaction was completed with alkaline catalyst. Due to low FFA content of corn oil, it was directly subjected to transesterification. Potassium hydroxide was used as catalyst and methanol was used as alcohol for transesterification reactions. The fuel properties of methyl esters produced in the biodiesel pilot plant were characterized and compared to EN 14214 and ASTM D6751 biodiesel standards. According to the results, ester yield values of animal fat methyl esters were slightly lower than that of the corn oil methyl ester (COME). The production cost of COME was higher than those of animal fat methyl esters due to being high cost biodiesel feedstock. The fuel properties of produced methyl esters were close to each other. Especially, the sulfur content and cold flow properties of the COME were lower than those of animal fat methyl esters. The measured fuel properties of all produced methyl esters met ASTM D6751 (S500) biodiesel fuel standards.     

Application of life cycle assessment for hospital solid waste management: A case study

This study was meant to determine environmental aspects of hospital waste management scenarios using a life cycle analysis approach. The survey for this study was conducted at the largest hospital in a major city of Pakistan. The hospital was thoroughly analyzed from November 2014 to January 2015 to quantify its wastes by category. The functional unit of the study was selected as 1 tonne of disposable solid hospital waste. System boundaries included transportation of hospital solid waste and its treatment and disposal by landfilling, incineration, composting, and material recycling methods. These methods were evaluated based on their greenhouse gas emissions. Landfilling and incineration turned out to be the worst final disposal alternatives, whereas composting and material recovery displayed savings in emissions. An integrated system (composting, incineration, and material recycling) was found as the best solution among the evaluated scenarios. This study can be used by policymakers for the formulation of an integrated hospital waste management plan.

Implications: This study deals with environmental aspects of hospital waste management scenarios. It is an increasing area of concern in many developing and resource-constrained countries of the world. The life cycle analysis (LCA) approach is a useful tool for estimation of greenhouse gas emissions from different waste management activities. There is a shortage of information in existing literature regarding LCA of hospital wastes. To the best knowledge of the authors this work is the first attempt at quantifying the environmental footprint of hospital waste in Pakistan.