Multipoint source method in air pollution modelling of cold start emission

The paper presents a new method of air pollution modelling on a micro scale. For estimation of concentration of car exhaust pollutants, each car is treated as an instantaneous moving emission source. This approach enables us to model time and spatial changes of emission, especially during cold and cool start of an engine. These stages of engine work are a source of significant pollution concentration in urban areas. In this work, two models are proposed: one for the estimation of emission after cold start of the engine and another for the prediction of pollutant concentration. The first model (defined for individual exhaust gas pollutants) enables us to calculate the emission as a function of time after the cold or cool start, ambient temperature and average speed of motion. This model uses the HBEFA database. The second mathematical model is developed in order to calculate the pollutant dispersion and concentrations. The finite volume method is applied to discretise the set of partial differential equations describing wind flow and pollutant dispersion in the domain considered. Models presented in this paper can be called short-term models on a small spatial scale. The results of numerical simulation of pollutant emission and dispersion are also presented.     

地下车库汽车尾气污染源强计算浅析

近年来，地下车库空气污染越来越严重。在建设项目环境影响评价文件中．因为所采用的源强计算公式不同而导致不同的评价结果；所以就三种源强计算经验公式进行对比分析．发现公式二更适合地下车库污染源强的计算。     

GHG emission reductions and costs to achieve Kyoto target

Emission projection and marginal abatement cost curves (MACs) are the central components of any assessment of future carbonmarket, such as CDM (clean development mechanism) potentials, carbon quota price etc. However, they are products of very complex,dynamic systems driven by forces like population growth, economic development, resource endowments, technology progress and so on. The modeling approaches for emission projection and MACs evaluation were summarized, and some major models and their results were compared.Accordingly, reduction and cost requirements to achieve the Kyoto target were estimated. It is concluded that Annex I Parties‘ total reduction requirements range from 503--1304 MtC with USA participation and decrease significantly to 140--612 MtC after USA‘ s withdrawal. Total costs vary from 21--77 BUSD with USA and from 5--36 BUSD without USA if only domestic reduction actions are taken. The costs would sharply reduce while considering the three flexible mechanisms defined in the Kyoto Protocol with domestic actions‘ share in the all mitigation strategies drons to only 0--16%.     

On the determination of nitrous oxide emission factor during biomass burning

ＯｎｔｈｅｄｅｔｅｒｍｉｎａｔｉｏｎｏｆｎｉｔｒｏｕｓｏｘｉｄｅｅｍｉｓｓｉｏｎｆａｃｔｏｒｄｕｒｉｎｇｂｉｏｍａｓｓｂｕｒｎｉｎｇＣａｏＭｅｉｑｉｕ；ＺｈｕａｎｇＹａｈｕｉ（ＲｅｓｅａｒｃｈＣｅｎｔｅｒｆｏｒＥｃｏ－ＥｎｖｉｒｏｎｍｅｎｔａｌＳｃｉ...     

湖泊水体中硫酸盐增高的环境效应研究

通过对高原３个硫酸盐浓度差异的湖泊沉积物水界面硫的形态分布、扩散通量和碎屑有机硫通量等估算，揭示了湖泊水体硫酸盐增加以后的环境效应和自然反馈机制．研究认为：水体向沉积物内部扩散和界面硫酸盐还原作用是高硫酸盐浓度水体硫酸盐的主要清除作用，随硫酸盐浓度的增加，它在水体清除硫酸盐作用的贡献逐渐增大，而低硫酸盐含量湖泊水体生物同化吸收作用是水体硫酸盐的主要清除机制，它在硫酸盐浓度不同的水体没有差异．     

用S型皮托管测固定污染源排气参数的方法探讨

针对固定污染源排气监测实际工作用S型皮托管测定静压方法有争议的问题进行了理论分析和低速风洞试验。结果表明,用S型皮托管测固定污染源排气静压的平行法和垂直法二方法都在不影响排气量和污染物排放量测定结果的范围内;用全压与平行法静压差作为动压来计算流速可影响较大。     

溶剂法生产酞菁兰废水处理工艺

分析了煤油溶剂法生产酞菁兰过程中废水产生的节点及特征，介绍了以回收利用与末端处理相结合使废水减量化和达标排放的酞菁兰废水处理方法     

Methane emission in a rice field of Thailand

ＭｅｔｈａｎｅｅｍｉｓｓｉｏｎｉｎａｒｉｃｅｆｉｅｌｄｏｆＴｈａｉｌａｎｄ￥ＲｏｎｇＸｉａｎｇ；Ｃｈｕｅｎ－ＨｏｗＮｇ（ＥｎｖｉｒｏｎｍｅｎｔａｌＥｎｇｉｎｅｅｒｉｎｇＰｒｏｇｒａｍ，ＳｃｈｏｏｌｏｆＥｎｖｉｒｏｎｍｅｎｔ，ＲｅｓｏｕｒｃｅｓａｎｄＤ...     

不同气氛下燃煤SO2的排放规律研究

在立式管状电加热炉上对合山高硫煤在不同的气氛、温度以及Ca／S比的条件下进行了动态燃烧实验，对收集的气体产物进行了红外光谱分析，并讨论了CO2浓度以及温度等因素对SO2释放的影响。结果表明：不同浓度的CO2气氛对煤燃烧过程中硫的释放以及石灰石的固硫效率有着不同的影响，在高于900℃以后，较之空气气氛下，无论是否存在钙基固硫剂，其它三种02／C02气氛下S02的排放量都比较低，且在不同C02浓度下，温度对S02的排放影响不一致。     

广州市实施二氧化硫排污权交易研究

在排污权交易的理论基础上,借鉴美国二氧化硫排放权交易的政策和方法,设计了一套广州市实施二氧化硫排污权交易的框架,旨在为广州市控制削减二氧化硫排放提供一种基于市场的环境管理手段.