废旧车用动力锂离子电池的回收利用现状

论述了废旧车用动力锂离子电池的国内外回收利用现状,并鼓励相关企业进行梯级利用,当废旧动力锂离子电池不再适合梯级利用时,则进行回收处理。基于废旧动力锂离子电池正极涂层中的有价金属回收机理,将回收工艺归纳为物理化学法、化学法和生物法三大类,概括了现阶段我国汽车动力锂离子电池回收存在的一些问题和发展趋势。总体看来,动力锂离子电池的回收利用不仅能带来巨大的环境效益,同时也能产生显著的经济和社会效益。     

贵州煤矿酸性废水“被动处理”技术的新方法探讨

论文在综述国内外有关酸性矿山废水治理的现行技术和方法的基础上,围绕贵州煤矿废水排放的现状及特点,把贵州煤矿废水归纳为两种主要类型,并针对性地提出两种预防和治理矿山酸性排水的方法:对正在开采矿山实行碳酸盐岩充填采空区技术,避免酸性矿山水外排;对废弃矿山排水采取坑口"(有氧/缺氧)垂向折流式反应池"技术,对酸性废水进行有效治理。     

Cationic organobismuth complex as an effective catalyst for conversion of CO2 into cyclic carbonates

In order to achieve high-efficiency conversion of CO₂ into valuable chemicals, and to exploit new applications of organobismuth compounds, cationic organobismuth complex with 5,6,7,12-tetrahydrodibenz[c,f][1,5] azabismocine framework was examined for the first time for the coupling of CO₂ into cyclic carbonates, using terminal epoxides as substrates and tetrabutylammonium halide as co-catalyst in a solvent-free environment under mild conditions. It is shown that the catalyst exhibited high activity and selectivity for the coupling reaction of CO₂ with a wide range of terminal epoxide. The selectivity of propylene carbonates could reach 100%, and the maximum turnover frequency was up to 10740 h⁻¹ at 120°C and 3 MPa CO₂ pressure when tetrabutylammonium iodide was used as co-catalyst. Moreover, the catalyst is environment friendly, resistant to air and water, and can be readily reused and recycled without any loss of activity, demonstrating a potential in industrial application.     

Experimental study on sediment-copper distributions in hyper-concentrated turbulent solid-liquid system

This study presents a special problem on vertical distribution for sediment and copper in hyper-concentrated turbulent solid-liquid system that is essentially different from the ordinary low-concentrated turbulent system. A resonance type turbulent simulation equipment is used for the experimental study in which a vertically uniform turbulent field of the mixture of loess and water is produced in a testing cylinder with a grille stirrer that moves up and down harmoniously with varying vibration frequencies, in order to compare the variations of the vertical profiles of sediment and copper in low- and hyper-concentratod solid-liquid system, different scenarios for input sediment content ranging from 5 to 800 kg/m^3 was considered in the experimental studies. It was found that solids copper content increases with input sediment content, So, and reaches its peak as So goes to 10 kg/m^3 and then decreases rapidly with increasing input sediment content. Such a behavior is possibly resulted from the joint effect of the specific adsorption of copper on loess, precipitation of carbonate and hydroxide of copper due to high carbonate content in the loess and the so-called ＂particulate concentration effect＂ due to the present of the sediment variation in water. The vertical sediment concentration distribution resulted from the uniform turbulence is generally uniform, but slight non-uniformity does occur as sediment concentration exceeds certain value. However, the vertical concentration distributions of soluble copper seem not to be affected much by the variation of sediment concentrations.     

Removal of phenol by activated alumina bed in pulsed high-voltage electric field

A new process for removing the pollutants in aqueous solution-activated alumina bed in pulsed high-voltage electric field was investigated for the removal of phenol under different conditions. The experimental results indicated the increase in removal rate with increasing applied voltage, increasing pH value of the solution, aeration, and adding Fe^2＋. The removal rate of phenol could reach 72.1% when air aeration flow rate was 1200 ml/min, and 88.2% when 0.05 mmol/L Fe^2＋ was added into the solution under the conditions of applied voltage 25 kV, initial phenol concentration of 5 mg/L, and initial pH value 5.5. The addition of sodium carbonate reduced the phenol removal rate. In the pulsed high-voltage electric field, local discharge occurred at the surface of activated alumina, which promoted phenol degradation in the thin water film. At the same time, the space-time distribution of gas-liquid phases was more uniform and the contact areas of the activated species generated from the discharge and the pollutant molecules were much wider due to the effect of the activated alumina bed. The synthetical effects of the pulsed high-voltage electric field and the activated alumina particles accelerated phenol degradation.     

硫酸亚铁的综合利用

以工业废弃物硫酸亚铁为原料,加入碳酸氢铵和氯化钾,通过一系列化学反应和过滤、蒸发、煅烧等步骤,可制得硫酸钾、氯化铵、氧化铁红和液态二氧化碳.原料中各主要成分的利用率均达94%以上.     

GROUNDWATER GEOCHEMISTRY IN THE SEMINOLE WELL FIELD,CEDAR RAPIDS,IOWA1

The City of Cedar Rapids obtains its municipal water supply from four well fields in an alluvial aquifer along the Cedar River in east-central Iowa. Since 1992, the City and the U.S. Geological Survey have cooperatively studied the groundwater-flow system and water chemistry near the well fields. The geochemistry in the alluvial aquifer near the Seminole Well Field was assessed to identify potentially reactive minerals and possible chemical reactions that produce observed changes in water chemistry. Calcite, dolomite, ferrihydrite, quartz, rhodochrosite, and siderite were identified as potentially reactive minerals by calculating saturation indexes. Aluminosiicate minerals including albite, Ca-montmorillonite, gibbsite, illite, K-feldspar, and kaolinite were identified as potentially reactive minerals using hypothetical saturation indexes calculated with an assumed dissolved aluminum concentration of 1 microgram per liter. Balanced chemical equations derived from inverse-modeling techniques were used to assess chemical reactions as precipitation percolates to the water table. Calcite dissolution was predominate, but aluminosilicate weathering, cation exchange, and redox reactions also likely occurred. Microbial-catalyzed redox reactions altered the chemical composition of water infiltrating from the Cedar River into the alluvial aquifer by consuming dissolved oxygen, reducing nitrate, and increasing dissolved iron and manganese concentrations. Nitrate reduction only occurred in relatively shallow (3 to 7 meters below land surface) groundwater near the Cedar River and did not occur in water infiltrating to deeper zones of the alluvial aquifer.     

利用含铜蚀刻废液生产碱式碳酸铜

介绍了利用含铜蚀刻废液生产碱式碳酸铜的生产工艺、技术特点、工艺流程和产品质量。以碳酸钠作蚀刻废液的除杂剂,对其进行除杂前处理,控制反应液的pH为3．5～4．0、反应液中碳酸钠的浓度为0．02～0．03mol／L。可除去其中大部分杂质。用碳酸钠与含铜溶液中的铜进行合成反应,控制反应温度为70～80℃、pH为8～9、碳酸钠和含铜溶液中铜的浓度均为1mol／L,反应生成碱式碳酸铜,此产品中铜的质量分数为56％,产品质量优于木材防腐用碱式碳酸铜国内外同类产品。     

废锂电池放电及正极片分离回收处理

研究了废锂电池放电及正极片分离回收处理工艺。实验结果表明:经质量浓度30 g/L NaCl溶液浸泡9.0 h可实现电池放电,残余电压在0.5 V以下;在60℃恒温水浴振荡、NaOH质量浓度40 g/L、废锂电池质量与NaOH溶液体积的比为15 g/L的优化条件下,集流体完全与活性物质分离,回收得到的黑色粉末为LiCoO2活性材料,未见铝杂质的特征峰;通过硫酸中和的方法回收碱浸溶液中的铝,当体系pH为10.0时,可获得最大量的Al(OH)3沉淀,沉淀物颗粒表面光滑,粒径大小不一。     

Biogas upgrading and utilization from ICEs towards stationary molten carbonate fuel cell systems

Biogas production from anaerobic digestion has increased rapidly in the last years, in many parts of the world, mainly due to its local scale disposition and to its potential on greenhouse gases (GHG) emissions mitigation. Biogas can be used as fuel for combined heat and power systems (CHP), in particular for internal combustion engines (ICEs). In recent investigations, fuel cells have been considered as alternative CHP systems. In the present article, two different energy conversion systems are compared: a 1.4 MW class MCFC system, running on pipeline natural gas, and an in situ ICE, running on biogas. In the first case, biogas is considered as a source fuel to obtain upgraded gas to be injected in the natural gas grid. In such scenario, the location of the fuel cell power plant is no longer strictly connected to the anaerobic digester site. Several energy balances are evaluated, considering different upgrading techniques and different biogas methane/carbon dioxide ratios.