Risk assessment of heavy metal(loid)s via Spinacia oleracea ingestion after sewage water irrigation practices in Vehari District

Environmental Science and Pollution Research - The use of sewage water as an irrigation source can be beneficial in agricultural practices, however, it may result in human health risks due to the...     

Groundwater quality assessment and its correlation with gastroenteritis using GIS: a case study of Rawal Town,Rawalpindi, Pakistan

Majority of the people of Pakistan get drinking water from groundwater source. Nearly 40 % of the total ailments reported in Pakistan are the result of dirty drinking water. Every summer, thousands of patients suffer from acute gastroenteritis in the Rawal Town. Therefore, a study was designed to generate a water quality index map of the Rawal Town and identify the relationship between bacteriological water quality and socio-economic indicators with gastroenteritis in the study area. Water quality and gastroenteritis patient data were collected by surveying the 262 tubewells and the major hospitals in the Rawal Town. The collected spatial data was analyzed by using ArcGIS spatial analyst (Moran’s I spatial autocorrelation) and geostatistical analysis tools (inverse distance weighted, radial basis function, kriging, and cokriging). The water quality index (WQI) for the study area was computed using pH, turbidity, total dissolved solids, calcium, hardness, alkalinity, and chloride values of the 262 tubewells. The results of Moran’s I spatial autocorrelation showed that the groundwater physicochemical parameters were clustered. Among IDW, radial basis function, and kriging and cokriging interpolation techniques, cokriging showed the lowest root mean square error. Cokriging was used to make the spatial distribution maps of water quality parameters. The WQI results showed that more than half of the tubewells in the Rawal Town were providing “poor” to “unfit” drinking water. The Pearson’s coefficient of correlation for gastroenteritis with fecal coliform was found significant (P?P?P?相似文献   

Effect of slow release nitrogenous fertilizers and biochar on growth,physiology, yield,and nitrogen use efficiency of sunflower under arid climate

Environmental Science and Pollution Research - Sunflower plants need nitrogen consistently and in higher amount for optimum growth and development. However, nitrogen use efficiency (NUE) of...     

Approaches for prevention and environmental management of novel COVID-19

Environmental Science and Pollution Research - The World Health Organization (WHO) recognized a novel coronavirus as the causative agent of a new form of pneumonia. It was subsequently named...     

Indoor Air Quality at Rural and Urban Sites in Pakistan

In the developing world, the vast majority of people rely on solid biomass fuels for cooking and heating which results in poor indoor air quality. The present study determined indoor air quality in some rural and urban areas of Pakistan. Measurements were made of particulate mass (PM10, PM2.5 and PM1), number concentration and bioaerosols in different micro environments. PM10 concentrations of up to 8,555 μg/m³ were observed inside the kitchens where biofuels were used as energy source. Cleaning and smoking was identified as a major source of indoor particulate pollution and concentrations of more than more than 2,000 μg/m³ were recorded in the living room during these activities. Indoor number concentrations in Lahore were typically greater than those observed outdoors in European cites. At a rural site the highest Colony Forming Units (CFUs) were in the 0.5 μm–2 μm size fraction, while at the urban location CFUs were dominant for 2 μm–16 μm. It was observed that CFUs(Colony Forming Units) counts were higher inside living rooms than kitchens. It is important to note that women and children were exposed to extremely high levels of particulates during cooking. Overall, indoor air quality in Pakistan was poor and there is a dire need to take a serious step to combat with it.     

COLONIZATION OF VIGNA RADIATA ROOTS BY CHROMIUM RESISTANT BACTERIAL STRAINS OF OCHROBACTRUM INTERMEDIUM, BACILLUS CEREUS AND BREVIBA CTERIUM SP.

The rhizosphere is the constricted zone of soil surrounding theroot that is under the immediate influence of root system.This zoneis rich in nutrients compared with bulk soil,due to the accumula-tion of various organic compounds released from roots by exu…     

Landfill leachate treatment by electrochemical oxidation

This study investigated the electrochemical oxidation of stabilized leachate from Pulau Burung semi-aerobic sanitary landfill by conducting laboratory experiments with sodium sulfate Na₂SO₄ (as electrolyte) and graphite carbon electrodes. The control parameters were influent COD, current density and reaction time, while the responses were BOD removal, COD removal, BOD:COD ratio, color and pH. Na₂SO₄ concentration was 1 g/L. Experiments were conducted based on a three-level factorial design and response surface methodology (RSM) was used to analyze the results. The optimum conditions were obtained as 1414 mg/L influent COD concentration, 79.9 mA/cm² current density and 4 h reaction time. This resulted in 70% BOD removal, 68% COD removal, 84% color removal, 0.04 BOD/COD ratio and 9.1 pH. Electrochemical treatment using graphite carbon electrode was found to be effective in BOD, COD and color removal but was not effective in increasing the BOD/COD ratio or enhancing biodegradability of the leachate. The color intensity of the treated samples increased at low influent COD and high current density due to corrosion of electrode material.     

Growth stimulation of Triticum aestivum seedlings under Cr-stresses by non-rhizospheric pseudomonad strains

Four chromium-resistant non-rhizospheric strains SPCr-1, SPCr-2, SPCr-3 and SPCr-4 (Pseudomonads), which were isolated from the effluents of an ICI paint factory and could tolerate 2-3 mg ml(-1) chromium in a minimal medium and 40 mg ml(-1) in a rich medium, were used to inoculate seeds of Triticum aestivum. Both inoculated and non-inoculated seeds were germinated and grown under different concentrations of chromium salts (K2CrO4, 0, 100, 250, 500; CrCl3, 0, 250, 500, 1000 microg ml(-1)). Germination and growth parameters were severely affected by chromium-salts. K2CrO4 had more drastic effects than CrCl3 treatments. Seedlings had a hard and brittle texture and showed symptoms of hypertrophy. Brown spots on leaves and stems were visible and the tips of leaves were bifurcated and curled. The root system was also impaired, ranging from a browning of the tip to complete destruction of cortical tissues. Under chromium-stress conditions, inoculated plants had significantly better germination and growth as compared to non-inoculated treatments. Bacterial growth enhancement of seedlings was associated with reduced chromium-uptake, increased auxin content and the formation of stress specific proteins. With bacterial inoculations, symptoms of chromium toxicity were reversed, especially at lower concentrations of chromium salts.     

The effects of lead-resistant pseudomonads on the growth of Triticum Aestivum seedlings under lead stress

Five Pseudomonad strains, SPb-1, SPb-2, SPb-3, (from a water sample), SPb-4, and SPb-5 (from rhizosphere), which could tolerate lead acetate up to 1000 microm ml(-1), were isolated from an industrially polluted area around Kasoor, Pakistan. Only SPb-5 harbours a lead-resistant plasmid. Triticum aestivum seeds inoculated with strains SPb-4 and SPb-5 were germinated and grown under different concentrations (0, 1, 5, 10, 15 and 20 mM) of lead acetate for ten days. Germination and seedling growth were adversely affected. Poor growth was associated with increased lead content of seedlings. With bacterial inoculation, germination and seedling growth were improved, as compared with non-inoculated treatments. Stimulation in the growth of seedlings was accompanied by a decrease in lead content, as compared with non-inoculated treatments.     

Characteristics of granular sludge developed in an upflow anaerobic sludge fixed-film bioreactor treating palm oil mill effluent.

In the present study, characteristics of the granular sludge (including physical characteristics under stable conditions and process shocks arising from suspended solid overload, soluble organic overload, and high temperature; biological activity; and sludge kinetic evaluation in a batch experiment) developed in an upflow anaerobic sludge blanket fixed-film reactor for palm oil mill effluent (POME) treatment was investigated. The main aim of this work was to provide suitable understanding of POME anaerobic digestion using such a granular sludge reactor, particularly with respect to granule structure at various operating conditions. The morphological changes in granular sludge resulting from various operational conditions was studied using scanning electron microscopy and transmission electron microscopy images. It was shown that the developed granules consisted of densely packed rod- (Methanosaeta-like microorganism; predominant) and cocci- (Methanosarsina) shaped microorganisms. Methanosaeta aggregates functioned as nucleation centers that initiated granule development of POME-degrading granules. Under the suspended solid overload condition, most of the granules were covered with a thin layer of fiberlike suspended solids, so that the granule color changed to brown and the sludge volume index also increased to 24.5 from 12 to 15 mL/g, which caused a large amount of sludge washout. Some of the granules were disintegrated because of an acidified environment, which originated from acidogenesis of high influent organic load (29 g chemical oxygen demand [COD]/L d). At 60 degrees C, the rate of biomass washout increased, as a result of disintegration of the outer layer of the granules. In the biological activity test, approximately 95% COD removal was achieved within 72 hours, with an initial COD removal rate of 3.5 g COD/L d. During POME digestion, 275 mg calcium carbonate/L bicarbonate alkalinity was produced per 1000 mg COD(removed)/ L. A consecutive reaction kinetic model was used to simulate the data obtained from the sludge activity in the batch experiment. The mathematical model gave a good fit with the experimental results (R2 > 0.93). The slowest step was modeled to be the acidification step, with a rate constant between 0.015 and 0.083 hours(-1), while the rate constant for the methanogenic step was obtained to be between 0.218 and 0.361 hours(-1).