Estimation and characterization of PCDD/Fs and dioxin-like PCBs from Chinese iron foundries

The iron foundry industry is considered to be a potential source of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). This study investigated the emission factors and total emission amounts of PCDD/Fs and dioxin-like polychlorinated biphenyls (DL-PCBs) from iron foundries in China. The concentrations and the World Health Organization toxicity equivalents (WHO-TEQs) are presented and the congener profiles are discussed in this paper.In the present work, 26 fly ash samples were collected and tested to quantify the PCDD/Fs and DL-PCBs generated by 14 plants of different scales, and five stack gas samples were collected from two (named as EFG and LFG) of those plants. The emission levels of PCDD/Fs and DL-PCBs indicated that hot-air cupolas had lower emissions than cold-air cupolas. When iron ore lump and sinter were used as raw material, the emission factors were about 250 ng TEQ t⁻¹ of product. However, if the raw material was scrap, the emission factors varied owing to the different contents of organic materials in the raw materials. It was found that the mean WHO-TEQ values of PCDD/Fs and DL-PCBs were 144 and 34.2 pg Nm⁻³ in stack gas and 20.0 and 1.58 pg g⁻¹ in fly ash. In multiple tests, it was estimated that the mean emission factors of PCDD/Fs and DL-PCBs were 365 and 10.9 ng WHO-TEQ t⁻¹ released to residue and 2719 and 555 ng TEQ t⁻¹ released to air. The total emission amounts of PCDD/Fs and DL-PCBs from Chinese iron foundries with cupola furnaces released to residue and air were 16.8 and 146 g WHO-TEQ in 2008, respectively.     

Effect of steam hydration on performance of lime sorbent for CO2 capture

Lime is considered a feasible sorbent for the capture of CO₂ from large stationary sources. The positive attributes of a natural source material, low cost and lack of harmful by-products are offset by rapid deterioration in performance and high regeneration temperature. Performance can be improved by hydrating the lime using steam. We investigate a steam hydration process wherein lime is hydrated for 5 min at 300 °C and atmospheric pressure in a mixture of steam and CO₂. The experiments consisted of 10 capture cycles with 60% of the lime active at the end. Extrapolation using a decay model suggests a residual carbonation level of 48%, significantly higher than the 8% achieved by dry lime cycles. The cost of replacement sorbent under these conditions is less than $1/t of CO₂ captured. The hydrated lime process also reduces the thermal load, for heating and cooling, by half as well as the inventory, and therefore solids handling, by a factor 5 over dry lime. The introduction of the hydration reaction provides another exothermic reaction for heat management.     

US army land condition-trend analysis (LCTA) program

The US Army Land Condition-Trend Analysis (LCTA) program is a standardized method of data collection, analysis, and reporting designed to meet multiple goals and objectives. The method utilizes vascular plant inventories, permanent field plot data, and wildlife inventories. Vascular plant inventories are used for environmental documentation, training of personnel, species identification during LCTA implementation, and as a survey for state and federal endangered or threatened species. The permanent field plot data documents the vegetational, edaphic, topographic, and disturbance characteristics of the installation. Inventory plots are allocated in a stratified random fashion across the installation utilizing a geographic information system that integrates satellite imagery and soil survey information. Ground cover, canopy cover, woody plant density, slope length, slope gradient, soil information, and disturbance data are collected at each plot. Plot data are used to: (1) describe plant communities, (2) characterize wildlife and threatened and endangered species habitat, (3) document amount and kind of military and nonmilitary disturbance, (4) determine the impact of military training on vegetation and soil resources, (5) estimate soil erosion potential, (6) classify land as to the kind and amount of use it can support, (7) determine allowable use estimates for tracked vehicle training, (8) document concealment resources, (9) identify lands that require restoration and evaluate the effectiveness of restorative techniques, and (10) evaluate potential acquisition property. Wildlife inventories survey small and midsize mammals, birds, bats, amphibians, and reptiles. Data from these surveys can be used for environmental documentation, to identify state and federal endangered and threatened species, and to evaluate the impact of military activities on wildlife populations. Short- and long-term monitoring of permanent field plots is used to evaluate and adjust land management decisions.     

Estimation of heavy metal emission fluxes on the territory of the NIS

As the result of our research, the specific procedures to use emission factor methodology were developed and applied for trace metal emission evaluation into the atmosphere over the territory of the former Soviet Union. The existing data on heavy metal emissions were revised as background information from official sources and expert estimations. Source categories and different initial information as well as the concept of spatial emission distribution were defined and observed. The calculated atmospheric emissions of lead, cadmium and mercury were produced among the main source categories of 12 NIS countries for 1990, 1995 and 1997, using modified emission coefficients.Total cadmium emissions into the atmosphere from determined source categories were estimated as 388.4 tonnes in 1990 for the whole domain with reduction by up to 207.0 tonnes per year for 1997. Mercury emissions were estimated as equal to 303.2 tonnes in 1990 and 159.8 tonnes in 1997. Lead emission amounted to 24903.0 tonnes in 1990, and 9652.5 tonnes in 1997.The results of the evaluation demonstrated the general trends of atmospheric heavy metal emissions with a greater decrease during the first half of the 1990s followed later by the rather stable level to be explained by recession in industrial activity and fuel consumption in NIS in that period. The significant spatial variations of atmospheric emissions over vast territories are described based on the results of their distribution according to 1×1 degree grid with remarkably higher values in the location of industrial cities.     

Inducing pollution prevention adoption: effectiveness of the 33/50 voluntary environmental program

The Environmental Protection Agency has encouraged voluntary efforts at pollution prevention by facilities through participation in voluntary environmental programs (VEPs) such as the 33/50 program to reduce toxic releases. This paper examines the effectiveness of the 33/50 program in the adoption of pollution prevention practices and disentangles the effect of adoption from that of program participation on releases of 33/50 chemicals. Using facility-specific panel data and controlling for the endogeneity of program participation and pollution prevention adoption, we find that program participants were 38% more likely to adopt pollution prevention practices than non-participants. Program participants who adopted pollution prevention practices reduced their 33/50 releases by 52% compared to facilities that neither participated nor adopted pollution prevention. This indicates that VEPs that emphasize pollution prevention can play a complementary role in reducing toxic releases.     

Theory of storage,inventory and volatility in the LME base metals

The theory of storage, as related to commodities, makes two predictions involving the quantity of the commodity held in inventory. When inventory is low (i.e. a situation of scarcity), spot prices will exceed futures prices, and spot price volatility will exceed futures price volatility. Conversely, during periods of no scarcity, both spot prices and spot price volatility will remain relatively subdued. We test these predictions for the six base metals traded on the London Metal Exchange (aluminium, copper, lead, nickel, tin and zinc), and find strong validation for the theory. Including Chinese inventories reported by the Shanghai Futures Exchange strengthens the relationship further. We also introduce the concepts of excess volatility, inventory-implied spot price and inventory-implied spot volatility and illustrate some applications.     

Estimation of vegetative mercury emissions in China

Vegetative mercury emissions were estimated within the framework of Biogenic Emission Inventory System (BEIS3 V3.11). In this estimation, the 19 categories of U.S. Geological Survey landcover data were incorporated to generate the vegetation-specific mercury emissions in a 81-km Lambert Conformal model grid covering the total Chinese continent. The surface temperature and cloud-corrected solar radiation from a Mesoscale Meteorological model (MM5) were retrieved and used for calculating the diurnal variation...     

Environmental sustainability and the integration of different methods for its assessment

The aim of this paper is to propose a research framework, based on the joint use of three widely used methods: EMergy Evaluation (EME), Ecological Footprint Analysis (EFA) and Greenhouse Gas Inventory (GHGI), that are applied to assess the environmental sustainability of a region. The results of application of these methods to several Italian Provinces enabled us to compare their sustainability, and to test the methods with respect to sustainability requirements at local and global level. The outcomes suggest that the proposed framework provides an organic evaluation of regional systems based on key aspects, such as resources depletion, consumption patterns, waste production and absorption.     

A multi-echelon supply chain model for municipal solid waste management system

In this paper, a multi-echelon multi-period solid waste management system (MSWM) was developed by inoculating with multi-echelon supply chain. Waste managers, suppliers, industries and distributors could be engaged in joint strategic planning and operational execution. The principal of MSWM system is interactive planning of transportation and inventory for each organization in waste collection, delivery and disposal. An efficient inventory management plan for MSWM would lead to optimized productivity levels under available capacities (e.g., transportation and operational capacities). The applicability of the proposed system was illustrated by a case with three cities, one distribution and two waste disposal facilities. Solutions of the decision variable values under different significant levels indicate a consistent trend. With an increased significant level, the total generated waste would be decreased, and the total transported waste through distribution center to waste to energy and landfill would be decreased as well.     

西安市工业燃煤汞排放清单

依据燃煤汞含量、燃煤汞排放因子和西安市工业行业燃煤消费量建立西安市燃煤大气汞排放清单。2003年西安市工业燃煤汞大气排放量为0.33t,热电厂、化学品制造和造纸业是燃煤汞大气排放的最主要行业,其中热电厂占42.0%。排放清单的建立为西安市制定燃煤大气汞污染调控措施和评价燃煤汞污染的环境风险提供了科学的基础依据。