Determining floodplain sedimentation rates using Cs in a low fallout environment dominated by channel- and cultivation-derived sediment inputs, central Queensland, Australia

Fallout ¹³⁷Cs has been widely used to determine floodplain sedimentation rates in temperate environments, particularly in the northern hemisphere. Its application in low fallout, tropical environments in the southern hemisphere has been limited. In this study we assess the utility of ¹³⁷Cs for determining rates of floodplain sedimentation in a dry-tropical catchment in central Queensland, Australia. Floodplain and reference site cores were analysed in two centimetre increments, depth profiles were produced and total ¹³⁷Cs inventories calculated from the detailed profile data. Information on the rates of ¹³⁷Cs migration through local soils was obtained from the reference site soil cores. This data was used in an advection–diffusion model to account of ¹³⁷Cs mobility in floodplain sediment cores. This allowed sedimentation rates to be determined without the first year of detection for ¹³⁷Cs being known and without having to assume that ¹³⁷Cs remains immobile following deposition. Caesium-137 depth profiles in this environment are demonstrated to be an effective way of determining floodplain sedimentation rates. The total ¹³⁷Cs inventory approach was found to be less successful, with only one of the three sites analysed being in unequivocal agreement with the depth profile results. The input of sediment from catchment sources that have little, or no, ¹³⁷Cs attached results in true depositional sites having total inventories that are not significantly different from those of undisturbed reference sites.     

太湖大气氮、磷干湿沉降特征

于2018年1—12月,采集太湖湖滨及湖面共计9个点位600多个干湿沉降样品,估算了N、P干、湿沉降率以及全太湖2018年N、P干、湿沉降通量。结果表明,2018年太湖TN和TP月湿沉降率均值分别为161. 2和7. 1 kg/(km~2·月),TN和TP月干沉降率均值分别为103. 6和4. 5 kg/(km~2·月)。TN和TP年干沉降率空间分布规律为:湖面之上开阔水域处的TN和TP年干沉降率大于其他湖滨点位,TN和TP总沉降通量为7 702和333 t/a。2018年相比于2002—2003年,TN和TP总沉降通量分别降低了22. 6%和53. 8%。     

Stream Discharge and Riparian Land Use Influence In-Stream Concentrations and Loads of Phosphorus from Central Plains Watersheds

Total annual nutrient loads are a function of both watershed characteristics and the magnitude of nutrient mobilizing events. We investigated linkages among land cover, discharge and total phosphorus (TP) concentrations, and loads in 25 Kansas streams. Stream monitoring locations were selected from the Kansas Department of Health and Environment stream chemistry long-term monitoring network sites at or near U.S. Geological Survey stream gauges. We linked each sample with concurrent discharge data to improve our ability to estimate TP concentrations and loads across the full range of possible flow conditions. Median TP concentration was strongly linked (R ² = 76%) to the presence of cropland in the riparian zones of the mostly perennial streams. At baseflow, discharge data did not improve prediction of TP, but at high flows discharge was strongly linked to concentration (a threshold response occurred). Our data suggest that on average 88% of the total load occurred during the 10% of the time with the greatest discharge. Modeled reductions in peak discharges, representing increased hydrologic retention, predicted greater decreases in total annual loads than reductions of ambient concentrations because high discharge and elevated phosphorus concentrations had multiplicative effects. No measure of land use provided significant predictive power for concentrations when discharge was elevated or for concentration rise rates under increasing discharge. These results suggest that reductions of baseflow concentrations of TP in streams without wastewater dischargers may be managed by reductions of cropland uses in the riparian corridor. Additional measures may be needed to manage TP annual loads, due to the large percentage of the TP load occurring during a few high-flow events each year.     

Contamination and potential sources of polybrominated diphenyl ethers (PBDEs) in water and sediment from the artificial Lake Shihwa, Korea

Concentrations of polybrominated diphenyl ethers (PBDEs) were determined in water and sediment collected from the artificial Lake Shihwa and surrounding creeks. Total concentrations of 23 PBDE congeners in water and sediment ranged from 0.16 to 11.0 ng L⁻¹ and from 1.3 to 18 700 ng g⁻¹ dry weight, respectively. The concentrations of BDE 209 in water and sediment were 1-2 orders of magnitude higher than the total concentrations of other PBDE congeners. The concentrations of total PBDEs and BDE 209 in sediments were the highest compared to previously reported worldwide levels. The highest concentrations of PBDEs in water and sediments were found in creeks near industrial complexes. The PBDE concentrations gradually decreased with increasing distance from the creeks to the inshore and then offshore regions of the lake. BDE 209 was a major congener, accounting for 80% of the total PBDEs in water and sediment, consistent with a high consumption of deca-BDE for the brominated flame retardant market in Korea. Non-parametric multidimensional scaling ordination showed that surrounding creeks are major pathways of PBDE contamination associated with deca-BDE technical mixtures used in industrial complexes around Lake Shihwa. A significant correlation between total organic carbon and total PBDE concentration was found in sediments, and the correlation coefficients for individual PBDE congeners relatively increased from lower to higher brominated congeners.     

Species of Trace Metals,Organic Residues and Humic Substances in Sediments From the Taiwan Erhjin River and Coastal Areas

Abstract

Total organic carbon, humic substances, and the species of trace metals (including Cu, Zn, Pb, Cd, Cr, Mn and Fe) in six and seven phases, such as bioexchangeable (P1), skeletal (carbonates, P2), easily reducible (Fe and Mn oxides, P3), moderately reducible (crystalline Mn oxides, P4), organic matters with sulphides (P5), and detritus with minerals (P6) as well as organic with humic substances (PB4) and organic residues (PB6), were analyzed in sediments from the Taiwan Erhjin coastal (including river and estuarine) area, where places we found the copper pollution. Results indicate that higher percentages of P1 and P2 for copper, zinc, lead, cadmium and manganese in samples collected in March and September of 1990 were much higher than those in P3-P6. High percentages of chromium and iron in samples respectively collected in March and September of 1990 were found in P6. for the seven phase analysis, higher percentages of copper species in PB4 and PB6 as well as iron species in PB7 were observed. On the other hand, purified humic acid with the high contents of manganese and iron in humic acid as well as purified fulvic acids were generally found at the upstream stations; and low values at coastal stations. However, extremely high copper (as high as 1750μg g^?1, dry weight in fulvic acid and 820μg g^?1 in humic acid) and lead (821μg g^?1 in humic acid) concentrations with relatively high manganese and iron concentrations were observed in humic substances from the station near the copper recycling area. Comparing the results obtained from the Antarctic Ocean sediments with those from the Taiwan Erhjin Chi coastal sediments, the human impacts on the latter are evaluated.     

丹江口水库河南省辖区总氮污染状况调查

围绕丹江口水库总氮超标问题,以总氮项目为主要目标,以库区和入库河流为主要监测水体,通过对流域内包括面源在内的主要污染源调查,以及对主要入库河流和库内各代表水域的系统监测,研究丹江口水库总氮浓度时空分布、形态和来源,分析丹江口水库总氮超标原因,并评价丹江口水库总氮污染程度并分析其变化趋势。     

A summary of total mercury concentrations in flora and fauna near common contaminant sources in the Gulf of Mexico

Total mercury concentrations are summarized for environmental media and biota collected from near-coastal areas, several impacted by contaminant sources common to the Gulf of Mexico. Water, sediment, fish, blue crabs, oysters, clams, mussels, periphyton and seagrasses were collected during 1993–2002 from targeted areas affected by point and non-point source contaminants. Mean concentrations in water and sediment were 0.02 (±1 standard deviation = 0.06) μg l⁻¹ and 96.3 (230.8) ng g⁻¹ dry wt, respectively. Mean total mercury concentrations in fish, blue crabs, brackish clams and mussels were significantly greater than those in sediment, seagrass, colonized periphyton and oysters. Concentrations (ng g⁻¹ dry wt) averaged 23.1 (two seagrass species), 220.1 (oysters), 287.8 (colonized periphyton), 604.0 (four species of freshwater mussels), 772.4 (brackish clam), 857.9 (blue crabs) and 933.1 (nine fish species). Spatial, intraspecific and interspecific variability in results limited most generalizations concerning the relative mercury contributions of different stressor types. However, concentrations were significantly greater for some biota collected from areas receiving wastewater discharges and golf course runoff (fish), agricultural runoff (oysters) and urban stormwater runoff (colonized periphyton and sediment). Marine water quality criteria and proposed sediment quality guidelines were exceeded in 1–12% of total samples. At least one seafood consumption guideline, criteria or screening value were exceeded in edible tissues of blue crabs (6% total samples) and nine fish species (8–33% total samples) but all residues were less than the US Federal Drug Administration action limit of 1.0 ppm and the few reported toxic effect concentrations available for the targeted biota.     

Species of Trace Metals, Organic Residues and Humic Substances in Sediments From the Taiwan Erhjin River and Coastal Areas

Total organic carbon, humic substances, and the species of trace metals (including Cu, Zn, Pb, Cd, Cr, Mn and Fe) in six and seven phases, such as bioexchangeable (P1), skeletal (carbonates, P2), easily reducible (Fe and Mn oxides, P3), moderately reducible (crystalline Mn oxides, P4), organic matters with sulphides (P5), and detritus with minerals (P6) as well as organic with humic substances (PB4) and organic residues (PB6), were analyzed in sediments from the Taiwan Erhjin coastal (including river and estuarine) area, where places we found the copper pollution. Results indicate that higher percentages of P1 and P2 for copper, zinc, lead, cadmium and manganese in samples collected in March and September of 1990 were much higher than those in P3-P6. High percentages of chromium and iron in samples respectively collected in March and September of 1990 were found in P6. for the seven phase analysis, higher percentages of copper species in PB4 and PB6 as well as iron species in PB7 were observed. On the other hand, purified humic acid with the high contents of manganese and iron in humic acid as well as purified fulvic acids were generally found at the upstream stations; and low values at coastal stations. However, extremely high copper (as high as 1750μg g^-1, dry weight in fulvic acid and 820μg g^-1 in humic acid) and lead (821μg g^-1 in humic acid) concentrations with relatively high manganese and iron concentrations were observed in humic substances from the station near the copper recycling area. Comparing the results obtained from the Antarctic Ocean sediments with those from the Taiwan Erhjin Chi coastal sediments, the human impacts on the latter are evaluated.     

Identifying different types of bulking in an activated sludge system through quantitative image analysis

The present study proposes an image analysis methodology for the identification of different types of disturbances in wastewater treatment activated sludge systems. Up to date, most reported image analysis methodologies have been used in activated sludge processes with the aim of filamentous bulking detection, however, other disturbances could be foreseen in wastewater treatment plants. Such disturbances can lead to fluctuations in the biomass contents, affecting the mixed liquor suspended solids (MLSS), and in the sludge settling ability, affecting the sludge volume index (SVI). Therefore, this work focuses on predicting the MLSS and SVI parameters for different types of disturbances affecting an activated sludge system. Four experiments were conducted simulating filamentous bulking, zoogleal or viscous bulking, pinpoint floc formation, and normal operating conditions. Alongside the MLSS and SVI determination, the aggregated and filamentous biomass contents and morphology were studied as well as the biomass Gram and viability status, by means of image analysis.     

Analysis and fate of acephate and its metabolite,methamidophos, in pepper and cucumber

Abstract

Levels of acephate (Orthene^R) and its principle metabolite, methamidophos, in/on greenhouse‐grown pepper and cucumber fruits and leaves in relation to the applied methamidophos were monitored. Dislodgeable and total residues of acephate and methamidophos were determined by gas‐liquid chromatography equipped with a flame ionization detector (GC‐FID) and were confirmed by nitrogen phosphorus detector (GC‐NPD). The dissipation curves of the residues followed first‐order kinetics (R²> 0.96). Initial residues of acephate on fruits varied between pepper (15.12 ppm) and cucumber (2.16 ppm) . Total residues in fruits and leaves determined at intervals following application revealed the greater persistence of acephate on pepper fruits (half‐life [t_1/2] of 6 d) than on cucumber fruits (t_1/2 was 3.7 d) . T_1/2 values for the applied methamidophos were 4.7 and 5.3 d on pepper and cucumber fruits, respectively. Deacety‐lation of acephate (formation of its metabolite) was detectable 1 d following acephate treatment and reached a maximum of 2.05% of initial acephate residues 3 d after application on pepper fruits. On cucumber fruits, acephate metabolite reached a maximum of 2.12% one wk following application. No acephate residues were detected above the limit of detection of 0.001 ppm in pepper fruits 50 d following acephate application while its metabolite was detectable at that time (detectability limit was 0.0001 ppm).