Bending force prediction for dynamic roll-bending during 3-roller conical bending process

Cylindrical as well as conical cross-section structural parts are widely used in industrial applications worldwide. Such parts are produced from metal plates using many manufacturing methods. 3-roller conical bending process is one such process. In this process first the metal plates in specified blank shapes are given static bending in the rollers. Then the rollers are driven using motors for bending of the blanks under dynamic condition. During bending reaction forces will be there on the rollers. Forces acting on the rollers during the process are transmitted to the machine frame at the roller supports. In the paper an analytical model is developed for the prediction of force during the stage of dynamic bending. The model consists of various parameters like material parameters and geometrical parameters. Experimentation is carried out and the developed model is validated with the experimental results. Effects of various material and geometrical parameters are studied in the present paper. The present work can give insight in the process and can be helpful to the designers as well as to the researchers working in the area of metal forming.     

Microwave cladding: A new approach in surface engineering

Cladding is generally characterized by partial dilution of the substrate and hence formation of metallurgical bonding between the substrate and the deposits. Laser cladding is one of the most widely practiced surface engineering techniques. The present work mainly focuses on a novel development in surface engineering techniques in the form of microwave cladding. Clads of tungsten carbide (WC) based WC10Co2Ni powder on austenitic stainless steel were produced using microwave hybrid heating. Microwave clads were developed by exposing the preplaced, preheated powder for a duration of 120 s to microwave radiation at 2.45 GHz frequency and 900 W power in a home microwave system. Characterization of the clads was carried out in the form of microstructural and elemental composition studies. Investigations show crack-free interface revealing good metallurgical bond associated with partial dilution of the stainless steel substrate and full melting of WC particles. Typical X-ray diffraction results confirm presence of metallic carbides in the clad which is primarily responsible for significantly higher microhardness of the clad. Process mechanism has been discussed.     

动力风泵房循环水余热回收方案设计

介绍了动力风泵房每年有大量的工业余热为没经过处理直接排放,造成能源的浪费,以及其解决的思路:利用水源热泵吸收动力风泵房中产生的余热来加热水源,变成洗浴用水,从而达到节能减排的目的.     

A simulation study of mercury release fluxes from soils in wet-dry rotation environment

A simulative mesocosm study was conducted to evaluate the influence of wet-dry rotation on mercury（Hg） flux from soil/water to air and the distribution of Hg species in water as well as Hg chemical fractions in soil. Three types of soil were employed including two kinds of paddy soil, Typic Purpli-Udic Cambosols（TPUC） and Xanthi-Udic Ferralosols（XUF）, as well as the Alluvial Soil（AS） from Three Gorge reservoir area in Chongqing, China. The results showed that Hg fluxes in wetting periods were significantly higher than that in drying periods. It might be due to the formation of a layer of stable air over the water surface in which some redox reactions promote evasion processes over the water surface. This result indicated that more Hg would be evaporated from the Three Gorge reservoir and paddy soil field during the flooding season. Hg fluxes were positively correlated with air temperature and solar irradiation, while negatively correlated with air humidity and the electronic conductivity of water. Hg fluxes from AS and TPUC were significantly higher than that from XUF, which might be due to the higher organic matter（OM） contents in XUF than TPUC and AS. The reduction processes of oxidized Hg were restrained due to the strong binding of Hg to OM, resulting in the decrease in Hg flux from the soil.     

Development of a Dynamic Aquatic Model (DynA Model): Estimating Temporal Emissions of DDT to Lake Maggiore (N. Italy)

- DOI: http://dx.doi.org/10.1065/espr2006.01.009 Background, Aims and Scope Most existing models used to describe the fate of chemicals in surface water and sediment generally consider a 'static scenario', in which a contaminant is discharged at a constant rate and environmental input parameters do not change during the simulation time. This approach is not suitable in environmental scenarios characterized by daily or periodic changes of several input parameters. The aim of this study is to estimate approximate emissions of DDT lo Lake Maggiore using a new surface water model, (DynA Model) that describes the fate of a chemical in a dynamic scenario. Methods The model is developed on the grounds of an existing and validated model (QWASI). A numerical solution was adopted to build the fully dynamic version of the model. Results and Discussion The model was applied to Lake Maggiore emitting DDT at a constant rate until steady-state was reached. Emissions were stopped and later sporadic 'pulse' emissions were added. This was done to calculate the amount of DDT needed to simulate concentrations close to those measured in water and sediments. This allowed the evaluation of the order of magnitude of emissions. An uncertainty analysis for sediment resuspension was also performed, given the lack of measured resuspension rates. Conclusion The model showed the time response of the Lake Maggiore system to varying emission scenarios and provided what are regarded as reasonable estimates of DDT emissions. The model demonstrated the importance of sediment-water exchange. Recommendation and Outlook In order to better calculate DDT concentrations the model should be run with different discharge scenarios to clarify the time trends of concentrations, possibly with the use of different sets of measured data (such as biota and sediment deposition/resuspension rates).     

在役压力容器的动态检测技术与研究进展

根据笔者多年声发射检测与评价技术的研究成果并综合分析不同发展阶段的有关文献，论述了压力容器结构完整性检测与综合评估的意义，分析其合理性和难度，并对这种动态检测技术在评价压力容器结构完整性方面的研究进展作了较全面的评述     

围压作用下自振空化射流脉动特性实验研究

就围压下自振空化射流动压力特性进行了实验研究,其实验结果表明：在围压作用下,自振空化射流脉动幅度存在最优喷距,并且最优喷距随围压的增大而增大;在压降一定情况下,脉动幅度随围压的增加而减小;在围压和压降一定时,自振空化射流的最大冲击压力明显高于普通连续射流;自振空化射流的脉动频率,基本不随围压、压降和喷距的变化而变化,在本实验条件下,基本保持在１．３８ＫＨｚ 左右     

A STOCHASTIC DYNAMIC PROGRAMMING MODEL FOR THE OPTIMUM OPERATION OF A MULTI-PURPOSE RESERVOIR1

ABSTRACT: The main objective of this paper is to present a stockastic dynamic programming model useful in determining the optimal operating policy of a single multipurpose surface reservoir. It is the unreliability of forecasting the amount of future streamflow which makes the problem of a reservoir operation a stochastic process. In this paper the stochastic nature of the streamflow is taken into account by considering the correlation between the streamflows of each pair of consecutive time intervals. This interdependence is used to calculate the probability of transition from a given state and stage to its succeeding ones. A dynamic programming model with a physical equation and a stochastic recursive equation is developed to find the optimum operational policy. For illustrative purposes, the model is applied to a real surface water reservoir system.     

高等级公路车速管理研究

高等级公路交通事故中约 1/ 3与车速直接相关。为保证高等级公路行车安全 ,车速管理非常必要。从我国高等级公路管理现状出发 ,根据对我国高等级公路车辆实际运行特征和运行车速的实地调查 ,笔者对高等级公路车速限制的设定、发布及实施进行了研究 ,提出了应根据公路、交通、气象、历史事故数据等条件动态确定限制车速的概念 ,并就高等级公路车速管理的实施进行了探讨 ,重点强调了道路设计和交通安全文化建设在实施车速管理中的重要性。     

矿井外因火灾计算机控制及有待解决的若干问题

针对矿井外因火灾,评价了计算机技术在矿井火灾防治应用中的研究现状,阐述了发展矿井火灾计算机控制技术的重要意义及其应用前景。同时,指出了进一步发展矿井火灾计算机控制技术中有待解决的问题