光催化技术在功能性空气过滤材料中的应用研究

针对目前气态污染物和气溶胶态污染物对人们生活健康产生的巨大危害,论述了目前国内外光催化技术在功能性空气过滤材料中的研究,阐述了光催化技术和纤维过滤技术的基本原理,并对光催化剂在纤维上的负载和应用做了详细介绍,最后提出了该领域可能的发展方向。     

镜泊湖流域浮游植物群落及其功能类群的时空演替特征研究

为了解镜泊湖流域浮游植物群落的时空变化特征,于2013年对镜泊湖流域进行了采样调查.共检测出浮游植物7门81种(属),以硅藻和绿藻为主,分属17个功能类群.时间上,春季浮游植物丰度、叶绿素含量和功能类群丰度均高于秋季.空间上,春季镜泊湖流域浮游植物丰度和叶绿素含量湖泊区＞汇水区＞出水区,秋季汇水区＞湖泊区＞出水区.多维尺度分析表明,镜泊湖流域不同区域之间浮游植物群落组成存在显著的空间差异.     

淄川区环境噪声监测与评价研究

噪声污染自20世纪70年代以来被称为城市环境问题的四大公害之一,是21世纪环境污染控制的主要对象。文章对中国城市环境噪声污染研究状况进行了深入研究,提出了淄川区环境噪声的研究目的和主要内容,并从城市环境噪声功能区的角度出发,对淄川区区域环境噪声进行监测与评价,分析了淄川区环境噪声污染的原因、现状及特征,对噪声水平进行评价,并提出相应降噪措施,以期为改善淄川声环境提供科学依据。文章建议在以后的环境噪声监测工作中,在全面布设测点并长期噪声监测的基础上,开展噪声环境影响预测与评价,这对经济和城市规模都在快速发展的淄川区而言,都更具有意义。     

微气泡曝气生物膜反应器同步硝化反硝化研究

同步硝化反硝化(SND)是废水处理中的新型生物脱氮工艺,和传统生物脱氮工艺相比具有显著的应用优势.本研究采用微气泡曝气固定床生物膜反应器,研究了SND过程中污染物去除效果并检测了生物膜功能菌群的变化情况.结果表明,在微气泡曝气固定床生物膜反应器内可以实现同步硝化反硝化,通过提高进水COD负荷和C∶N比,降低溶解氧(DO)浓度,同时增加填料床层孔隙率,可以改善SND效果.当进水COD负荷和总氮(TN)负荷为0.86 kg·(m3·d)-1和0.10 kg·(m3·d)-1,且填料床层孔隙率为81%时,COD和TN的去除率分别为97.6%和70.2%,实现了COD和TN的同步高效去除;同时,微气泡曝气对氧传质的强化作用使得氧利用率高达91.8%.此外,生物膜活性和硝化及反硝化功能菌群的变化,与反应器COD、氨氮和TN去除能力的变化基本一致.     

河流水域功能区划的技术原则探讨

对河流水域功能区划的技术原则、方法进行了探讨 ,可为进行河流水域功能区划和排污总量控制提供参考     

“Perceived neighbourhood” and tolerance relations: the case of Arabs and Jews in Jaffa,Israel

This paper examines the complex social reality of mixed ethnic residential areas, as reflected in drawn perceived neighbourhoods of Jews and Arabs living in homogenous and mixed neighbourhoods in Jaffa, Tel Aviv. Through in-depth interviews conducted among 89 Jaffa's residents, it illustrates how different perceptions about the residential area and its residents (including attitudes, emotions, feeling of fear/safety, collective identity and tolerant relations) are reflected in the form, size and consensus area of residents' perceived neighbourhoods. The study finds a clear association between tolerant attitudes and the size and consensus area of the perceived neighbourhoods. Arabs perceive their neighbourhood as significantly larger than Jews do and are characterised by a larger consensus area. These findings are explained by the Arab's strong social cohesion, common national identity, rootedness in Jaffa, as well as by tolerant attitudes towards Jaffa's Jewish population. The study demonstrates the interrelation between the spatial, social and perceptual dimensions associated with the mixed residential area, and illustrates how these dimensions are reflected in drawn perceived neighbourhoods.     

Gold Mining in the Greek “Village of Gaul”: Newspaper Coverage of Conflict and Discursive Positioning of Opposing Coalitions

The present study analysed media discourse on a gold mining controversy in Greece. Social actors shaped a pro-mining and an anti-mining coalition. The “village of Gaul” was a discursive resource used to depict conflict and it could denote either “resistance,” for anti-mining advocates, or “anarchy,” for pro-mining advocates. The same actor could be found to perform both the role of a powerful majority as well as the role of a repressed minority, which engaged varying scales of reference. Discursive positioning allowed for a switching among majority and minority roles. Each camp attempted to transform incalculable hazards into calculable risks and this was accompanied by a discursive appropriation of the past and the future of the study area. Social divide seems to have advanced discursive positioning of coalitions in a spiral-logic of interactionist confrontation at the cost of losing any common ground. Implications for environmental communication and environmental governance are discussed.     

THE INFLUENCE OF (x,y) UNCERTAINTY ON PREDICTION ERROR AND CONTOUR LINES FROM A THREE-DIMENSIONAL SURFACE1

ABSTRACT: In geohydrology, three-dimensional surfaces are typically represented as a series of contours. Water levels, saturated thickness, precipitation, and geological formation boundaries are a few examples of this practice. These surfaces start as point measurements that are then analyzed to interpolate between the known point measurements. This first step typically creates a raster or a set of grid points. In modeling, subsequent processing uses these to represent the shape of a surface. For display, they are usually converted to contour lines. Unfortunately, in many field applications, the (x, y) location on the earth's surface is much less confidently known than the data in the z dimension. To test the influence of (x, y) locational accuracy on z dimension point predictions and their resulting contours, a Monte Carlo study was performed on water level data from northwestern Kansas. Four levels of (x, y) uncertainty were tested ranging in accuracy from one arc degree-minute (± 2384 feet in the x dimension and ± 3036 feet in the y dimension) to Global Positioning Systems (GPS) accuracy (± 20 feet for relatively low cost systems). These span the range of common levels of locational uncertainty in data available to hydrologists in the United States. This work examines the influence that locational uncertainty can have on both point predictions and contour lines. Results indicate that overall mean error exhibits a small sensitivity to locational uncertainty. However, measures of spread and maximum errors in the z domain are greatly affected. In practical application, this implies that estimates over large regions should be asymptotically consistent. However, local errors in z can be quite large and increase with (x, y) uncertainty.     

依托热带资源优势,开发海南功能食品

本文论述了我国功能食品的定义,起源和发展,着重阐述了海南省具有开发功能食品的热带资源,市场和资金优势,并根据海南省的特点和当前我国功能食品的开发现状与发展前景,提出了海南省开发功能食品的措施。     

Modeling distribution changes of vegetation in China under future climate change

Climatic change will result in great changes in vegetation. In this paper, a biogeographical model, the BIOME1, was used to predict potential vegetation distribution in China under climate change. Firstly, the BIOME1 was validated according to the climate–vegetation relationships in China. Kappa statistics showed that the validated BIOME1 was able to capture the geographical patterns of vegetation more accurately. Then, the validated BIOME1 was used to predict the distribution of vegetation of China under two climatic scenarios produced by a Regional Circulation Model, RegCM2/CN. The simulation results showed obvious northward shifts of the boreal, temperate deciduous and evergreen and tropical forests, a large expansion of tropical dry forest/savanna and reduction of tundra on the Tibetan Plateau. Three vulnerable regions sensitive to climate changes are pointed out, i.e., Northern China, the Tibetan Plateau and Southwestern China (mainly Hengduan Mountains in Yunnan Province and west of Sichuan Province). In recent decades, China has experienced dramatic industrialization and population growth, which exert strong pressure on the environment of China. The consequences of climate changes warrant more attention for maintaining a sustainable environment for China.