Electrochemical treatment of olive mill wastewater: Treatment extent and effluent phenolic compounds monitoring using some uncommon analytical tools

Problems related with industrials effluents can be divided in two parts: (1) their toxicity associated to their chemical content which should be removed before discharging the wastewater into the receptor media; (2) and the second part is linked to the difficulties of pollution characterisation and monitoring caused by the complexity of these matrixes. This investigation deals with these two aspects, an electrochemical treatment method of an olive mill wastewater (OMW) under platinized expanded titanium electrodes using a modified Grignard reactor for toxicity removal as well as the exploration of the use of some specific analytical tools to monitor effluent phenolic compounds elimination. The results showed that electrochemical oxidation is able to remove/mitigate the OMW pollution. Indeed, 87% of OMW color was removed and all aromatic compounds were disappeared from the solution by anodic oxidation. Moreover, 55% of the chemical oxygen demand (COD) and the total organic carbon (TOC) were reduced. On the other hand, UV- Visible spectrophotometry, Gaz chromatography/mass spectrometry, cyclic voltammetry and 13 C Nuclear Magnetic Resonance (NMR) showed that the used treatment seems efficaciously to eliminate phenolic compounds from OMW. It was concluded that electrochemical oxidation in a modified Grignard reactor is a promising process for the destruction of all phenolic compounds present in OMW. Among the monitoring analytical tools applied, cyclic voltammetry and 13 C NMR are among the techniques that are introduced for the first time to control the advancement of the OMW treatment and gave a close insight on polyphenols disappearance.     

美国EPA完成固定式发动机清洁空气标准修改

为执行和解协议,美国环保署最后修改标准以减少固定式发努机所造成的空气污染,这包括了工业、农业、油气产品、电厂和其他设施中的产生电力和能源的设备.宣布的最后修改条例中指出,将在2010年的基础上,分别减少2.87亿美元和1.39亿美元的基建投资和年度费用,     

Formic acid as an alternative reducing agent for the catalytic nitrate reduction in aqueous media

Formic acid was used for the nitrate reduction as a reductant in the presence of Pd:Cu/γ-alumina catalysts. The surface characteristics of the bimetallic catalyst synthesized by wet impregnation were investigated by SEM, TEM-EDS. The metals were not distributed homogeneously on the surface of catalyst, although the total contents of both metals in particles agreed well with the theoretical values. Formic acid decomposition on the catalyst surface, its influence on solution pH and nitrate removal efficacy was investigated. The best removal of nitrate (50 ppm) was obtained under the condition of 0.75 g/L catalyst with Pd:Cu ratio (4:1) and two fold excess of formic acid. Formic acid decay patterns resembled those of nitrate removal, showing a linear relationship between kf (formic acid decay) and k (nitrate removal). Negligible amount of ammonia was detected, and no nitrite was detected, possibly due to buffering effect of bicarbonate that is in situ produced by the decomposition of formic acid, and due to the sustained release of H2 gas.     

化学铁盐辅助除磷对生物除磷的影响研究

化学辅助除磷有助于污水厂实现磷达标,但其对生物系统存在潜在的影响。针对除磷药剂对生物除磷过程的影响展开研究,选用硫酸亚铁进行化学辅助除磷。药剂形成的化学污泥干扰生物除磷过程且成分复杂,故以磷酸铁、氢氧化铁模拟化学污泥,由钾离子、K/P摩尔比计算出同步除磷中的生物除磷,来探讨化学污泥对聚磷菌释磷/吸磷过程的影响。结果表明,连续投加硫酸亚铁使聚磷菌的释磷量、吸磷量降低;系统中磷酸铁含量0.075 mmol/L时聚磷菌的释磷和吸磷能力提高了约25%,磷酸铁含量0.15 mmol/L时对聚磷菌吸磷有抑制作用;氢氧化铁对聚磷菌释磷、好氧初期吸磷均有抑制作用。生物污泥与化学污泥存在交互作用。     

ABR反应器中COD/SO_4~(2-)值和硫酸盐负荷对SO_4~(2-)去除影响

利用厌氧折流板反应器,分别考察了反应器启动,及不同COD/SO42-比值和硫酸盐负荷对模拟废水中SO42-去除的影响。实验在(32±0.1)℃,pH为6.0⁶.5的条件下连续运行。结果表明:ABR经过约90 d的启动驯化阶段后,进水硫酸盐及COD浓度分别为1 500 mg/L和3 000 mg/L,水力停留时间为12 h条件下,硫酸盐去除率达到了92%。固定COD/SO42-比值为2.5时,随着进水SO42-浓度的增加(1 5006.5的条件下连续运行。结果表明:ABR经过约90 d的启动驯化阶段后,进水硫酸盐及COD浓度分别为1 500 mg/L和3 000 mg/L,水力停留时间为12 h条件下,硫酸盐去除率达到了92%。固定COD/SO42-比值为2.5时,随着进水SO42-浓度的增加(1 500³ 500 mg/L),SO42-去除率逐渐下降,最低为60%,相反SO42-去除速率随着硫酸盐浓度的增加而增加,最大为7.98 kg(/m3.d);维持恒定的硫酸盐浓度(1 500 mg/L),逐渐缩短水力停留时间以提高反应器中硫酸盐负荷,SO42-去除率呈现先上升后下降的复杂变化趋势,当水力停留时间为6 h时,SO42-去除率达到最大;随着COD/SO42-比值的提高,硫酸盐去除能力增强,且反应体系对硫酸盐负荷的耐受能力也逐渐增强。     

OMS-2负载Pt催化剂的制备及其催化氧化性能研究

采用前掺杂法、沉积-沉淀法和浸渍法制备了氧化锰八面体分子筛(OMS-2)负载Pt催化剂(Pt/OMS-2),对所制催化剂进行了结构和织构表征。并研究了不同制备方法和沉积-沉淀法中不同制备(Pt负载量和溶液的pH值)对Pt/OMS-2催化氧化CO性能的影响。结果表明,沉积-沉淀法制备的Pt/OMS-2-DP催化剂活性最好(T100=100℃)。这与Pt/OMS-2-DP催化剂中Pt颗粒大小及OMS-2载体与Pt之间存在强相互作用有关。Pt负载量明显影响Pt/OMS-2-DP催化剂的催化活性,3Pt/OMS-2-DP催化剂(Pt=3.0 wt%)催化活性最高,这是由于适当Pt负载量,Pt颗粒较小,并与载体OMS-2的相互作用较强,能较好地活化OMS-2晶格氧。pH值对Pt/OMS-2-DP催化剂催化性能影响较大,这与OMS-2的等电点和Pt在不同溶液中存在不同Pt配位体形式有关。     

GC/MS和GC/AED联用技术分析氯代邻羟基二苯醚类化合物的探讨

本文针对三氯新在脱氯反应过程中会产生多种二苯醚类化合物,提出采用GC/MS与GC-AED联用技术,对所有过程产物做出定性或定量分析,并通过实验证明其可行性.     

2008-2012年包头市空气质量变化分析

本文依据包头市环保局提供的该市每日空气质量实况日均值,对该市2008-2012年空气质量变化,特别是Ⅲ级/轻微污染以上日的天气特点进行了分析。结果表明,近5 a(2008-2012)里,按照国家《环境空气质量标准》(GB3095-1996),包头市空气质量较好,Ⅰ级优天数逐年增多,Ⅲ级/轻微污染以上日逐年减少,本市Ⅲ级/轻微污染以上日的空气质量主要介于Ⅲ级/轻微污染与Ⅲ级/轻度污染之间;包头市Ⅲ级/轻微污染以上日的首要污染物年和季节变化较显著;强沙尘或沙尘暴天气是本市出现严重污染的主要灾害性天气因素。     

六种有机物在亚/超临界水中氧化的反应动力学研究

为了给超临界水氧化设备工业化应用提供指导思路,本文设计制作了一套连续化的超临界水氧化仿工业化装置(压力为24MPa,H2O2过氧量倍数为3倍),选取甲基红、靛红、苯磺酸、对氨基苯磺酸、对二甲氨基苯甲醛、2,4-二硝基苯肼6种芳香烃化合物进行了从亚临界过渡到超临界状态下的水氧化试验,并以总有机碳(TOC)为表征研究了6种化合物的去除效果,以幂指数方程描述了6种化合物从亚临界到超临界的反应动力学参数。结果表明:6种有机物在亚临界至超临界点时间段内,反应物TOC的浓度随时间的变化呈现良好的线性下降趋势,且在亚临界状态下,足够的反应停留时间就能取得较好的TOC去除效果,而在超临界状态下,反应过程十分迅速,在较短的反应时间内也会取得较好的TOC去除效果,但随着反应时间的增加,在几分钟之内,TOC的去除率随时间的变化还是较为明显;6种有机物的反应活化能介于26.2～54.341kJ/mol之间,表明不同结构化合物SCWO反应的温度升高效应不同。     

GB/T28001-2011 4.3.1要素关键点分析

从危险源辨识和风险评价程序、方法和控制措施的确定几个方面,对GB/T28001-2011《职业健康安全管理体系要求》的4.3.1要素进行了关键点分析.