PbO_2复合电极预处理甲苯二胺废水

通过涂覆—热分解法与电沉积法制备了β-PbO_2/α-PbO_2/SnO_2-Sb2O3/Ti复合电极(PbO_2复合电极),采用X射线衍射(XRD)、扫描电子显微镜(SEM)、循环伏安法(CV)、线性极化法(LSV)和加速寿命试验对电极进行表征。将PbO_2复合电极用于处理甲苯二胺(TDA)废水,考察了电解质浓度、电流密度对TDA降解效果的影响。实验结果表明:α-PbO_2呈梭状,β-PbO_2呈花菜状,多层结构的PbO_2电极利于提高电极的稳定性和活性;PbO_2复合电极的析氧电位(1.9 V)明显高于TDA的氧化电位(1.28 V),其使用寿命长达486 d;在电流密度为60 m A/cm2、Na2SO4质量浓度为10 g/L、电解时间为240 min的条件下,对COD为4 791.74 mg/L、TDA质量浓度为486.4mg/L的废水进行处理,TDA去除率高达97.3%,COD去除率可达88.1%。     

一种包埋微生物复合填料的制备及性能评价

采用包埋法制备出一种复合生物填料，测其各项理化性质，并以NO。模拟废气验证其脱硝性能。填料主要由碳酸钙、牛粪堆肥腐殖质、菌剂载体、水泥、轻质珍珠岩、立体网状纤维及脱硝功能微生物等复合而成，粒径书12mm×20mm，自然堆积密度（471±0．8）kg／m2，持水量（49±1．3）％，比表面积3．91m2／g，平均机械强度（427．3±0．2）N，pH为10．5-0．2。填料能长期在潮湿环境中保持良好的粘结强度，并具有营养缓释及pH缓冲能力。包埋脱硝功能微生物复合填料中初期微生物数量5．3×10^5 CFU／g，运行60d后微生物数量达到8．6×10 8 CFU／g，闲置停运30d微生物有所减少，但重启后净化效率基本不变。当进气负荷低于I878mg／（13m3·h），气体停留时间为14．47s时，BF，的去除率高达93．15％。     

Revisiting the national corporate social responsibility index

This paper relies on Gjølberg’s national corporate social responsibility (CSR) index while its purpose is twofold. First, it seeks to extend the methodological instrument for assessing national CSR and, second, it applies the new approach to a much larger pool of countries (n = 86) in an attempt to provide a global CSR outlook. The emergent picture from the study is one of deficient CSR penetration and wide variation among countries where most of the assessed countries are still lagging in the endorsement of international CSR initiatives and schemes. Findings offer fertile ground to theorists and researchers for a deeper investigation of the national specificity of CSR and to further identify institutional determinants that shape the social responsiveness and self-regulation of business entities. The study has also implications for managers and top executives to consider as it infers that the national background can be influential in the development of a CSR agenda and can condition the level of CSR penetration.     

树脂固载纳米铁对偶氮染料直接湖蓝5B的脱色性能研究

以FeSO4和NaBH4水溶液为前驱溶剂,以聚苯乙烯型阳离子交换树脂为载体,制备了树脂固载的纳米铁,室温下用于对偶氮染料直接湖蓝5B水溶液进行脱色研究。研究结果发现,脱色反应遵循准一级反应动力学,在初始pH为3~10的范围内,反应进行14 m in时,50 mg/L的染料溶液脱色率均能达到83%以上。固载的纳米铁材料可多次重复利用,溶液中释放的铁离子浓度不超过0.1 mg/L。     

TiO2-Cu2O/蒙脱土复合光催化剂的制备与性能

以钠基蒙脱土（MMT）为载体，先采用溶胶-凝胶法将纳米TiO₂引入到MMT层间，再采用化学沉积法将纳米Cu₂O负载在TiO₂/MMT上，制备出TiO₂-Cu₂O/MMT纳米复合光催化剂。采用XRD、SEM、紫外-可见漫反射技术对催化剂进行了表征。以甲基橙为目标污染物，考察了催化剂的光催化性能。表征结果显示：TiO₂与Cu₂O均匀分布在MMT的表面与片层孔隙中;TiO₂-Cu₂O/MMT结合了TiO₂和Cu₂O的特性，拓宽了催化剂的光吸收范围。实验结果表明，在光源为可见光、初始甲基橙质量浓度为20 mg/L、光催化剂加入量为2 g/L的条件下，TiO₂-Cu₂O/MMT纳米复合光催化剂对甲基橙的光催化降解效果明显优于单一负载的Cu₂O/MMT和TiO₂/MMT，大幅提高了催化剂的光催化效率，反应300 min时TiO₂-Cu₂O/MMT对甲基橙溶液的脱色率达到93%。     

HZ-16型大孔树脂吸附处理含RDT-8废水

采用HZ-16型大孔树脂对含三（三溴苯氧基）三嗪（RDT-8）废水进行吸附及脱附处理。实验结果表明：在废水流量为4.0 BV/h的条件下，树脂最佳吸附工艺条件为出水体积88.0 BV，此条件下出水COD小于291 mg/L，挥发酚质量浓度小于0.08 mg/L；在脱附液流量为0.5 BV/h的条件下，树脂最佳脱附工艺条件为脱附液体积3.0 BV，此条件下脱附液中挥发酚质量浓度为30.6 mg/L，挥发酚脱附率高达76.4%。在最佳吸附-脱附工艺条件下，连续进行10次动态吸附-脱附实验，吸附出水中COD为137~294 mg/L，COD去除率为72.5%~89.1%，挥发酚质量浓度稳定在0.05 mg/L以下，挥发酚去除率为99.8%~100%，说明HZ-16型大孔树脂的吸附-脱附性能稳定。     

电解-水生植物-软隔离带复合技术治理重污染河流的中试研究

为了探索重污染河流的治理技术，2011年3月在无锡市新区鸿山镇徐塘桥河开展生态治理示范工程，通过电解技术、种植高等水生植物和构建软隔离带复合工程技术改善河流水质。实验结果表明，通过电解技术，可以迅速降低TP、氨氮（NH4＋-N）和COD；但较难减少TN。通过软隔离带可以有效隔离外源污染，在较短时间内改善河流TN、TP、COD的平均水平，但是难以提高河流的生态系统稳定性。电解能够有效的降解大分子有机物，为水生植物提供良好的生长环境，之后再种植水生植物，能够进一步降低的TN、TP。通过电解一水生植物一软隔离带复合技术不仅能够全面改善河流水质的平均水平，而且能够修复水生生态系统，提高生态系统稳定性。     

氨化松香基交联聚合树脂对水中诺氟沙星的吸附性能

将松香基功能高分子进行胺基化得到氨化松香基交联聚合树脂(aminated rosin-based resin,ARBR),采用扫描电镜(SEM)、红外光谱(FTIR)和比表面分析(BET)对ARBR进行了表征.利用ARBR树脂对水中诺氟沙星(NOR)吸附去除,系统研究了树脂投加量、pH值、接触时间、离子强度和温度等因素对NOR吸附性能的影响.结果表明,pH在2.0~6.0范围内,ABRA对NOR的去除效果随着溶液pH值的增加而升高,在8~10之间则呈现下降趋势;共存离子溶液的存在对ARBR去除NOR的行为总体上表现为促进作用.ARBR对水中诺氟沙星的吸附动力学过程符合准二级动力学模型.Langmuir等温吸附模型可较好地描述ARBR对水中NOR的吸附过程,理论最大吸附量为30.29 mg·g~(-1)(pH 6.0、20℃).吸附热力学分析表明,ARBR对水中诺氟沙星的吸附是自发吸热的过程,属于物理吸附,其吸附机制主要为氢键与静电作用.脱附再生实验发现,0.1 mol·L~(-1)HCl溶液效果明显优于其它脱附液,进一步确证了氢键在吸附中的主导作用;经过5次吸附-脱附循环后,对NOR仍具有稳定的吸附性能,可再生循环使用.对比了不同类型商品化树脂,ARBR具有较好的吸附效果.该研究结果拓展了松香高值化的应用研究领域,对开发松香在环境微污染控制中的应用具有理论指导意义.     

Pseudomonas sp. ZXY-1, a newly isolated and highly efficient atrazine-degrading bacterium, and optimization of biodegradation using response surface methodology

Atrazine, a widely used herbicide, is increasing the agricultural production effectively, while also causing great environmental concern. Efficient atrazine-degrading bacterium is necessary to removal atrazine rapidly to keep a safe environment. In the present study, a new atrazine-degrading strain ZXY-1, identified as Pseudomonas, was isolated. This new isolated strain has a strong ability to biodegrade atrazine with a high efficiency of 9.09 mg/L/hr.Temperature, p H, inoculum size and initial atrazine concentration were examined to further optimize the degradation of atrazine, and the synthetic effect of these factors were investigated by the response surface methodology. With a high quadratic polynomial mathematical model(R~2= 0.9821) being obtained, the highest biodegradation efficiency of 19.03 mg/L/hr was reached compared to previous reports under the optimal conditions(30.71°C, pH 7.14, 4.23%(V/V) inoculum size and 157.1 mg/L initial atrazine concentration).Overall, this study provided an efficient bacterium and approach that could be potentially useful for the bioremediation of wastewater containing atrazine.     

Removal of perfluorinated surfactants from wastewater by adsorption and ion exchange——Influence of material properties,sorption mechanism and modeling

Perfluorooctane sulfonate(PFOS) has attracted increasing concern in recent years due to its world-wide distribution, persistence, bioaccumulation and potential toxicity. The influence of sorbent properties on the adsorptive elimination of PFOS from wastewater by activated carbons, polymer adsorbents and anion exchange resins was investigated with regard to their isotherms and kinetics. The batch and column tests were combined with physicochemical characterization methods, e.g., N_2 physisorption, mercury porosimetry, infrared spectroscopy, differential scanning calorimetry, titrations, as well as modeling. Sorption kinetics was successfully modelled applying the linear driving force(LDF) approach for surface diffusion after introducing a load dependency of the mass transfer coefficient βs.The big difference in the initial mass transfer coefficient βs,0, when non-functionalized adsorbents and ion-exchange resins are compared, suggests that the presence of functional groups impedes the intraparticle mass transport. The more functional groups a resin possesses and the longer the alkyl moieties are the bigger is the decrease in sorption rate.But the selectivity for PFOS sorption is increasing when the character of the functional groups becomes more hydrophobic. Accordingly, ion exchange and hydrophobic interaction were found to be involved in the sorption processes on resins, while PFOS is only physisorptively bound to activated carbons and polymer adsorbents. In agreement with the different adsorption mechanisms, resins possess higher total sorption capacities than adsorbents. Hence, the latter ones are rendered more effective in PFOS elimination at concentrations in the low μg/L range, due to a less pronounced convex curvature of the sorption isotherm in this concentration range.