皮革铬鞣废水回收利用中铬渣的铬量测定

本文研究了皮革铬鞣废水中铬的定性特征曲线。利用吸光度加合定律对大量实测数据进行统计处理。建立测定铬的实验室校准直线方程，相关系数γ＝０．９９６０．以此作为测定铬鞣废水及回收铬渣中铬量的实验室回归直线方程。并对本法的可靠性进行研究，结果令人满意。本法不仅大大简化了铬量测定的步骤．而且在提高分析效率的同时获得同等的检测结果。     

Pomegranate husk as an adsorbent in the removal of toxic chromium from wastewater

The use of a new sorbent developed from the husk of pomegranate, a famous fruit in Egypt, for the removal of toxic chromium from aqueous solution has been investigated. The batch experiment was conducted to determine the adsorption capacity of the pomegranate husk. The effects of initial metal concentration (25 and 50 mg l^-1), pH, contact time, and sorbent concentration (2-6 g l^-1) have been studied at room temperature. A strong dependence of the adsorption capacity on pH was observed, the capacity increased as the pH decreased, and the optimum pH value was pH 1.0. Adsorption equilibrium and kinetics were studied with different sorbent and metal concentrations. The adsorption process was fast, and equilibrium was reached within 3 h. The maximum removal was 100% for 25 mg l^-1 of Cr⁶⁺ concentration on 5 g l^-1 pomegranate husk concentration, and the maximum adsorption capacity was 10.59 mg g^-1. The kinetic data were analysed using various kinetic models—pseudo-first-order, pseudo-second-order, Elovich, and intraparticle diffusion equations—and the equilibrium data were tested using several isotherm models, Langmuir, Freundlich, Tempkin, Dubinin-Radushkevich, and Generalized isotherm equations. The Elovich and pseudo-second-order equations provided the greatest accuracy for the kinetic data, while Langmuir and Generalized isotherm models were the closest fit for the equilibrium data. The activation energy of sorption has also been evaluated as 0.236 and 0.707 kJ mol^-1 for 25 and 50 mg l^-1 chromium concentration, respectively.     

典型铬渣简易掩埋场铬渣及土壤铬污染特征和处置分析

通过钻孔采样分析,研究了典型铬渣简易掩埋场地下铬渣及土壤铬中Cr6 、总Cr的分布特征和污染状况,结果表明,铬渣简易掩埋场铬污染程度严重,引起了周边和地下深部较大面积的土壤污染,深度达到了地下的基岩.铬含量在土壤层剖面中分布呈现规律性变化,即随土壤深度增加,Cr6 、总Cr含量逐渐下降,但绝大多数超过了危险废物毒性鉴别标准.从铬污染程度上看,总体上存在铬渣>土壤>人工填土.在此基础上,提出了铬渣及污染土壤的处置方式,为铬渣污染治理和资源化利用提供科学依据.     

铬渣中铬的浸出行为

采用BCR法连续浸提研究铬渣中铬的存在形态,结果表明:铬渣中总铬和六价铬主要以残渣态和可氧化态形式存在;通过铬渣动态连续浸提实验与静态浸提实验研究了浸提剂和活性炭对铬渣中铬浸出行为的影响,研究发现p H值为3.1的醋酸浸提剂浸出液中铬浓度最低,且添加活性炭后的静态浸出液中铬的浓度有不同程度降低。     

Simultaneous photocatalytic treatment of Cr(VI), Ni(II) and SDBS in aqueous solutions: Evaluation of removal efficiency and energy consumption

Simultaneous photocatalytic reduction of poisonous Cr(VI) and Ni(II) ions, coupled with photocatalytic oxidation of sodium dodecyl benzene sulfonate (SDBS) were studied with a trace amount of commercial titania nanoparticles and by means of a direct-photo-irradiation reactor. The co-presence of metal ions and SDBS causes metal ions reduction as well as SDBS oxidation to enhance and energy efficiency to improve. XRD, XPS and FTIR analysis were used to characterize TiO₂ particles before and after usage with the aim of evaluating the mechanism of reactions. The effect of major operating parameters, pH and temperature, was investigated. Under conditions of [Cr(VI)]₀ = [Ni(II)]₀ = 5 mg/L, [SDBS]₀ = 10 mg/L, [TiO₂] = 40 mg/L, pH 6 and T = 35 °C; the removal efficiencies of 55.4%, 71.2% and 57.2% were obtained, respectively, for Cr(VI) and Ni(II) reduction, as well as for SDBS oxidation, after 110 min operation. The relevant kinetic model jointed with the Arrhenius equation was introduced. Pseudo-first-order reactions are relevant. Energy consumption (electrical and thermal) evaluations revealed that operations at higher temperatures provide significant cost reduction. Meantime, a criterion was proposed for a consistent assessment of this kind of processes.     

运行参数对水蚯蚓生物吸持六价铬性能影响研究

水蚯蚓能通过摄食剩余污泥而使污泥减量,但剩余污泥中常含有各种重金属污染物.本文以颤蚓科蠕虫(Tubificidae)为研究对象,以六价铬为典型重金属污染物,考察运行工艺参数:初始铬浓度、p H、水蚯蚓投加量和温度对水蚯蚓吸持六价铬的影响.实验结果表明,在研究浓度范围内(0.1~8.0 mg·L-1),水蚯蚓对六价铬的吸持速率随铬浓度的增大而加快,单位质量吸持量从14.4 mg·kg-1(以干重计,下同)增加到312.7 mg·kg-1,但六价铬的吸持率却随Cr6+初始浓度的增加而降低;p H从6.0增加到8.0,水蚯蚓对六价铬的吸持速率随p H的上升而提高,吸持率和单位质量吸持量先明显增强,p H达到7.5后逐渐趋于平衡,即吸持最佳p H为7.5;水蚯蚓投加量从1.0 g(以湿重计,下同)增加到5.0 g时,吸持速率及吸持率均上升,但单位质量吸持量却随着水蚯蚓投加量的增加而减少;当温度在10~20℃范围内时,水蚯蚓对六价铬的吸持速率相对较慢,到25℃时,吸持速率明显加快,吸持率和单位质量水蚯蚓的吸持量的变化趋势与吸持速率的变化相一致,但当温度达到30℃,水蚯蚓会大量死亡,综合考虑,处理系统最佳温度宜控制在25℃.     

Removal of Cr(VI) from Cr-contaminated groundwater through electrochemical addition of Fe(II)

The conventional chemical reduction-precipitation technique in the removal of Cr(VI) from contaminated groundwater involves a two-step process whereby Cr(VI) is first reduced to Cr(III) at an acidic pH by a reducing agent and in a subsequent step, Cr(III) is precipitated as insoluble hydroxide at an alkaline pH. In a variation of this method, Fe(II) is added electrochemically to the Cr(VI) containing water. From a pure iron electrode, Fe(2+) ions are released into the solution and bring forth the reduction of Cr(VI). At the cathode, H(2)O is reduced whereby the OH(-) ions entering the solution keep the pH of the solution in the alkaline range. This latter fact greatly facilitates simultaneous reduction of Cr(VI) to Cr(III) and co-precipitation of hydroxides of trivalent Cr and Fe. On the basis of a set of experimental data, it is shown that this process is both thermodynamically and kinetically efficient, meaning, with the electrochemical method, rapid and nearly complete removal of Cr(VI) from a groundwater source with both high and low levels of Cr-contamination can be achieved. These factors make the electrochemical process superior to the conventional chemical process in remediation of Cr-contaminated groundwater.     

基于形态与in vitro方法的铬污染土壤生物可给性研究

铬（Cr）是电镀类场地的主要污染物.开展土壤中Cr（III）和Cr（VI）的生物可给性研究对于准确评估Cr污染场地风险,克服污染场地过度修复问题十分关键.本研究采集我国栗钙土、红壤、潮土3种典型土壤,通过添加相同浓度污染物的方式制备成Cr（III）或Cr（VI）污染土壤.随后利用5种体外方法（in vitro）,对3种土壤经口摄入的Cr生物可给性进行比较与健康风险评估.进而从土壤理化性质、Cr赋存形态、土壤矿物组成方面,对不同土壤在溶解度生物可给性研究联盟（SBRC）方法中的生物可给性差异进行分析.结果表明,基于生物可给性的Cr污染土壤健康风险评估能够显著降低风险水平,提高风险控制值,其中,SBRC方法在评估中更具有保守性.3种土壤在相同的Cr（III）和Cr（VI）污染浓度下,栗钙土相较于红壤和潮土在肠期具有更高的生物可给性和健康风险.此外,土壤黏粒、有机质含量及迁移系数能够影响土壤Cr的生物可给性,土壤矿物种类赋存不同也是造成Cr（III）和Cr（VI）在不同土壤中生物可给性差异的重要因素.     

利用含铬废水和含铅废水制备铬黄

利用净化后的含铬废水和含铅废水制备铬黄.采用沉淀法对废水进行净化预处理,最佳工艺条件:100mL含铬废水中加入20 g Na_2CO_3,及10 mL H_2O_2,用NaOH调节含铬废水pH为10.00;用NaOH调节含铅废水pH为2.65.将净化后的10 mL含铬废水和25 mL含铅废水混合,在55-60℃条件下反应10 min,合成的铬黄达到GB/T 3184-2008<铬酸铅颜料和钼铬酸铅颜料>的质量标准.经重金属吸附剂处理Pb~(2+)后铬黄合成滤液中的Cr~(6+)和Pb~(2+)质量浓度均达到GB8978-1996<污水综合排放标准>的指标.