乳化炸药密度在线检测技术

简述了常见密度在线检测方法,提出了一种采用数字称重技术间接在线测量炸药密度的新方法,建立了乳化炸药密度数字在线检测与控制系统,包括系统硬件电路的设计、硬件和电气线路的安装,以及软件程序连接和调试.研究表明,样品质量与检测系统的数字输出存在良好的线性关系,测量精度满足要求.因此,该系统可实现乳化炸药密度的在线实时测定,同时还可通过PLC实现敏化效果的自动反馈与调控,从而保证乳化炸药的敏化效果和产品质量.     

Identification, analysis and dissemination of information on near misses: A case study in the construction industry

Near misses are well-known for providing a major source of useful information for safety management. They are more frequent events than accidents and their causes may potentially result in an accident under slightly different circumstances. Despite the importance of this type of feedback, there is little knowledge on the characteristics of near misses, and on the use of this information in safety management. This article proposes guidelines for identifying, analyzing and disseminating information on near misses in construction sites. In particular, it is proposed that near misses be analyzed based on four categories: (a) whether or not it was possible to track down the event; (b) the nature of each event, in terms of its physical features (e.g. falling objects); (c) whether they provided positive or negative feedback for the safety management system; and (d) risk, based on the probability and severity associated with each event. The guidelines were devised and tested while a safety management system was being developed in a healthcare building project. The monitoring of near misses was part of a safety performance measurement system. Among the main results, a dramatic increase in both the number and quality of reports stands out after the workforce was systematically encouraged to report. While in the first 4 months of the study – when the workforce was not encouraged to report – there were just 12 reports, during the subsequent 4 months – when the workforce was so encouraged – there were 110 reports, all of them being analyzed based on the four analytical categories proposed.     

改善深圳河水质的补水方案及生态影响初步分析

深圳河旱季天然径流量小而污染负荷高,为了改善河流水质,在削减入河污染物的同时有必要采取补水措施。利用水质模型,计算了不同污水处理率下,分别以污水资源化再生水、珠江口海水和大鹏湾海水为补水水源时,深圳河达到基本不黑臭所需的补水量。讨论了补水方案对河流水质、盐度、水动力条件的改变及其对生态系统的影响。研究表明,引海水对河流生态系统的冲击不容忽视。而污水资源化是较优的补水方案。     

甘肃省农业高质量发展水平测度及制约因子研究

结合农业高质量发展的特征,构建农业高质量发展评价指标体系,采用熵值法、障碍因子诊断模型对甘肃省2009—2018年农业高质量发展水平和制约因素进行分析。结果发现:①2009—2018年,甘肃省农业高质量发展综合水平整体呈增长态势,但农业发展质量不高。②农业绿色发展和农业科技创新是甘肃省农业高质量发展的主要短板。③人力资本和生态环境保护是制约甘肃省农业高质量发展的主要因素。基于研究结果,提出强化政府职能、培育和引进高质量农业人才、贯彻新发展理念、构建生态补偿机制等加快甘肃省农业高质量发展的政策建议。     

基于前景理论的地铁施工灾后重建方案决策研究

为解决地铁施工灾后有限重建方案的多属性决策问题,以技术先进性、工程造价、工期、对周围居民的生活的影响及环境保护措施可靠性作为决策属性指标,采用考虑决策者参照依赖、损失规避和敏感性递减等心理行为特征的多属性决策分析方法—前景理论,以综合前景值的大小作为评价指标,进行重建方案的选择,计算结果与工程实际较吻合。该研究方法可用于灾后重建方案的决策问题,为决策者提供了理论参考和决策依据。     

多参数指示南极普里兹湾浮游植物的时空变化

以南极普里兹湾沉积物为研究对象,运用气相色谱技术,研究了生物标志物菜子甾醇、甲藻甾醇、长链烯酮对应指示的硅藻、甲藻、颗石藻等浮游植物的生产量和种群结构的历史变化,结合2001—2011年实测和遥感水体ρ(Chla)(Chla为叶绿素a)及SST(海水表层温度)数据,探讨了该湾浮游植物生产量时空变化特征及其影响因素. 结果表明:过去100多年间南极普里兹湾浮游植物总生产量(212.04~759.10 ng/g)〔以w(菜子甾醇)+w(甲藻甾醇)+w(长链烯酮)计〕和w(硅藻)所占比例(62.28%~87.13%)〔以w(菜子甾醇)所占比例计〕均呈上升趋势,而w(甲藻)所占比例(10.09%~27.98%)〔以w(甲藻甾醇)所占比例计〕和w(颗石藻)所占比例(1.97%~9.74%)〔以w(长链烯酮)所占比例计〕则呈下降趋势. 全球变暖背景下浮游植物种群变动通过改变南大洋对CO₂的吸收进而影响全球碳循环. 水体ρ(Chla)与沉积生物标志物指示的浮游植物总生产量均具有湾内高、湾外低的空间分布特征. 湾内ρ(Chla)与SST的年际变化趋势相似,二者以2002—2003年和2009—2010年相对较高,SST分别为-0.30和0.01 ℃,ρ(Chla)分别为1.69和2.31 mg/m3;以2001—2002年和2010—2011年相对较低,SST分别为-1.19和-0.95 ℃,ρ(Chla)分别为1.08和0.79 mg/m3,表明该湾SST变化可较明显地影响浮游植物的生长.      

A guide for assessing control room operator performance using speed and accuracy,perceived workload,situation awareness,and eye tracking

In the petrochemical industry, control room operators must address safety-critical alarms and other tasks using complex interfaces. This study developed a guide for assessing human performance using standard human factors measurement tools, and tested the sensitivity of those tools with two interface designs (i.e., gray and black) at three levels of workload (i.e., easy, medium, and difficult). The guide measures human performance through speed and accuracy, perceived workload using two standard instruments (i.e., NASA Task Load Index (NASA-TLX) and Subjective Workload Assessment Technique (SWAT)), situation awareness through the Situation Awareness Global Assessment Technique (SAGAT), and gaze through eye tracking coordinates. Twelve engineering student participants completed one simulation session at each of the three workload levels using one of two interface designs. Workload was manipulated through the number of simulated events (failures) in each session. Overall, the speed and accuracy measures, workload ratings, and eye tracking showed sensitivity to differences in workload level, and situation awareness showed sensitivity to the interaction between workload level and interface type. None of the tools were sensitive to interface type alone. Accuracy was highest under easy workload. Time per failure decreased at higher workload levels. Perceived workload ratings from the SWAT increased as workload increased, but workload ratings from the NASA-TLX were not different across workload levels. When workload increased, situation awareness remained steady for the gray interface but decreased sharply for the black interface, illustrating an interaction effect. Finally, the percentage of time spent looking at different areas of the screen during steady-state periods differed among workload levels. The tools in this guide can be used in the petrochemical industry to make design decisions for control room interfaces when workload levels are a concern.     

Performance evaluation of integrated resilience engineering factors by data envelopment analysis: The case of a petrochemical plant

Petrochemical units are potentially prone to incidents that have catastrophic consequences such as explosion, leakage of toxic materials, and the stoppage of the production process. Resilience engineering (RE) is a new method that can control incidents and limit their consequences. It includes top-level commitment, reporting culture, learning, awareness, preparedness, and flexibility. However, this study introduces a new concept of RE (referred to as integrated RE or IRE) which includes the above factors in addition to self-organization, teamwork, redundancy and fault-tolerant. This study evaluates performance of IRE in a petrochemical plant through considering the obtained data from questionnaires and data envelopment analysis (DEA) approach. Moreover, the performance of RE and the new IRE are compared and discussed. The results show that although there is a strong direct correlation between the DEA results in two frameworks, the mean scores of efficiency in IRE is slightly higher than RE. This is the first study that introduces an integrated approach for RE. In addition, this study is amongst the first ones that examine the behavior of resilience engineering by DEA. Moreover, the superiority of IRE is shown through robust statistical analysis.     

因果图分析法应用于液氯泄漏事故分析

针对国内近年来氯气泄漏／爆炸事故频发的现状,选择其中具有典型性的江西油脂厂氯气泄漏事故,运用因果分析方法对其事故原因进行系统分析。并根据分析结果,以降低事故发生概率和严重度为目标,从管理角度提出预防对策。     

用高精度磁测圈定煤田自燃区的应用效果

煤田自燃在中国北方非常普遍,每年都给中国的煤炭资源以及生态环境造成重大损失。为控制和监测煤田自燃,须对其自燃边界进行圈定。煤层自燃后产生“热剩磁”,基于这一理论,运用高精度磁测圈定了西北某煤田自燃区的边界范围,并建立了“倾斜磁化有限延伸的板状体”模型进行正演。由钻孔验证的结果来看,高精度磁测圈定煤田自燃区边界范围的应用效果良好。