横通道通风对隧道火灾烟气蔓延影响的数值模拟研究

为探究隧道横通道通风对隧道火灾烟气蔓延的影响规律,使用火灾动力学模拟软件FDS,对不同火源位置的横通道临界风速、主隧道温度分布以及烟气层高度进行研究。研究结果表明：在一定火源功率范围内,隧道横通道临界风速与火源功率的1/3次方成正比且火源距横通道越远,临界风速越小;当火源位于交叉口,横通道使用临界风速通风时,隧道内烟气温度明显降低,烟气迅速沉降到2 m以下;当火源距离交叉口10,20 m,横通道通风会加快火源下游烟气沉降,烟气沉降速度随横通道通风速率的增大而增大;当火源位于交叉口时,烟气沉降由横通道通风对烟气的降温作用和涡旋作用共同主导,当火源位于距离交叉口10,20 m时,烟气沉降主要由涡旋作用主导。     

Research based on double coverage rate and reliability of gas detector layout optimization

The gas detector layout should be highly attuned to combustible gas leakage and attain a good reliability in avoiding detector malfunction, which is an important guarantee for the normal production of the chemical industry and other related enterprises. Herein, a gas detector layout optimization method based on double coverage and reliability is proposed. The key gas leakage monitoring area is determined through layout scene field investigation. To improve the detection probability and detection system reliability, the dual coverage target and voting mechanism are set, and the gas detector layout is determined with the ray-casting algorithm according to the coverage target. Combined with FLACS software to simulate a variety of typical leakage conditions under different layout scenarios, the relationship between the leaked gas concentration detected by gas detectors in each layout scheme and time is obtained, and the gas leakage detection probability in each layout scheme, number of detectors that can trigger the alarm, shortest time to trigger the alarm and reliability are comprehensively evaluated. The decision-maker selects the final gas detector layout plan according to the evaluation results and actual site needs. The study shows that the detection probability of each layout scheme set according to the double coverage is high, and multiple detectors can trigger the alarm (up to 100%), which ensures that the alarm can be triggered within 10 s under all applicable conditions. According to the evaluation results, the decision-maker can obtain a layout scheme that not only agrees with the actual site conditions but also attains a high detection probability, short detection time and strong reliability.     

综合管廊内火灾自动报警探测器实验研究

为了能够有效提升综合管廊内火灾自动报警系统的准确性和可靠性,本文采用火灾实体试验的方法,通过对各类型火灾自动报警探测器响应时间的情况进行分析和比较,研究综合管廊电力舱内常用探测器的性能。研究结果表明:接触式缆式线型感温火灾探测器可以较早的探测到电缆温度异常变化的现象,可用于早期预警。点型感烟探测器对烟粒子浓度较为敏感,可用于综合管廊电力舱室的空间探测。分布式光纤型感温火灾探测器对明火温度的变化较为敏感,作为空间型的火灾探测器比较可靠。     

隧道与横通道交叉角对火灾烟气蔓延影响机制研究

为探索隧道与横通道交叉角对火灾烟气蔓延的影响机制,采用FDS数值模拟,研究横通道与隧道不同交叉角情况下火灾烟气温度、浓度、烟气层高度等的变化规律,建立开启火源下风向横通道时隧道内烟气最高温度修正公式,提出烟气纵向蔓延恢复长度的概念,并探讨其影响规律。 结果表明:隧道和横通道交叉角越小,隧道内同一位置烟气层高度越高,当交叉角由90°降低到30°时,烟气层高度最大增加32%;烟气纵向蔓延恢复长度与交叉角及通风速率呈正相关,而与火源功率几乎无关。研究结果对隧道通风排烟系统设计及相关标准的制定具有参考意义。     

矿井巷道火灾烟流逆退数值模拟及临界风速研究

为了研究矿井发生火灾后高温烟流的蔓延规律及影响因素,利用COMSOL软件对火区进行数值模拟,建立巷道三维模型,得到火区风流速度与温度分布。通过改变边界条件,分析火风压作用下,火区烟气在不同控制风速、巷道条件作用下蔓延规律,得出不同因素与临界风速的关系,为选取合理的火灾控制风速提供理论依据。研究结果表明:火源温度一定时,巷道入口风速越低,火源下风侧高温烟流越靠近巷道顶部,随着风速增大,向巷道下部蔓延;风速较低时,在火区火风压的作用下,会产生烟流逆退现象,随着风速的增大,逆流层长度和厚度随之减小;巷道入口通风条件不变时,火区温度越高越容易产生烟流的逆退,影响范围越大;巷道高度越高、上行风坡度越小,越易发生逆退现象;不同影响因素与巷道平均温度不成正比关系,其中下行风坡度5~15°时巷道平均温度较高且易于发生烟流滚退现象,影响范围较大;火源温度、巷道条件与临界风速的数据拟合结果对预测巷道的临界风速有较好的参考价值。     

环境风作用下弧形立面机场航站楼自然排烟效果的数值模拟研究

机场航站楼公共区域多采用自然排烟方式,而环境风和排烟窗控制模式会影响排烟效果,尤其在弧形立面航站楼中影响效果显著。以某弧形立面航站楼为研究对象,选取候机指廊弧形区域的自然排烟窗分3段控制启闭,进而确定6种控制模式,采用 FDS火灾动力学模拟软件研究了不同模式下的排烟效果,获得了环境风和发烟量对危险到达时间的影响规律, 提出了排烟窗控制模式流程。结果表明:对于弧形立面航站楼而言,排烟窗分段控制模式下的排烟效果优于不分段控制模式,可以有效降低环境风对自然排烟的影响。当环境风速超过10 m/s时,须关闭迎风向排烟窗,避免烟气倒灌。在法向环境风作用的不利条件下,当发烟量在0. 05~0. 20之间时,危险到达时间的最大值tmax与发烟量x满足一次函数关系式:tmax=-3018x+1030.5。     

通风口高度对太阳能烟囱建筑自然通风和自然排烟性能的影响研究

安装太阳能烟囱后的建筑具有效果优良、节能环保的自然通风系统。室内通风口高度是太阳能烟囱建筑性能的关键参数之一。提出通过改变太阳能烟囱建筑室内通风口高度位置,使太阳能烟囱既可用于建筑的日常自然通风,也能实现室内火灾场景下的自然排烟。利用缩比例实验台研究了不同室内通风口高度对太阳能烟囱建筑自然通风与自然排烟效果的影响,发现自然通风和自然排烟效果随通风口高度增加呈现先增大后减小的趋势,且最佳室内通风口高度位于窗户上檐位置附近。研究结果对太阳能烟囱建筑的建筑结构关键参数设计具有指导意义。     

Optimization-Based Atmospheric Plume Source Identification

This work applies optimization and an Eulerian inversion approach presented by Bagtzoglou and Baun in 2005 in order to reconstruct contaminant plume time histories and to identify the likely source of atmospheric contamination using data from a real test site for the first time. Present-day distribution of an atmospheric contaminant plume as well as data points reflecting the plume history allow the reconstruction and provide the plume velocity, distribution, and probable source. The method was tested to a hypothetical case and with data from the Forest Atmosphere Transfer and Storage (FACTS) experiment in the Duke experimental forest site. In the scenarios presented herein, as well as in numerous cases tested for verification purposes, the model conserved mass, successfully located the peak of the plume, and managed to capture the motion of the plume well but underestimated the contaminant peak.     

集中排烟公路隧道入口段火灾下诱导风速研究

为研究集中排烟模式下公路隧道入口段发生火灾时的合理诱导风速,以某公路隧道为背景,运用火灾动力学模拟软件FDS对隧道人口段火灾时不同坡度、不同诱导风速的16组火灾工况进行模拟研究,通过对各工况下隧道内的温度场分布及烟气控制效果模拟结果的分析,得到了各工况下的合理诱导风速,研究结果可为公路隧道集中排烟系统关键设计参数提供参考.     

A method for determining the analytical form of a radionuclide depth distribution using multiple gamma spectrometry measurements

When characterizing environmental radioactivity, whether in the soil or within concrete building structures undergoing remediation or decommissioning, it is highly desirable to know the radionuclide depth distribution. This is typically modeled using continuous analytical expressions, whose forms are believed to best represent the true source distributions. In situ gamma ray spectroscopic measurements are combined with these models to fully describe the source. Currently, the choice of analytical expressions is based upon prior experimental core sampling results at similar locations, any known site history, or radionuclide transport models. This paper presents a method, employing multiple in situ measurements at a single site, for determining the analytical form that best represents the true depth distribution present. The measurements can be made using a variety of geometries, each of which has a different sensitivity variation with source spatial distribution. Using non-linear least squares numerical optimization methods, the results can be fit to a collection of analytical models and the parameters of each model determined. The analytical expression that results in the fit with the lowest residual is selected as the most accurate representation. A cursory examination is made of the effects of measurement errors on the method.