环氧树脂的清洁生产

环氧树脂的生产中,环氧氯丙烷作为一种过量的原料,加以回收时与水一起被蒸馏出来,造成废水中的CODCr达1.0×105mgL,同时酚醛环氧树脂的生产也产生较多的含酚废水。本文介绍了一种环氧树脂清洁生产的新工艺,通过精馏环氧氯丙烷废水和含酚废水,能降低CODCr,回收环氧氯丙烷和苯酚。     

Prediction and cause investigation of ozone based on a double-stage attention mechanism recurrent neural network

● Used a double-stage attention mechanism model to predict ozone. ● The model can autonomously select the appropriate time series for forecasting. ● The model outperforms other machine learning models and WRF-CMAQ. ● We used the model to analyze the driving factors of VOCs that cause ozone pollution. Ozone is becoming a significant air pollutant in some regions, and VOCs are essential for ozone prediction as necessary ozone precursors. In this study, we proposed a recurrent neural network based on a double-stage attention mechanism model to predict ozone, selected an appropriate time series for prediction through the input attention and temporal attention mechanisms, and analyzed the cause of ozone generation according to the contribution of feature parameters. The experimental data show that our model had an RMSE of 7.71 μg/m³ and a mean absolute error of 5.97 μg/m³ for 1-h predictions. The DA-RNN model predicted ozone closer to observations than the other models. Based on the importance of the characteristics, we found that the ozone pollution in the Jinshan Industrial Zone mainly comes from the emissions of petrochemical enterprises, and the good generalization performance of the model is proved through testing multiple stations. Our experimental results demonstrate the validity and promising application of the DA-RNN model in predicting atmospheric pollutants and investigating their causes.     

Phenol degradation using combined effects of hydrodynamic cavitation and oxidant: Doehlert matrix

Hydrodynamic cavitation (HC)-based treatments have been proposed for the degradation of phenol as a toxic pollutant. The present work aimed to optimize the degradation of phenol using HC by means of Doehlert experimental design, which has not been previously addressed. Initially, operational parameters of hydraulic characteristics of the pump, inlet pressure, solution pH, and initial concentration were optimized; later, the effects of pH solution and H₂O₂ loading or initial pollutant concentration on phenol degradation were explored using the Doehlert experimental design. It was observed that phenol degradation is strongly dependent on the pH of the solution. Also, the acidic condition favors the formation of hydroxyl radicals and thus, the degradation of phenol. Based on the Doehlert matrix, the 94.1% phenol degradation and 68.60% total organic carbon (TOC) were obtained in 180 min at 304.5 mg/L of hydrogen peroxide at an initial concentration of 20 mg/L, 2.0 pH, and 90 psi inlet pressure, providing a cavitational yield of 6.33 × 10⁻⁶ mg/J and minimum treatment cost of US$/L 0.13. Overall, it has been observed that HC can be a promising route for the removal of pollutants (phenol) effectively using hydrogen peroxide as an additive.     

固定化酶催化氧化去除水溶液中酚的研究

用海藻酸钙凝胶包埋辣根过氧化物酶制成固定化以过氧化氢为氧化剂,进行了固定化酶催化氧化去除水溶液中酚的实验研究。对于１００ｍｌ酚住房为１００ｍｇ／Ｌ的单一苯酚或邻氯基水溶液,控制条件为：３％海藻酸钠液３０ｍｌ,凝胶粒径１ｍｍ,固定化时间１ｈ,酶包埋量５０ｕ,反应时间１ｈ,ｐＨ６及过氧化氢加入量２ｍｍｏｌ,单一苯酚和单一 基酚水溶液的酚去除率可分别超过８０％和７０％。     

煤气化废水的可生化性研究

本文通过对煤气化废水水质特性和实际废水生物反应器的研究,探讨了废水的复杂性和酚对COD的影响,研究表明,废水的可生化性较好,但经脱酚蒸氨后,因酚类物质的去除,COD的可生化性能大大降低,但仍可进行生化处理.     

煤矸石型煤着火燃尽性能的实验研究

研究开发适用于工业层燃炉和民用炉具的煤矸石型煤燃烧技术是解决煤矸石综合利用难题的一条新途径。通过对煤矸五型煤燃烧过程的实验研究,得出煤矸五型煤着火燃尽特性随温度和时间的变化规律及其关联式,并分析探讨了CR助燃剂的助燃效果和助燃机理,对完善煤矸石型煤的燃烧理论和工艺技术具有一定的参考价值。      

挥发酚和总氰化物在三种水质中测定方法的比对

本文采用连续流动注射法[1]和紫外分光光度法[2-3],分别对地表水、生活污水、工业废水三种水质中的挥发酚和总氰化物进行测定。实验结果表明:两种分析方法测定三种水质中的挥发酚和总氰化物结果基本一致,检出限、精密度、准确度、加标回收率均符合质量控制要求。连续流动注射法的自动化程度更高,操作更简便,可适用于多种水质挥发酚和总氰化物的分析。     

苏州市重点监控行业VOCs产生和排放特征调查与分析

通过调查与分析苏州市重点监控行业企业VOCs的产生和排放特征,调研典型企业,重点关注其涉及VOCs产生的工艺环节、原辅材料、排放浓度。结果表明:苏州市涉及VOCs排放企业行业众多,尤其以电子信息最多,其次为塑料橡胶制品行业、石油化工行业、纺织印染行业等。重点监控VOCs排放企业使用了大量有机溶剂,生产工艺中涉及VOCs排放的环节多,排放的VOCs种类多、成分复杂,具有行业特征。     

江苏省汽车零部件涂装行业VOCs排放情况初步调查

收集150家江苏省典型汽车零部件企业VOCs排放信息,对2家典型企业进行排放测试,分析江苏省该行业原辅料使用情况、产排污环节与核查要点、VOCs的排放特征,并提出最佳治理建议。研究表明,江苏省汽车零部件行业使用的涂料以溶剂型为主(占比约为79%)。废气按排放量大小依次为苯类、醇类、酯类和酮类,使用燃烧法处理后排放物种以烷烃为主,使用活性炭吸附法处理前后物种差异较小。吸附浓缩+燃烧组合处理工艺为目前最佳组合技术,处理效率 95%。     

典型医化园区废气和环境空气中挥发性有机物污染特征

对典型医化园区中的挥发性有机物(VOCs)污染特征进行研究,采用便携式气相色谱质谱法监测园区及周边14个点位的环境空气,大气预浓缩气相色谱质谱法监测10个点位排气筒中废气。结果表明,废气中非甲烷总烃为1. 77～218 mg/m3,环境空气中甲苯、二氯甲烷、丙酮、乙酸乙酯、四氢呋喃的质量浓度分别为0. 048～0. 833,0. 022～3. 07,0. 011～0. 312,0. 004～0. 754和0. 004～0. 529 mg/m3;废气和环境空气中均检出含量较高的芳香烃、卤代烃、酯类、酮类等化合物,以及园区特征的氟苯类和噻吩类化合物。园区环境空气明显受到工业源VOCs污染,分布趋势为生产越密集区域VOCs值越高,经过园区后沿着风向逐渐降低,园区下风向11 km处可测到园区特征氟苯类物质。