Prenatal paternity testing by dna analysis

Prenatal paternity testing was evaluated by DNA analysis in chorionic villus biopsies obtained during the 7th-22nd weeks of gestation. Using highly polymorphic variable number of tandem repeats (VNTR) probes, we analysed four cases consisting of mother/child/alleged father trios. In all cases, we were able to detect maternal and paternal alleles and could establish or exclude paternity. The application of DNA analysis represents a new important diagnostic aid for all cases that require a prenatal identification of paternity.     

Enrichment of fetal cells from maternal blood by high gradient magnetic cell sorting (double MACS) for PCR-based genetic analysis

For simple and effective isolation of fetal cells from peripheral maternal blood, we combined depletion of maternal cells and enrichment of fetal cells by high-gradient magnetic cell separation (MACS). First CD45⁺ and CD14⁺ cells were depleted from maternal peripheral blood mononuclear cells by MACS. From the depleted fraction, CD71⁺ erythroid cells were enriched up to 80 per cent by MACS. This ‘double-MACS’ procedure yielded an average depletion rate of 780-fold and an average enrichment rate of 500-fold, with approximate recovery rates of 40–55 per cent. For paternity testing, cells from unseparated blood and the various fractions were analysed for polymorphism of the HLA-DQ-A1 locus and D1S80 locus by the polymerase chain reaction (PCR). In CD45⁻/CD71⁺ sorted cells from maternal blood, but not in unfractionated cells from maternal blood or CD45⁻/CD14⁻ cells, paternal alleles could be detected. In the CD45⁻/CD71⁺ fraction, the relative frequency of paternal alleles compared with maternal alleles ranged from 1 in 20 to 1 in 200 (determined by titration and depending on the quality of separation and biological variation). In 7 out of 11 cases, between weeks 12 and 25 of gestation, we could identify paternal alleles by PCR, either HLA-DQ-A1 or D1S80. This double-MACS procedure is simple, fast, efficient, and reliable for non-invasive prenatal diagnosis.     

腐蚀对30CrMnSiNi2A钢结构疲劳寿命的影响

采用周期浸润加速腐蚀试验与疲劳试验相结合的方法,研究了腐蚀及腐蚀与疲劳交替作用对某型飞机30CrMnSiNi2A机翼主梁疲劳寿命的影响.结果表明,腐蚀环境的影响会引起30CrMnSiNi2A高强度结构钢的疲劳寿命明显降低.与未腐蚀状态相比,预腐蚀5、10、15天后,某型飞机机翼主梁模拟件的平均疲劳寿命分别下降了17.3%、20.5%、33.2%;而在腐蚀与疲劳交替作用下,其平均疲劳寿命下降了22.8%.在给定的腐蚀环境和疲劳载荷谱作用下,平均疲劳寿命N50随预腐蚀时间t的变化可以用N50=1044.541-219.978t描述.     

Repeat maternal serum testing in multiple marker down's syndrome screening programmes

The effect of repeat testing in maternal serum multiple marker screening for Down's syndrome was estimated using samples stored in an antenatal serum bank. Human chorionic gonadotropin (hCG) and unconjugated oestriol (uE₃) levels were determined in 142 pairs of routinely collected samples which had already been tested for alpha-fetoprotein (AFP). For each marker, about two-thirds of the pairs of values were within 20 per cent of each other and most were within 40 per cent. A multivariate Gaussian model was used to estimate the detection and false-positive rates for different repeat testing policies. A policy of repeat testing those with a high risk of a Down's syndrome term pregnancy given age and marker levels would reduce the false-positive rate but there would also be a reduction in the detection rate. For example, using all three markers and a 1 in 250 cut-off risk, the estimated false-positive rate would fall from 5·3 to 3·8 per cent but the detection rate would decrease from 58 to 55 per cent. A policy of repeating those with either high or borderline risks would produce a modest improvement in screening efficiency. Repeating the 11 per cent with a risk exceeding 1 in 500 yields an estimated false-positive rate of 5·0 per cent and a detection rate of 60 per cent. A policy of selective repeat testing is not recommended as it would not substantially improve screening efficiency. Nonetheless, if a repeat test has been performed, the parameters given in this paper will enable an unbiased estimate of the Down's syndrome risk to be calculated for individual women.     

Optimizing the configuration of a clearwell by integrating pilot and full-scale tracer testing

In this paper, the main factors impacting the plug flow pattern of a clearwell were investigated by integrating pilot-scale, full-scale clearwell tracer testing and computational fluid dynamics (CFD) simulation. It was found that pilot tracer testing, full-scale tracer testing and CFD simulation all demonstrated that the correlation between the ratio of t ₁₀/T and L/W can be approximately expressed by: t ₁₀/T = 0.189 4ln(L/W)-0.049 4. This study confirmed that the installation of baffles within clearwells is an efficient way to optimize their configuration. In addition, the inlet velocity has a minimal contribution to the ratio of t ₁₀/T. However, the ratio of turning channel width to channel width (d/W) significantly contributes to the ratio of t ₁₀/T. The optimal ratio of d/W is 0.8–1.2 for maintaining better plug flow pattern. The number of turning channels is one of the main factors that impact the ratio of t ₁₀/T. When increasing the number of turning channels, a lower ratio of t ₁₀/T is obtained.     

Repeat maternal serum testing for down's syndrome screening using multiple markers with special reference to free α and free β-hCG

To determine the effect of routine repeat testing in serum screening for Down's syndrome, we compared estimates of the detection and false-positive rates. Five serum markers were measured-alpha-fetoprotein (AFP), unconjugated oestriol (uE₃), human chorionic gonadotrophin (hCG), and its two subunits, free α and free β-hCG. First and repeat test marker levels were available from 142 women whose samples had been routinely collected and stored in an antenatal serum bank. Different repeat testing policies were compared for various combinations of the markers. If all women had repeat tests using the four markers AFP, uE₃, and free α and free β-hCG, the detection rate for a 5 per cent false-positive rate was 69 per cent compared with 65 per cent if no women were repeated. Policies of repeating selected women gave similar results. The small gain in screening performance with repeat testing performed routinely is not worthwhile. If a woman does happen to have a repeat test, her risk estimate should, however, be based on both results, not just the second.     

先进增强结构仿真分析与实验研究

目的研究先进增强结构受载条件下的应力分布特点。方法开展先进增强结构有限元仿真分析,模拟先进增强结构在单轴载荷作用下的应力应变特点,同时开展先进增强结构力学试验。试验以0.02 mm/s的速度匀速加载至20kN,采用应变检测方法获取先进增强结构复合材料结构和金属基体结构的应力应变大小,对比分析有限元和试验结果。结果先进增强结构有限元仿真分析结果和试验测试结果吻合度高,先进增强结构能降低金属基体结构的应力水平,降低程度约为15.8%。结论按照飞机高应力区结构特点和载荷分布特点,合理布置先进增强结构,减小局部区域的应力水平,提高该区域的疲劳和损伤容限性能。     

对高校思想政治教育队伍建设的几点思考

高校思想政治教育队伍建设是加强高校思想政治教育的组织保证.文章通过分析高校思想政治教育工作的特点,说明了加强高校思想政治教育队伍建设的必要性.并从加强高校思想政治教育队伍的思想建设、提高思想政治教育队伍的整体素质和加强高校思想政治教育队伍建设的科学研究和管理等三方面阐述了如何建设一支高素质的思想政治教育队伍.     

多环芳烃对海洋贝类多生物水平毒性效应的研究进展

多环芳烃类化合物(PAHs)是海洋中常见的一类持久性有机污染物,对海洋生态安全及海洋生物健康造成严重威胁。海洋贝类作为海洋生态毒理学研究的模式生物,其滤食性、固着性等生理特点使其对PAHs具有较高的生物蓄积能力,可以在不同生物水平产生一系列的毒性效应。本文综述目前PAHs在海洋贝类多种生物水平所造成的生物毒性效应及其检测方法的研究进展,重点从个体生理特征、组织结构、细胞毒性和基因毒性4个层次展开讨论,为更有效地利用海洋贝类这一模型生物,深入开展PAHs对海洋生物的致毒效应与机制研究提供思路与检测方法参考。     

Effects of skin and hydraulic fractures on SVE wells

Soil vapor extraction (SVE) systems are intended to cause substantial volumes of air to flow through the subsurface with the purpose of removing volatile contaminants. The effectiveness of SVE can be influenced by any effect that changes the specific gas capacity (discharge as a function of vacuum) of a well. Skins of low permeability material enveloping a well bore are widely recognized to affect the performance of wells used to recover water, natural gas, or petroleum, and skin can also significantly diminish the performance of an SVE well. Skins a few mm thick consisting of material whose gas phase permeability is 0.01 of the formation can reduce the specific gas capacity of an SVE well by factors of 2 to 10 or more. Hydraulic fractures created in the vicinities of shallow wells commonly resemble sand-filled layers shaped like flat-lying disks or gently dipping saucers. The contrast between the gas-phase permeability of the sand in the fracture and that of the formation is particularly important, with significant effects requiring the ratio to be greater than approximately 50. Shallow hydraulic fractures filled with several tenths of m3 of sand in formations that are several orders of magnitude less permeable than that of the enveloping formation should increase specific gas capacity by factors of 10 or more. Field tests of the effects of hydraulic fractures on the performance of SVE were conducted by creating four wells intersecting fractures and a suite of control wells created using conventional methods in silty saprolite. Specific gas capacities ranged over more than an order of magnitude for 10 wells completed within a small area (2 m2) and at the same depth. Specific capacities correlate to the drilling method that was used to create the bore for the well: lowest values occurred in wells drilled with a machine auger, slightly better results were obtained using a Shelby tube, and the best results were obtained from conventional wells bored with a hand auger. Skin factors determined for wells created with a machine auger could be explained by a layer 1 cm thick that has 0.007 times the permeability of the enveloping material, which could readily have been created during the drilling procedure. Specific capacities of wells intersecting hydraulic fractures were 5 to 100 times more than those of conventional wells. The large difference in performance appears to be due in part to the beneficial effects of the fracture, and in part to the detrimental effects of well skin.