ABR工艺预处理木薯酒糟废水的工程应用

木薯酒糟废水有机物浓度高、悬浮物含量大、pH呈酸性、可生化性能较差 ,通常直接采用固液分离—厌氧 (UASB)—好氧曝气生化法处理效果并不理想 ,而采用ABR工艺进行厌氧水解酸化预处理木薯酒糟废水迄今为止未见报道。经绵阳市酒厂废水治理工程证明 ,强化ABR预处理工序是保证后续处理措施能否正常运行的关键     

酸雨作用下中亚带森林冠层淋溶规律研究

2001年1月～2002年6月对韶山亚热带常绿阔叶林4个采样区进行了酸雨的监测,以监测数据为依据,分析研究了林内穿透水中主要离子的淋溶规律。结果表明:大气降水经过森林冠层后pH值明显升高,韶山亚热带常绿阔叶林对SO42-、NO3-、Mg2+、NH4+离子具有吸收作用,特别是NH4+和NO3-离子。SO42-、Ca2+和Mg2+离子的冠层淋溶百分率随降雨量的增加有明显减少的趋势。Ca2+、K+和Cl-随着pH的增加,其冠层淋溶百分率呈增加趋势。韶山地区在常年酸沉降作用下,森林冠层对酸性离子SO42-、NO3-的吸收作用最强。根据18个月离子浓度平均值来计算,韶山地区森林冠层离子的淋溶序列为:K+>Ca2+>Cl->Mg2+>SO42->NO3->NH4+>Na+。     

海绵铁预处理DSD酸废水的研究

用铁泥废渣制备水处理材料海绵铁,研究含碳球团直接还原的金属化率与还原时间,温度和铁泥粒度之间的关系,得到含碳球团制备海绵铁的反应参数。并对海绵铁预处理DSD酸废水的各种影响因素进行了试验研究,确定最佳试验条件;通过试验对海绵铁处理DSD酸废水的机理进行了探讨,确定它是电化学作用、电场作用、絮凝沉淀以及物理吸附等共同作用的结果。试验表明,海绵铁可作为高浓度DSD废水的预处理材料。     

Protozoan colonization on artificial substrates in relation to water quality in a tropical Indian harbour

ＩｎｔｒｏｄｕｃｔｉｏｎＩｎａｑｕａｔｉｃｅｃｏｓｙｓｔｅｍｓｂｉｏｌｏｇｉｃａｌｃｏｍｍｕｎｉｔｉｅｓａｒｅｒｅｍａｒｋａｂｌｙｃｏｍｐｌｅｘｉｎｂｏｔｈｔｈｅｉｒｏｐｅｒａｔｉｏｎａｎｄｒｅｓｐｏｎｓｅｔｏａｎｔｈｒｏｐｏｇｅｎｉｃａｃｔｉｖｉｔｉｅｓ.Ｔｈｉｓｈａｓｌｅｄｍａｎｙｉｎｖｅｓｔｉｇａｔｏｒｓｔｏｃｏｎｄｕｃｔｌａｂｏｒａｔｏｒｙａｎｄｆｉｅｌｄｓｔｕｄｉｅｓｆｏｒｅｖａｌｕａｔｉｎｇｔｈｅｅｃｏｌｏｇｉｃａｌｒｉｓｋｐｏｓｅｄｂｙｈｕｍａｎｓｔｏｅｃｏｓｙｓｔｅｍ(Ｃａｉｒｎｓ…     

高浓度阿维菌素生产废水治理与资源回收技术研究

采用预处理一厌氧水解－二段接触氧化工艺处理阿维菌素废水，在厌氧段停留时间为１０ｈ，好氧段停留时间为６ｈ条件下，厌氧好氧段ＣＯＤ总去除率达９１％，     

Adsorption selectivity of salicylic acid and 5-sulfosalicylic acid onto hypercrosslinked polymeric adsorbents

Both bottle-point and column-feeding experiments involving different solutes and sorbents were carried out to investigate the adsorption selectivity and separation performance of salicylic acid and 5-sulfosalicylic acid. Their adsorption isotherms onto such hypercrosslinked polymeric adsorbents as NDA-100 and NDA-99 could be well described by the Freundlich equations whose characteristics describe extrathermic and favorable adsorption processes. The adsorption towards NDA-100 mainly depended on the π-π interaction, while that towards NDA-99 was extremely influenced by the static-electric interaction. Additionally, the adsorptive capacity of salicylic acid on NDA-99 decreased while it increased on NDA-100 with the presence of 5-sulfosalicylic acid in the adsorptive environment as the competitive component. Comparatively, the adsorption capacity of 5-sulfosalicylic acid decreased on both resins with salicylic acid as the competitive component. In fact, the difference in the interaction between adsorbent and adsorbate resulted in the straight antagonism on the effective adsorption sites on the adsorbent. In conclusion, the adsorption selectivity of salicylic acid onto NDA-100 was obviously larger than that onto NDA-99 with the existence of 5-sulfosalicylic acid in the adsorptive environment. A satisfactory separation and recovery of tested solutes in aqueous phase could be foreseeably achieved by the sequencing adsorption technique involving NDA-100 as well as NDA-99. Translated from Environmental Pollution & Control, 2005, 27(8): 570–574 [译自: 环境污染与防治]     

水－油－表面活性剂体系中油含量测量方法的改进

应用原地灌注表面活性剂溶液法去除地下水系统中包气带石油类污染，建立了测定水－油－表面活性剂体系中油含量的方法，第一次提出采用单宁酸沉淀脂肪醇聚氧乙烯醚以去除其对油含量测定的干扰，并成功地应用于清除地下水石油污染的表面活性剂优选实验当中。     

Effects of simulated acid rain on cation release in soils of South China

This paper deals with the release of base cations and Al3+ at the treatment with simulated acid rain (SAR) in main soil types collected from South China. Results showed that the amounts of base cations increased obviously when the pH value of simulated acid rain was lower than 3.0 or 3.5. Compared with the leaching of K+ and Na+, the leaching of Ca2+ and Mg2+ was affected by the pH value of SAR. Only when the amounts of base cations leached from soils exceeded the cation exchange capacity, the pH value of leaching solutions decreased sharply and the amounts of released Al3+ increased. The H+ buffering mechanisms, which were affected notonly by the pH values of SAR, but also by the types and solid components of soils, were proposed for the main soils studied.     

酸性矿山废水的处理研究

简要分析了酸性矿山废水的主要污染物及危害,叙述了几种主要的处理技术:中和法、硫化沉淀浮选法、微生物法和人工湿地,并介绍了它们的机理、特点及实验研究和工业应用情况,由此对我国的酸性矿山废水的治理技术进行了前景展望。     

两种奥氏体不锈钢酸性盐雾腐蚀行为研究

目的研究0Cr18Ni9(钝化)不锈钢与0Cr18Ni10Ti(钝化)不锈钢在酸性盐雾条件下的腐蚀行为,为发动机零件选材及防护措施的改进提供依据。方法按GJB150.11A—2009《军用装备环境试验方法盐雾试验》进行,调节溶液p H到3.5±0.5,以24 h喷雾润湿+24 h干燥为一个循环,分别开展2(96 h)、4(192 h)、5(240 h)个循环的酸性盐雾试验。采用目视、称量、X射线衍射(XRD)、扫描电子显微镜(SEM)及能谱仪(EDS)对盐雾腐蚀后试样进行观察及分析。结果 0Cr18Ni9(钝化)与0Cr18Ni10Ti(钝化)两种奥氏体不锈钢均发生了轻微的腐蚀,主要为局部腐蚀及均匀腐蚀。结论两种金属在酸性盐雾条件下耐蚀性良好,且可满足目前海军型发动机对材料耐酸性盐雾腐蚀的要求,0Cr18Ni9(钝化)略优于0Cr18Ni10Ti(钝化)。