基于能值分析的武穴市耕地利用效益时空特征分析

开展耕地利用效益评价,对实现农业生态文明和耕地高效持续利用具有指导意义。结合能值分析、自相关等方法,评价和分析了2002~2011年武穴市耕地利用效益的时空演变特征。结果表明:近10a来武穴市耕地利用效益的能值投入和产出处于上升趋势,增长速度分别达58.17%和61.29%;能值投入中工业能值所占比重最大,超过总量的70%以上,2011年达到82.17%;耕地集约度增加6.60×1015sej的同时环境压力也在变大,耕地环境负载率由2002年的2.88上升至2011年的4.61;农业生产能力和农民生活水平不断提高;空间自相关结果显示武穴市各乡镇单位面积耕地能值投入和产出具有较明显的东高—南低—西平的聚集特征。研究结果对优化武穴市农业生产物化投入结构、提高产出效果,实现耕地高效持续利用具有一定的指导意义。     

滁州地区覆盖层厚度对场地地震动参数的影响

以滁州地区近百个钻孔资料为原型建立土层模型,采用一维频域等效线性化波动方法进行了土层地震反应分析,重点分析了覆盖层厚度对场地地震动参数的影响。研究结果表明,随着覆盖层厚度的增加,地表峰值加速度及土层放大系数逐渐增大,当覆盖层厚度超过一定值时,地表峰值加速度及土层放大系数呈逐渐缓慢减小的趋势;而反应谱特征周期总体上随着覆盖层厚度的增加而逐渐增大。     

江西钨矿周边土壤重金属生态风险评价:不同评价方法的比较

对江西省大余县某钨矿区周边的农田土壤进行调查分析,并采用不同的方法对土壤进行评价,结果表明,土壤As、Pb、Zn、Cu和Ni的含量范围分别为15.33—154.65 mg·kg-1、156.29—346.98 mg·kg-1、47.73—277.72 mg·kg-1、19.06—210.24 mg·kg-1和12.00—35.11 mg·kg-1,一些土壤样点的As、Pb、Zn和Cu含量已超过国家土壤环境质量二级标准.利用地累积指数法对土壤进行评价,结果表明土壤均受到As、Pb、Zn、Cu和Ni不同程度的污染;根据CPI(综合污染指数)评价标准,65.7%的土壤处于污染状态;利用TCLP法对土壤生态风险进行评价,结果显示所有土壤并未受到重金属的污染,以内梅罗综合污染指数法对土壤进行综合评价,结果表明该农田土壤重金属生态风险处于安全范围;以潜在生态危害指数法评价,发现Pb、As和Cu达到或超过中等生态风险的样点分别占37.14%、25.72%和2.86%,其他重金属污染风险均属轻微以下.不同评价方法得出的评价结果有差异,人们在评价重金属污染土壤时要根据评价的目的慎重选择合适的评价方法.     

Propagation and intensity of blast wave from hydrogen pipe rupture due to internal detonation

The coupled fluid-structure-rupture model was developed to study the propagation and intensity of blast wave from hydrogen pipe rupture due to internal detonation. The dynamic rupture of pipe and propagation of blast wave were well coupled together in every timestep during the simulation. The numerical model was validated with experiments in terms of both typical rupture profiles and blast overpressures. Results reveal that crack branching of pipe can dramatically increase the rupture opening rate which controls the intensity and shape of the resultant blast wave. Due to the process of crack initiation and extension, the blast wave out of the pipe first forms and then is strengthened by the subsequent compression waves. This makes the maximum peak overpressure appears at a certain standoff distance above the rupture. Despite consuming some percentages of energy, the dynamic rupture of pipe generally presents positive effects (up to 2–3 times) on the blast wave intensity along the jetting direction due to the convergence effect of rupture opening on the release of internal high-pressure gas. Finally, through defining normalized overpressure and impulse based on the same hydrogen detonation in open spaces, the quantitative influences of pipe rupture on the blast wave intensity in cases of different detonation pressures and standoff distances are clarified.     

Dynamic-risk-informed safety barrier management: An application to cost-effective barrier optimization based on data from multiple sources

An integrated approach for performance assessment and management of safety barriers in a systemic manner is needed concerning the prevention and mitigation of major accidents in chemical process industries. Particularly, the effects of safety barriers on system risk reduction should be assessed in a dynamic manner to support the decision-making on safety barrier establishments and improvements. A simulation approach, named Simulink-based Safety Barrier Modeling (SSBM), is proposed in this paper to conduct dynamic risk assessment of chemical facilities with the consideration of the degradation of safety barriers. The main functional features of the SSBM include i) the basic model structures of SSBM can be determined based on bow-tie diagrams, ii) multiple data (periodic proof test data, continuous condition-monitoring data, and accident precursor data) may be combined to update barrier failure probabilities and initiating event probabilities, iii) SSBM is able to handle uncertainty propagation in probabilistic risk assessment by using Monte Carlo simulations, and iv) cost-effectiveness analysis (CEA) and optimization algorithms are integrated to support the decision-making on safety barrier establishments and improvements. An illustrative case study is demonstrated to show the procedures of applying the SSBM on dynamic risk-informed safety barrier management and validate the feasibility of implementing the SSBM for cost-effective safety barrier optimization.     

Dynamic risk assessment for underground gas storage facilities based on Bayesian network

Loss of the underground gas storage process can have significant effects, and risk analysis is critical for maintaining the integrity of the underground gas storage process and reducing potential accidents. This paper focuses on the dynamic risk assessment method for the underground gas storage process. First, the underground gas storage process data is combined to create a database, and the fault tree of the underground gas storage facility is built by identifying the risk factors of the underground gas storage facility and mapping them into a Bayesian network. To eliminate the subjectivity in the process of determining the failure probability level of basic events, fuzzy numbers are introduced to determine the prior probability of the Bayesian network. Then, causal and diagnostic reasoning is performed on the Bayesian network to determine the failure level of the underground gas storage facilities. Based on the rate of change of prior and posterior probabilities, sensitivity and impact analysis are combined to determine the significant risk factors and possible failure paths. In addition, the time factor is introduced to build a dynamic Bayesian network to perform dynamic assessment and analysis of underground gas storage facilities. Finally, the dynamic risk assessment method is applied to underground gas storage facilities in depleted oil and gas reservoirs. A dynamic risk evaluation model for underground gas storage facilities is built to simulate and validate the dynamic risk evaluation method based on the Bayesian network. The results show that the proposed method has practical value for improving underground gas storage process safety.     

Influence of sewage culvert cover plate thickness on dynamic response and damage of the cover plate under gas explosion

In order to address the risk of combustible gas explosions in sewage culverts, a numerical model was established using ANSYS/LS-DYNA software. The model consisted of a culvert and a cover plate, and was used to study the effect of cover plate thickness (ranging from 0.08 m to 0.12 m) on the dynamic response and damage of the structure under explosive loads. The results indicated that, during the loading negative pressure stage, the equivalent stress peak value of the central monitoring unit of the cover plate first increased and then decreased with increasing cover plate thickness. Additionally, the maximum principal stress peak value first decreased and then increased, while the maximum shear stress peak value first increased and then decreased. During the loading positive pressure stage, the maximum principal strain peak value of the monitoring unit decreased overall with increasing cover plate thickness. However, the equivalent plastic strain peak value initially increased and then decreased gradually. The equivalent strain indicated that plastic damage occurred in the cover plate. Beyond a thickness of 0.11 m, increasing the cover thickness did not appear to enhance its resistance to plastic damage. The damage analysis revealed that as cover plate thickness increased, the peak displacement and velocity of the monitoring unit continued to decrease, while the overall stability and explosive resistance of the cover plate increased. Additionally, the number of damaged fragments decreased. However, once the cover plate thickness reached 0.11 m, the bonding performance of the reinforced concrete structure had been fully developed, increasing the thickness of the cover plate no longer had a significant impact on the explosive resistance of the cover plate.     

太原市污灌区农田土壤中多环芳烃污染特征及生态风险评价

通过对污灌区农田土壤多环芳烃(Polycyclic Aromatic Hydrocarbons,PAHs)的分布特征、污染程度及来源进行解析,深入了解污水灌溉引发的土壤污染问题,实现污水灌溉农田土壤的污染预警和科学合理利用.在太原污灌农田共采集110个土壤样品,使用气相色谱-质谱仪(Gas Chromatography...     

污泥基生物炭结构的共焦显微拉曼技术应用

采用共焦显微拉曼光谱仪探索不同热解温度(500~900)℃条件下所制备的污泥基生物炭结构变化的表征方法.结果表明,拉曼信号的荧光干扰与生物炭的理化特性有较强的相关性.随着热解温度升高,拉曼漂移系数减小,这与污泥基生物炭挥发分含量、H/C和O/C比变化趋势一致.其中,漂移系数与挥发分含量和H/C的相关性指数分别是0.97和0.94,其变化规律可用来准确评估生物炭挥发分含量和H/C的变化.同时,生物炭在拉曼光谱中的特征峰强度比D/G随着热解温度升高而增强,代表了污泥基生物炭无序化程度增加的过程.谷区域(V)与D峰强度比IV/ID随热解温度升高而减小,表明具有缺陷的稠合芳环结构的比例增加;另外,经分峰拟合后得到的ID1/IG1变化较小,而ID2/IG2呈增加趋势,证实了小分子侧链基团断裂形成的化合物部分沉积在炭表面,形成缺陷和非晶结构;IG1/IG2随着热解温度升高而减小,表明了炭基材料键角有序与无序比随着热解温度的升高而降低.因此,拉曼光谱可用于表征污泥基生物炭的微观结构变化,反映其结构演变规律.     

侵彻引信用磁电传感器的输出特性仿真分析

目的 解决侵彻引信用磁电传感器在不同侵彻环境下输出特性难以预知的问题,掌握不同结构参数对传感器输出的影响。方法 基于一种新型磁电传感器的结构原理,提出一种联合仿真研究方法,研究过程分为2部分,一部分是利用ADAMS软件进行磁电传感器惯性系统的力学特性仿真,另一部分是利用COMSOL软件进行传感器机电转换元件的磁电特性仿真,仿真模型的输入是战斗部在穿靶过程中的过载信息。通过磁电传感器在多次冲击加载试验中获取的实测数据,对仿真模型的仿真结果进行验证。改变仿真模型的相关参数,模拟并分析传感器结构对仿真输出特性的影响。结果 仿真穿靶时间的平均绝对误差约为138 μs,穿靶时刻仿真电压值的平均相对误差约为5.9%。在给定力学环境的前提下,侵彻引信用磁电传感器中的线圈与磁铁的相对高度会影响输出信号的正负、幅值以及波峰出现的时间,线圈匝数、线圈与磁铁之间的间隔仅对信号的幅值产生影响。结论 仿真误差在可控范围内,验证了联合仿真模型的正确性与该研究方法的可行性。该仿真模型可以为侵彻引信用磁电传感器的设计提供指导,并为后续进一步验证侵彻引信起爆控制系统的性能工作提供了新的思路。