Injury risk functions for frontal oblique collisions

Objective: The objective of this article was the construction of injury risk functions (IRFs) for front row occupants in oblique frontal crashes and a comparison to IRF of nonoblique frontal crashes from the same data set.

Method: Crashes of modern vehicles from GIDAS (German In-Depth Accident Study) were used as the basis for the construction of a logistic injury risk model. Static deformation, measured via displaced voxels on the postcrash vehicles, was used to calculate the energy dissipated in the crash. This measure of accident severity was termed objective equivalent speed (oEES) because it does not depend on the accident reconstruction and thus eliminates reconstruction biases like impact direction and vehicle model year. Imputation from property damage cases was used to describe underrepresented low-severity crashes―a known shortcoming of GIDAS. Binary logistic regression was used to relate the stimuli (oEES) to the binary outcome variable (injured or not injured).

Results: IRFs for the oblique frontal impact and nonoblique frontal impact were computed for the Maximum Abbreviated Injury Scale (MAIS) 2+ and 3+ levels for adults (18–64 years). For a given stimulus, the probability of injury for a belted driver was higher in oblique crashes than in nonoblique frontal crashes. For the 25% injury risk at MAIS 2+ level, the corresponding stimulus for oblique crashes was 40 km/h but it was 64 km/h for nonoblique frontal crashes.

Conclusions: The risk of obtaining MAIS 2+ injuries is significantly higher in oblique crashes than in nonoblique crashes. In the real world, most MAIS 2+ injuries occur in an oEES range from 30 to 60 km/h.     

Emergency shutdown of fluidized bed reaction systems

With several industrial applications of fluidized bed technology recently commercialized worldwide, it becomes essential to develop safe operation methods for fluidized bed reaction systems (FBRSs) to prevent any influence on their process values, which lead to accidents. To preventing any disaster or malfunction in an FBRS, an emergency shutdown system (ESD) is initiated, closing the reaction system in case of any abnormality by effectively isolating the flammable gas. However, an ESD is also prone to the “inactivation problem,” in which in the case of failure it initiates the emergency shutdown, even when the operating conditions of the reaction system are abnormal. It is also vulnerable to a “malfunction problem,” where the emergency shutdown is performed even when the operating conditions of the reaction system are normal. In this study, these problems were solved by investigating a reaction system through the monitoring of appropriate parameters and setting up of trigger levels, which reflect the uniqueness of an FBRS using an ESD. The parameters were identified by analyzing the scenario leading to an accident. The trigger levels were determined as the points at which the loss is smaller in the presence of an ESD, as compared to the value of the loss function in the presence or absence of an ESD. Furthermore, the ESD design model was applied as a case study in the ammoxidation process of propylene. The results showed that an ESD can prevent an approximately 8 billion yen of loss due to accidents in plant operations, against an investment of 200 million yen.     

An LC-MS/MS method for creatine and creatinine analysis in paraquat-intoxicated patients

Abstract

A sudden increase in serum creatinine after paraquat intoxication has been reported in several clinical studies. However, this dramatic change of creatinine may be possibly due to an interconversion of creatine-creatinine in relation to paraquat toxicity. In order to investigate the creatine-creatinine relationship, a liquid chromatography tandem mass spectrometry in combination with electrospray ionization was developed and validated for simultaneous determination of creatine and creatinine in the serum. The chromatographic separation was achieved on a Gemini® C₆-Phenyl column with a gradient elution consisting of 0.1% formic acid in ultrapure water and methanol as the mobile phase. The method yielded suitable levels of specificity and selectivity, and calibration curves of creatine and creatinine in serum were linear over the concentration range of 0.5–200?µg mL^?1. The limit of quantification of both compounds was 0.5?µg mL^?1, and the method was accurate within the recovery range of 96.23–102.75%, indicating the robustness of the method. The method was successfully applied to toxicological samples from paraquat-intoxicated patients, and the concentrations of creatine and creatinine were quantified. High creatine concentrations in serum samples were observed which may lead to high serum creatinine despite normal kidney function as creatine is converted to creatinine in proportion to its concentration.     

区域主体功能实现与自然资源利用的定量关系研究

主体功能区划通过主体功能划分的方式将开发和保护结合,自然资源开发利用复杂化过程中资源利用与目标实现之间亟需实现基本的定量核算关系。本文从自然资源可持续利用角度,试图探讨建立初步的主体功能核算关系,通过核算框架进行生产、生活、生态主体功能概算与比较。以京津冀主体功能区与水资源为例,对所设立的核算关系进行了验证与应用,并构造绝对与相对量指标量化京津冀主体功能量、功能水资源投入量与效率,进行了异空间尺度与异质性功能的比较,为以主体功能实现最大化为目标的资源优化配置提供量化工具。结果显示:①利用生态服务价值测算的当量因子法与水足迹测算的投入产出法,刻画了水资源对于地区主体功能的支撑作用。②利用功能总量与单位功能水资源投入量指标完成了异质性功能在异质性空间上规模、结构、相应水资源效率的比较。基于算例结果得到以下结论:①本文构建的自然资源-主体功能核算关系框架能够有效衔接主体功能规划,定量核算能有效反映与评价资源对区域功能目标、经济开发活动的支撑作用。②区域资源配置存在相对功能实现的效率差异,可根据资源投入与功能产出之间的关系引导实现功能最大化目标的资源配置。合理、有效的量化手段能够推进主体功能制度的落实,也有助于当前中国空间规划体系编制与落实的实际指导效果。     

国家重点生态功能区县域环境监测质量评价方法及应用示范

以国家重点生态功能区县域环境监测质量评价为目标,综合应用德尔菲法、层次分析法和模糊综合评价法,构建了国家重点生态功能区县域环境监测质量评价方法,并确定了评价因子、权重系数、计算方法。该方法评价指标共分为三层:第一层为目标层,即国家重点生态功能区县域环境监测质量;第二层为准则层,包括人员及资质、现场监测、实验室管理、报告编制及数据上报;第三层为方案层,包括人员操作、持证上岗、资质认定、人员培训、水质布点采样流转情况、空气自动站运维情况、现场质控实施情况、实验室环境条件、样品试剂的保存与管理、仪器检定与校准、实验室质量控制实施情况、数据填报软件运行情况、监测报告规范性等13个评价要素。经矩阵一致性检验确定了各评价要素的权重,将该权重与各要素得分运算后得到县域环境监测质量评价结果。在此基础上,选取广东、山西、陕西、四川和青海等5个省份的15个国家重点生态功能区县域作为典型区开展了实地调研,并应用评价体系对其进行了监测质量等级评价。结果表明,15个典型县域中,环境监测质量等级为优的县域占13.3%,一般、较差的县域分别占66.7%、20%。县域环境监测承担单位在资质、报告编制及数据上报方面表现较好,在现场监测、人员操作方面问题突出,在实验室管理方面有待提升。     

一种包埋微生物复合填料的制备及性能评价

采用包埋法制备出一种复合生物填料，测其各项理化性质，并以NO。模拟废气验证其脱硝性能。填料主要由碳酸钙、牛粪堆肥腐殖质、菌剂载体、水泥、轻质珍珠岩、立体网状纤维及脱硝功能微生物等复合而成，粒径书12mm×20mm，自然堆积密度（471±0．8）kg／m2，持水量（49±1．3）％，比表面积3．91m2／g，平均机械强度（427．3±0．2）N，pH为10．5-0．2。填料能长期在潮湿环境中保持良好的粘结强度，并具有营养缓释及pH缓冲能力。包埋脱硝功能微生物复合填料中初期微生物数量5．3×10^5 CFU／g，运行60d后微生物数量达到8．6×10 8 CFU／g，闲置停运30d微生物有所减少，但重启后净化效率基本不变。当进气负荷低于I878mg／（13m3·h），气体停留时间为14．47s时，BF，的去除率高达93．15％。     

铅冶炼区土壤重金属总量和有效态含量的函数分析

采集铅冶炼企业周边3 000 m范围内220个表层土壤样品,测定了有毒有害元素铅、镉、砷和汞的总量和有效态含量,探讨了它们之间的关系。结果表明:研究区土壤受到汞、砷、铅、镉的污染依次明显严重,土壤重金属的总量和有效态含量的变异系数均大于100%,土壤镉、铅、汞、砷的生物有效性系数平均值分别为25.9%、17.2%、0.58%、0.11%。土壤铅、镉和砷的总量与其有效态含量呈显著正相关(P0.001),而汞的总量与其有效态含量的相关性不显著(P0.05)。土壤铅和镉的总量和有效态含量可以用直线函数和幂函数表达,函数反推的有效态值和对应统计值的变异系数不大于10%。     

流域经济增长空间分异研究——基于2001～2009年长江流域数据的面板计量分析

流域经济是以水系为轴线的区域经济，其发展状况对国民经济有重要影响，其研究为区域开发提供新视角。在理论方法上，根据内生经济增长理论，采用柯布 道格拉斯生产函数，构建一个包括技术进步、物质资本和人力资本作为内生要素的流域经济增长框架。在实践论证上，以长江为样本域，运用面板计量分析方法，测度生产要素对流域上中下游经济增长的影响。结果显示：不同生产要素对流域经济不同域段作用强度不同，且呈现出明显的梯度效应，即沿江而下，技术进步和人力资本对经济增长的贡献度逐渐加大，物质资本则恰好相反。在此基础上，提出缩小流域经济的不平衡程度的政策建议，主要包括促使流域上游地区人力资本开发、实施流域大开发战略和推进流域城市化等     

新乡市地表水体HCHs和DDTs的分布特征及生态风险评价

为了解新乡市地表水中HCHs和DDTs的分布特征及生态风险,采集新乡市18个地表水样并测定其中HCHs和DDTs的含量,采用概率密度函数重叠面积法和安全阈值法评价了HCHs和DDTs的生态风险.结果表明,新乡市地表水中HCHs和DDTs的质量浓度范围分别为1.28~49.2 ng·L-1和0.42~12.3 ng·L-1,与世界各地的地表水中HCHs和DDTs残留质量浓度相比属于中等污染水平.异构体比值表明HCHs污染的主要来源是林丹的使用,而DDTs的残留来源于工业品DDTs的使用.生态风险评价基于DDD、γ-HCHs和p,p'-DDT的暴露浓度以及相应的毒性数据,概率密度函数重叠面积法和安全阈值法均表明了这3种有机氯农药中DDD的风险最大,其次是γ-HCHs,p,p'-DDT的生态风险最小;安全阈值法进一步表明DDD、γ-HCHs和p,p'-DDT超过影响10%水生生物的概率分别为10.2%、5.94%和0.01%.     

基于资源环境承载力评价的土地利用功能分区研究

资源环境承载力是可持续发展度量和管理的重要参量和依据,是土地利用功能分区的前提和基础.从资源环境约束系统和保障系统两个维度,应用GIS空间分析和多因素综合评价法,探讨基于资源环境承载力评价的土地利用功能分区研究,并以重庆市渝北区为例进行实证研究.研究结论以期为优化国土空间开发格局和生态文明建设提供科学数据、规划思路和决策依据.