Vole response to unintentional changes in the chemistry of GM poplars

Summary.  There is an increased interest for the use of GM trees in forestry and several commercially promising lines are now available. However, the ecological implications of the use of GM trees, e.g. effects on non-target natural enemies, have rarely been explored. The aim of this study was to determine if modification of non-defensive traits in GM poplars unintentionally can influence plant chemistry in a way that has consequences for palatability to voles. In a greenhouse experiment, we used two lines, SPS33A and SPS26, of GM hybrid poplars (Populus tremula x tremuloides) with 1.5 and 4 times, respectively, over-expression sucrose-phosphate synthase (SPS). This enzyme plays a central role in sucrose synthesis, affecting cold acclimation, mesophyll sucrose content and biomass production. As a control we used the isogenic unmodified wild type. Stems of these poplars were presented to bank voles and field voles in cafeteria experiments. The concentration of condensed tannins was higher in leaves of lines SPS33A and SPS26 than in the isogenic wild-type and the concentration of nitrogen was higher in line SPS33A than in both the wild-type and line SPS26. Although the bank voles consumed slightly less bark from SPS33A, there were no significant differences in the preference of bank vole or field vole for the different poplar lines. This indicates that the changes in plant chemistry were insufficient to produce any strong herbivore response or that alteration in tannins and nitrogen counteracted each other. Still, changes in the interactions between mammalian herbivores and GM trees are important to consider in future cost-benefits analyses of GM trees.     

Contamination by chlorinated pesticides, PCBs and PBDEs in Atlantic spotted dolphin (Stenella frontalis) in western South Atlantic

Chlorinated pesticides, PCBs and PBDEs were analysed in nine blubber samples of Atlantic spotted dolphins, Stenella frontalis, incidentally captured during fishing operations in southern and southeastern Brazil between 2005 and 2007. The majority of compounds analysed were detected, suggesting widespread contamination over the region. Although the samples came from a location far from main coastal industrial areas, the results revealed an influence from such sources. Therefore, levels of PCBs (774-23 659 ng g⁻¹ lipid wt.) and PBDEs (23-1326 ng g⁻¹ lipid wt.) detected seem to be related to the movement of individuals throughout near-shore and offshore waters. The sample from a lactating female exhibited a lower level of contamination and a distinct pattern, indicating selective transfer favouring less lipophilic compounds.     

Henry's law constants of chlorinated solvents at elevated temperatures

Henry’s law constants for 12 chlorinated volatile organic compounds (CVOCs) were measured as a function of temperature ranging from 8 to 93 °C, using the modified equilibrium partitioning in closed system (EPICS) method. The chlorinated compounds include tetrachloroethylene, trichloroethylene, cis-1,2-dichloroethylene, vinyl chloride, 1,1,1-trichloroethane, 1,1-dichloroethane, 1,2-dichloroethane, chloroethane, carbon tetrachloride, chloroform, dichloromethane, and chloromethane. The variation in Henry’s constants for these compounds as a function of temperature ranged from around 3-fold (chloroethane) to 30-fold (1,2-dichloroethane). Aqueous solubilities of the pure compounds were measured over the temperature range of 8-75 °C. The temperature dependence of Henry’s constant was predicted using the ratio of pure vapor pressure to aqueous solubility, both of which are functions of temperature. The calculated Henry’s constants are in a reasonable agreement with the measured results. With the improved data on Henry’s law constants at high temperatures measured in this study, it will be possible to more accurately model subsurface remediation processes that operate near the boiling point of water.     

Critical Review of Environmental Forensic Techniques: Part I

A multitude of forensic techniques are available for age dating and source identification, including aerial photography interpretation, corrosion models, the commercial availability of a compound, chemical associations with discrete type processes, chemical profiling, degradation models and contaminant transport models. These techniques, however, are rarely challenged or discussed in the literature relative to the scrutiny encountered in environmental litigation. When introduced as scientific evidence, the governing assumptions and quality of the data are critically evaluated and frequently successfully challenged. The purpose of this paper is to review five types of forensic techniques and discuss their merits so that a user can decide which technique, or combination of techniques, is most appropriate for developing the technical portion of a case.     

Levels and isomer profiles of Dechlorane Plus in the surface soils from e-waste recycling areas and industrial areas in South China

Dechlorane Plus (DP) is a highly chlorinated flame retardant. Levels of DP were measured in surface soils from e-waste recycling areas and industrial areas in South China. Higher DP levels were found in e-waste recycling areas (undetectable-47.4 ng/g) than those in industrial areas (0.0336-4.65 ng/g) in South China. The highest DP concentration (3327 ng/g) was found at the e-waste recycling site in Qingyuan, while DP levels fell dramatically with increasing distance away from the recycling site, suggesting that the e-waste recycling activities are an important source of DP emissions. The mean ratios of anti-DP to total DP (f_anti) for different sampling areas ranged from 0.58 to 0.76 and showed no significant difference from the ratio for the technical DP products (t-test, p > 0.05). Further intensive studies are needed to investigate the process of DP degradation and its degradation products.     

Biodegradation and detoxification of olive mill wastewater by selected strains of the mushroom genera Ganoderma and Pleurotus

Thirty-nine white-rot fungi belonging to nine species of Agaricomycotina (Basidiomycota) were initially screened for their ability to decrease olive-mill wastewater (OMW) phenolics. Four strains of Ganoderma australe, Ganoderma carnosum, Pleurotus eryngii and Pleurotus ostreatus, were selected and further examined for key-aspects of the OMW biodegradation process. Fungal growth in OMW-containing batch cultures resulted in significant decolorization (by 40-46% and 60-65% for Ganoderma and Pleurotus spp. respectively) and reduction of phenolics (by 64-67% and 74-81% for Ganoderma and Pleurotus spp. respectively). COD decrease was less pronounced (12-29%). Cress-seeds germination increased by 30-40% when OMW was treated by Pleurotus strains. Toxicity expressed as inhibition of Aliivibrio fischeri luminescence was reduced in fungal-treated OMW samples by approximately 5-15 times compared to the control. As regards the pertinent enzyme activities, laccase and Mn-independent peroxidase were detected for Ganoderma spp. during the entire incubation period. In contrast, Pleurotus spp. did not exhibit any enzyme activities at early growth stages; instead, high laccase (five times greater than those of Ganoderma spp.) and Mn peroxidases activities were determined at the end of treatment. OMW decolorization by Ganoderma strains was strongly correlated to the reduction of phenolics, whereas P. eryngii laccase activity was correlated with the effluent’s decolorization.     

Batch reactor kinetic studies on the reductive dechlorination of chlorinated ethylenes by tetrakis-(4-sulfonatophenyl)porphyrin cobalt

Tetrakis-(4-sulfonatophenyl)porphyrin cobalt was identified as a highly-active reductive dechlorination catalyst for chlorinated ethylenes. Through batch reactor kinetic studies, degradation of chlorinated ethylenes proceeded in a step-wise fashion with the sequential replacement of Cl by H. For perchloroethylene (PCE) and trichloroethylene (TCE), the dechlorination products were quantified and the C₂ mass was accounted for. Degradation of the chlorinated ethylenes was found to be first-order in substrate. Dechlorination trials with increasing catalyst concentration showed a linearly increasing pseudo first-order rate constant which yielded rate laws for PCE and TCE degradation that are first-order in catalyst. The dechlorination activity of this catalyst was compared to that of another water-soluble cobalt porphyrin under the same reaction conditions and found to be comparable for PCE and TCE.     

毛细管色谱柱分离氯苯类化合物的优化

介绍了不同极性毛细管色谱柱分离11种氯苯类化合物的方法,通过实验证明,随着色谱柱极性的增加,11种化合物的分离得到改善,采用DB-5和AC-20双柱定性可以避免各种氯代物的干扰,达到准确定性的目的。     

Variations in expression of carbon isotope fractionation of chlorinated ethenes during biologically enhanced PCE dissolution close to a source zone

The stable carbon isotope values of tetrachloroethene (PCE) and its degradation products were monitored during studies of biologically enhanced dissolution of PCE dense nonaqueous phase liquid (DNAPL) to determine the effect of PCE dissolution on observed isotope values. The degradation of PCE was monitored in a 2-dimensional model aquifer and in a pilot test cell (PTC) at Dover Air Force Base, both with emplaced PCE DNAPL sources. Within the plume down gradient from the source, the isotopic fractionation of dissolved PCE and its degradation products were consistent with those observed in biodegradation laboratory studies. However, close to the source zone significant shifts in the isotope values of dissolved PCE were not observed in either the model aquifer or PTC due to the constant input of newly dissolved, non fractionated PCE, and the small isotopic fractionation associated with PCE reductive dechlorination by the mixed microbial culture used. Therefore the identification of reductive dechlorination in the presence of PCE DNAPL was based upon the appearance of daughter products and the isotope values of those daughter products. An isotope model was developed to simulate isotope values of PCE during the dissolution and degradation of PCE adjacent to a DNAPL source zone. With the exception of very high degradation rate constants (>1/day) stable carbon isotope values of PCE estimated by the model remained within error of the isotope value of the PCE DNAPL, consistent with measured isotope values in the model aquifer and in the PTC.     

Quantification of biotransformation of chlorinated hydrocarbons in a biostimulation study: added value via stable carbon isotope analysis

Stable carbon isotope analysis of chlorinated aliphatic compounds was performed at an in situ biostimulation pilot test area (PTA) at a site where 1,2-dichloroethane (1,2-DCA) and trichloroethene (TCE) were present in groundwater. Chlorinated products of TCE reductive dechlorination (cis-dichloroethene (cDCE) and vinyl chloride (VC)) were present at concentrations of 17.5 to 126.4 micromol/L. Ethene, a potential degradation product of both 1,2-DCA dihaloelimination and TCE reductive dechlorination was also present in the PTA. Emulsified soybean oil and lactate were added as electron donors to stimulate anaerobic dechlorination in the PTA. Stable carbon isotope analysis provided evidence that dechlorination was occurring in the PTA during biostimulation, and a means of monitoring changes in dechlorination efficiency over the 183 day monitoring period. Stable carbon isotope analysis was also used to determine if ethene production in the PTA was due to dechlorination of TCE, 1,2-DCA, or both. Fractionation factors (alpha) were determined in the laboratory during anaerobic biotransformation of 1,2-DCA via a dihaloelimination reaction in four separate enrichment cultures. These alpha values (as well as the previously published ranges of alpha for the dechlorination of TCE, cDCE and 1,2-DCA) were used, along with isotopic values measured during the pilot test, to derive quantitative estimates of biotransformation during the pilot test. Dechlorination was found to account for 10.7 to 35.9%, 21.9 to 74.9%, and 54.4 to 67.8% of 1,2-DCA, TCE and cDCE concentration loss respectively in the PTA. Stable carbon isotope analysis indicates that dechlorination of 1,2-DCA, TCE and cDCE were all significant processes during the pilot test, while ethene production during the pilot test was dominated by 1,2-DCA dihaloelimination. This study demonstrates how stable carbon isotope analysis can provide more conservative estimates of the extent of biotransformation than do conventional protocols. In addition, in a complex mixed plume such as this, compound specific isotope analysis is shown to be one of the few methods available for clarifying dominant biotransformation pathways where breakdown products are non-exclusive (i.e. ethene).