A study on the determination of the natural park’s sustainable tourism potential

The surface site of Yesilyuva Nature Park encompasses natural, social, economic, and cultural characteristics and has become a marker of the region’s natural and cultural heritage. To support the preservation of this site, promotional activities should be planned. In this study, because of tourism and related opinions of residents and visitors alike in terms of their natural determination, an important cultural and historical feature is aimed at evaluating the tourism potential of Yesilyuva Nature Park. This framework is designed to establish prospective tourism sustainability. As a result, Yesilyuva Nature Park’s natural and cultural properties have been determined to be suitable for sustainable tourism activities using geographic information systems (GIS). This protection in the field, which balances sustainability and landscape design, will provide for the development of tourism activities. In the Strengths, Weaknesses, Opportunities and Threats (SWOT) analysis and survey, residents and visitors reported that the most important feature of the Yesilyuva Nature Park was its natural beauty. Visitors often come to observe traditional and natural life and to engage in tourism activities. All the data, which includes maps derived from GIS, represents landscape planning for sustainable tourism areas in Yesilyuva Nature Park.     

Toward a green economy: The nexus between economic and environmental factors in MENA countries,ARDL bounds approach

With the transition of the global economy toward a green economy, it is important to analyze the elements that can either support or impede this transformation. Therefore, in this study, we aimed to evaluate the potential of the green economy in the Middle East and North Africa (MENA) countries by analyzing the correlation between economic and environmental factors. The objective of this study is to explore the potential of the green economy in MENA countries by analyzing key factors such as access to clean fuel, GDP, and CO₂ emissions. The study aims to distinguish between long- and short-term effects, assess the presence of a long-run relationship or co-integration between the parameter estimates, and evaluate the progress of MENA countries toward a green economy based on the impact of economic, and environmental factors. Using quarterly and seasonally adjusted data from 2000 to 2018, the auto-regressive distributed lag (ARDL) technique was employed to examine the co-integration of the factors in the long and short terms. Multiple cointegration techniques were also used to determine the feasibility of a green economy by analyzing the relationship between access to clean fuel for technology and cooking, GDP, and CO₂ emissions. The study's findings indicate a clear long- and short-term relationship between the analyzed factors, as confirmed by the error correction model (ECM) which suggests that the variables are cointegrated and potentially relevant. Additionally, the result of the autoregressive distributed lag bound test shows that the green economy variables, GDP, CO₂ emissions, and access to clean fuel, are cointegrated in the long-term.     

对核磁共振成像仪建设项目环境影响评价的研究

核磁共振作为一种分析手段广泛应用于物理、化学、生物、医疗等领域.本文从核磁共振原理出发,分析核磁共振成像仪主要环境影响,结合环评现状,分析环评管理存在的主要问题,结合相关法规条文,查找存在这些问题的主要原因,结合目前核磁共振仪的建设情况和使用条件,从切合实际角度出发,提出核磁共振成像仪建设项目环评管理建议.     

Biodiesel production from vegetable oil and waste animal fats in a pilot plant

In this study, corn oil as vegetable oil, chicken fat and fleshing oil as animal fats were used to produce methyl ester in a biodiesel pilot plant. The FFA level of the corn oil was below 1% while those of animal fats were too high to produce biodiesel via base catalyst. Therefore, it was needed to perform pretreatment reaction for the animal fats. For this aim, sulfuric acid was used as catalyst and methanol was used as alcohol in the pretreatment reactions. After reducing the FFA level of the animal fats to less than 1%, the transesterification reaction was completed with alkaline catalyst. Due to low FFA content of corn oil, it was directly subjected to transesterification. Potassium hydroxide was used as catalyst and methanol was used as alcohol for transesterification reactions. The fuel properties of methyl esters produced in the biodiesel pilot plant were characterized and compared to EN 14214 and ASTM D6751 biodiesel standards. According to the results, ester yield values of animal fat methyl esters were slightly lower than that of the corn oil methyl ester (COME). The production cost of COME was higher than those of animal fat methyl esters due to being high cost biodiesel feedstock. The fuel properties of produced methyl esters were close to each other. Especially, the sulfur content and cold flow properties of the COME were lower than those of animal fat methyl esters. The measured fuel properties of all produced methyl esters met ASTM D6751 (S500) biodiesel fuel standards.     

Peat fire effects on some properties of an artificially drained peatland

The management of artificially drained organic soils is a very important issue, since the accelerated mineralization and sometimes peat fires alter physical and chemical properties of soils and the availability of plant nutrients. This study was performed to determine relatively short- and long-term effects of peat fires on some physical and chemical properties of soils in the artificially drained Gavur Lake Peatland of Turkey. To achieve this objective, measured properties of soils burned in 2001, burned in 1965, and unburned were compared. The results indicated that soil bulk density, pH, amounts of soluble salts, CaCO3, and concentrations of ammonium acetate-extractable (AAE) Ca, Mg, K, and Na were significantly higher for both sampling depths in the burned areas. The areas burned in 2001 had higher pH, soluble salts, and the concentrations of AAE Ca, Mg, and K compared with sites burned in 1965, and this was reasoned with leaching losses and plant uptake of these basic cations for four decades in the latter. Percent saturation and organic carbon contents of soils, however, were significantly lower in the burned areas for both sampling depths. Olsen P levels were not significantly different between the sites. This work clearly shows that alterations in soils properties with peat fires do not recover in the long term.     

Utilization of red mud as catalyst in conversion of waste oil and waste plastics to fuel

The aim of this study was to investigate the possibilities of using a by-product (red mud) from alumina production as a catalyst for recovery of waste. The conversion of waste mineral oil (WMO) and waste mineral oil/municipal waste plastic (WMO/MWP) blends over red mud (RM), a commercial hydrocracking catalyst (silica–alumina), and a commercial hydrotreating catalyst (Ni–Mo/alumina) to fuel has been studied. The effect of the catalyst and the temperature on the product distribution (gas, liquid, and wax) and the properties of liquid products were investigated. In the case of hydrotreatment of WMO, the liquids obtained over RM at both 400° and 425°C had larger amounts of low-boiling hydrocarbons than that of thermal or catalytic treatment with hydrotreating catalyst. Gas chromatography and nuclear magnetic resonance analysis of the liquid products showed that RM had hydrogenation and cracking activity in hydrotreatment of WMO. In coprocessing of WMO with municipal waste plastics, temperature had an important effect as well as the amount of MWP in the blend and the catalyst type. The hydrocracking at 400°C produced no liquid product. In hydrocracking at 425°C, the product distribution varied with catalyst type and MWP amount. The commercial hydrocracking catalyst had more cracking ability in the conversion of WMO/MWP to liquid and gas fuel than RM. In the case of hydrocracking over RM, the largest amount of liquid having satisfactory quality was obtained only from the blend containing 20% MWP.     

Investigation of heavy metal contaminations in the lower Sakarya river water and sediments

In this work, water and sediment samples were collected from three different stations located along the Sakarya river between May and September 2003. Lead, copper, chromium, zinc, nickel and cadmium concentrations were determined by using solvent extraction and flame atomic absorption spectrometric method. The results show that differences based upon sampling times, regions, sediment and water samples were observed. The mean levels of copper, nickel, chromium, lead, cadmium, zinc for sediment samples are; 4.630 μg g⁻¹, 13.520 μg g⁻¹, 8.780 μg g⁻¹, 2.550 μg g⁻¹, 9.990 μg g⁻¹ and for water samples are; 0.851 μg g⁻¹, 1.050 μg g⁻¹, 0.027 μg g⁻¹, 1.786 μg g⁻¹, 0.236 μg g⁻¹, 0.173 μg g⁻¹, respectively.     

Isolation and Identification of Enterococci from Seawater Samples: Assessment of Their Resistance to Antibiotics and Heavy Metals

A hundred Enterococcus strains were isolated from seawater samples collected from coastal areas of Istanbul. Isolates were identified to the species level using standard biochemical tests specified by Facklam and Collins. The species distribution was as follows Enterococcus faecalis (96%), Enterococcus gallinarum (3%) and Enterococcus solitarius (1%). The resistance of bacteria to both heavy metals (zinc [Zn], iron [Fe], cadmium [Cd], chrome [Cr], cobalt [Co]) and antibiotics (ampicillin 10 μg [AP], penicillin G 10 Units [PG], gentamycin 10 μg [GM], streptomycin 10 μg [S], chloramphenicol 10 μg [C], erythromycin 15 μg [E], kanamycin 30 μg [K], amikacin 30 μg [AK], nalidixic acid 30 μg [NA], and vancomycin 30 μg [VA]) was evaluated. None of the strains was resistant to VA. It was found that among the 100 isolates, those that exhibit resistance to antibiotics, particularly NA, S and K, were also resistant all the heavy metals tested. To our knowledge this is the first report focusing on determination of resistance of environmental enterococci found in Istanbul against heavy metals and antibiotics. Thus, combined expressions of antibiotic and heavy metal resistance may help to reinforce ecological and epidemiological studies and to determine the role of these strains in antibiotic and heavy metal resistance dissemination.     

Real-Time PCR Detection of Norovirus in Mussels Collected from the Bosphorus in Istanbul,Turkey

Norovirus (NoV) is recognised as one of the most common causes of foodborne infections, and shellfish are a well-documented source of this virus. The presence of NoV in shellfish has not previously been investigated in Turkey, and hence the aim of this study was to determine the frequency of human NoV genogroups I and II in mussels collected from the Bosphorus, Istanbul, Turkey. A total of 320 mussels representing 110 samples originating along the Bosphorus coast were collected from fish distributors. RNA was extracted using the RNeasy Mini Kit and real-time RT–PCR performed using primers specific for NoV genogroup I and II. Amongst the 110 samples, 5 (4.5%) were found to be positive for NoV genogroup II by SYBR Green assay; no genogroup I was detected. A positive signal was obtained by SYBR Green for NoV Genogroup II in mussels collected in October, November and December 2008, and February and July 2009. Only four out of five SYBR Green positive samples could be confirmed by the use of a NoV GII probe-based real-time RT–PCR. The average count and SD of Enterobactericaeae, E. coli and sulphide reductase anaerobic bacteria in PCR positive mussels were 3.56 log ± 0.96 log, 2.32 log ± 0.77 log and 1.70 log ± 0.56 log, respectively. This study shows that NoV Genogroup II is present in mussels collected from the Bosphorus, Istanbul, and may constitute a risk to human health.