Impact of posture and upper-limb muscle activity on grip strength

Purpose. The current research was carried out to determine grip strength (GS) with change in posture and upper-limb muscle activity of manual workers and investigate the impacts of these changes. Methods. For the current research, 120 male and 80 female participants were selected and GS was assessed using a digital hand grip dynamometer in various conditions. Results. The outcomes showed that male participants had higher GS as compared to female participants. Maximum GS was found in a standing posture with the fixed forward shoulder at 45°, elbow at 90° and a neutral position of the wrist and forearm for all participants. Conclusions. Higher values of GS were attained in standing postures which may result in attainment of higher performance levels by the workers. The outcomes justify the importance of correct postures during manual work in industries employing traditional methods.     

氢氟酸的污染与防治

综述氢氟酸烷基化装置，运行过程中氢氟酸的危害，污染源的分析，防治措施及取得效果．     

Acid Deposition in the Tuscan Appennines During the Dry Period 1988-89

The typical parameters of acid precipitation are evaluated in the forest of Vallombrosa (Tuscan Appennines) during the dry period 1988-89. Individual rain events (dry and wet deposition) were sampled in a clearing of the forest and below the canopy of an evergreen tree as well as a deciduous broadleaf tree.

In atmospheric precipitation the pH values usually vary around 4.4, with neutralization in the hot season due to calcareous material from distant sources. Relatively large concentrations of Pb and Cd are found in rain, but only in a small amount in canopy leachate. Aluminium, manganese and iron are more significantly washed off than Pb and Cd.     

淹水时间对土壤粘闭的影响

本文研究了植稻前淹水时间长短对土壤物理性质和粘闭作用的影响。结果表明,淹水可以显著地降低土壤强度,但土壤抗穿透力并不随淹水时间的延长而进一步明显下降;延长淹水时间,可以促进土壤粉粒和粘粒的分散,但土壤粘闭胼形成的有效粘闭层厚度以及粘闭后表层土壤强度的降低、主要受所使用的粘闭机具的影响,而与淹水时间的长短无关。因此,过分地延长淹水时间的措施,在生产实践上的意义并不大。     

外商投资的区位变动分析

文章利用1983—2000年的统计数据，通过比较分析方法，分析了我国外商投资区位的转移及其影响因素的变化，综合评价了我国中部5省、华东和西部的区位优势，提出了有利于吸引外商投资的建议。     

裂解温度和离子强度对不同来源生物炭胶体释放行为的影响

近年来环境中生物炭胶体形成受到广泛关注,它是生物炭在环境中物理分解作用的重要过程,对污染物迁移有着重要影响.然而,目前对生物炭胶体释放过程和影响因素的研究甚少,人们对生物炭胶体释放机理的认识还很有限.本研究以小麦秸秆和花生壳为生物质来源,系统地探讨了生物炭的裂解温度（300~700 ℃）和溶液离子强度（0.1~10 mmol·L^-1）对生物炭胶体产率的影响.结果表明,随着裂解温度的升高,生物炭的耐磨性增强,且在较高的裂解温度下（≥500 ℃）花生壳生物炭的耐磨性显著强于小麦秸秆生物炭.生物炭的胶体产率受到生物质来源和裂解温度的显著影响,花生壳生物炭的胶体产率低于小麦秸秆生物炭,高温裂解（≥600 ℃）生物炭的胶体产率显著低于中低温裂解生物炭.在相同溶液离子强度下,生物炭胶体产率与其亚微米级碎片率呈显著正相关（p<0.05）,即生物炭中亚微米级碎片率越高,生物炭胶体产率越高.当溶液离子强度从1 mmol·L^-1增加到10 mmol·L^-1时,两种来源生物炭的胶体产率均显著降低,其降低的程度因生物炭裂解温度而异,其中低温裂解（300 ℃）生物炭的胶体产率降低了11.1%~11.2%,中高温裂解（≥ 500 ℃）生物炭的胶体产率降低了60.0%~97.2%.     

Synergistic effects of Cu species and acidity of Cu-ZSM-5 on catalytic performance for selective catalytic oxidation of n-butylamine

In this work, a series of Cu-ZSM-5 catalysts with different SiO₂/Al₂O₃ ratios (25, 50, 100 and 200) were synthesized and investigated in n-butylamine catalytic degradation. The n-butylamine can be completely catalytic degradation at 350°C over all Cu-ZSM-5 catalysts. Moreover, Cu-ZSM-5 (25) exhibited the highest selectivity to N₂, exceeding 90% at 350°C. These samples were investigated in detail by several characterizations to illuminate the dependence of the catalytic performance on redox properties, Cu species, and acidity. The characterization results proved that the redox properties and chemisorption oxygen primarily affect n-butylamine conversion. N₂ selectivity was impacted by the Brønsted acidity and the isolated Cu²⁺ species. Meanwhile, the surface acid sites over Cu-ZSM-5 catalysts could influence the formation of Cu species. Furthermore, in situ diffuse reflectance infrared Fourier transform spectra was adopted to explore the reaction mechanism. The Cu-ZSM-5 catalysts are the most prospective catalysts for nitrogen-containing volatile organic compounds removal, and the results in this study could provide new insights into catalysts design for VOC catalytic oxidation.     

轻质高强多功能点阵夹层结构研究进展

根据材料类型和点阵结构,对点阵夹层结构进行了分类简述,并从静态、动态力学性能上,分析了各类点阵夹层结构的优缺点。简要叙述了设计过程中,综合考虑材料、结构以及功能等影响因素,针对不同使用工况的要求,可对各影响因素进行匹配设计,以实现传热特性、电磁波屏蔽特性、声学特性等不同的功能性需求。然后介绍了复合点阵夹层结构(嵌锁组装、模具热压成形、穿插编织)和金属点阵夹层结构(冲压成形、挤压线切割、拉伸网折叠、搭接拼装、熔模铸造以及增材制造)的主要制造工艺。最后提出如何将设计因子与多目标进行匹配及优化设计,是轻质高强点阵夹层结构的重点研究方向,轻质高强点阵夹层结构将朝多材料及多结构复合方向发展,开发新的制造工艺,提高费效比,是点阵夹层结构材料需解决的问题。     

某型飞机外翼5—8肋损伤原因分析及修复探讨

目的 分析某型飞机外翼5—8肋油箱区结构不同程度损伤的原因,制定修复方案。方法采用受载分析、有限元仿真计算、静力试验数据分析等强度计算方法分析损伤产生的原因,采用扫描电子显微镜和光学显微镜对磨痕形貌进行观测等失效分析,对损伤结构件开展失效模式分析,根据损伤原因及失效模式制定科学简便的修复方案,同时对损伤长桁采取的修补措施进行强度校核。结果 通过对外翼油箱充压破坏理论分析、有限元仿真计算、静力试验数据反推,并结合飞机实际损伤情况,得出油箱破坏理论分析危险薄弱部位与真实破坏情况一致的结论。有限元仿真计算最危险结构部位与实际结构首先发生破坏部位吻合,可作为深入制定修复方案及推测实际加载压力的依据。通过静力试验数据反推、结构实际损伤及有限元仿真计算结论得出,外翼5—8肋结构出现损伤时油箱施加压力约0.5 MPa,针对损伤制定了更换外翼油箱内部第5—8肋损伤结构和贴补加强损伤长桁的修理方案,经结构强度校核,满足设计要求。结论 分析认为外翼5—8肋油箱区结构损伤原因为油箱压力超过设计值导致结构过载断裂,采用贴补加强修理损伤长桁和更换第5—8肋损伤结构的修复方案能够满足强度设计要求,可指导同类飞机类似结构损伤故障的原因分析和修理,提醒同类飞机维修人员在飞机维护时应关注外翼油箱压力超压问题。     

Fractionation of Cu, Pb and Zn in certified reference soils SRM 2710 and SRM 2711 using the optimized BCR sequential extraction procedure

Sequential extraction of metals from solid media is a common analytical tool used in environmental and exploration geochemistry. A number of procedures exist, but without harmonization and standardization, meaningful comparisons are tenuous without baseline data. A newly developed, standardized sequential extraction procedure (optimized BCR) was applied to two contaminated certified reference soils from Montana, US (SRM 2710 and SRM 2711) for Cu, Pb and Zn. Four operationally defined fractions were isolated, acid extractable, reducible, oxidizable, and residual (by aqua regia). Fraction-specific concentrations, percentages and recoveries for Cu, Pb and Zn were used to explore differences between the optimized BCR procedure and three other sequential extraction schemes with published data for SRM 2710 and 2711 (i.e. Tessier scheme, Geological Survey of Canada scheme and the original BCR scheme). Results indicate significant differences between the four schemes, even for schemes that are closely associated (i.e. the original and optimized BCR schemes). Order-of-magnitude fraction-specific concentration differences were observed, especially for Pb in the reducible fraction. Differences between schemes are worrisome because trends varied between metals, between fractions and between reference soils. These data reinforce the need for increased adoption of standardized sequential extraction procedures and further examination of different solid media.