自然型氨基酸及其钾盐的 CO2吸收和再生特性

在CO2吸收过程中,选择具有不挥发和不发生氧化降解特性的氨基酸盐吸收剂有助于降低吸收剂损失和减轻环境污染风险,故本研究以CO2吸收速率和再生速率为指标,对L-精氨酸和精氨酸钾（PA）吸收剂的CO2吸收性能和常压下热再生性能进行了实验分析,并研究了吸收剂质量分数、反应温度及吸收-再生循环次数对CO2吸收特性的影响,同时还与乙醇胺（MEA）、二乙醇胺（DEA）和三乙醇胺（TEA）进行了对比分析.结果表明,在实验的质量分数范围内,PA具有最高的CO2吸收速率和吸收能力,分别为24.5×10-3mol.（L.min）-1和1.99 mol.mol-1,比相同质量分数的MEA高2.1%和290.2%.温度影响结果表明,40℃时PA和MEA的CO2吸收速率均高于其他实验温度.相同再生条件下,PA的贫液CO2负荷要略高于MEA,但PA的再生程度可达72.8%,比MEA高19%.同时,3次＂吸收-再生＂循环之后,10%PA的CO2吸收能力仍可保持在1.03mol.mol-1,比10%MEA高255.2%.实验结果也表明,L-精氨酸具有较强的CO2吸收能力,其CO2吸收速率与同质量分数的DEA可比.     

长江口滨岸及近海水体中胶体的分布和理化性质研究

利用切向流超滤技术(CFUF)分离出长江口滨岸及近海水体中的胶体,并对其稳定性和物质组成进行了定量分析.结果表明,XP和WSK胶体的尺寸和Zeta-电位随pH的升高而减小,XP、WSK胶体的等电点分别出现在pH<2、pH=3.8;所采水样的胶体有机碳(COC,M r1×103~1μm)浓度为7.7~35.7μmol·L-1,占总溶解有机碳(DOC)的7.1%~41.7%;三维荧光光谱(3DEEM)分析发现研究区出现类色氨酸荧光峰、类紫外富里酸荧光峰和类腐殖质荧光峰;胶体态Na、Mg、K、Ca、Co、Cr、Cu、Fe、Li、Mn、Ni平均分别占溶解态的0.33%、5.7%、0.975%、1%、7.2%、7%、11.9%、15.7%、5.5%、10.5%、11.3%.Co、Cr、Cu、Fe、Li、Mn、Ni与COC的结合能力大于Na、Mg、K、Ca.相关分析表明,胶体的尺寸、DOC、真溶解有机碳(UOC)与盐度呈负相关,COC与盐度无线性关系,胶体态痕量金属(Co、Cr、Cu、Fe、Li、Mn、Ni)总浓度与COC呈线性关系.     

改性壳聚糖CAD与微生物絮凝剂MBF8复配絮凝研究

采用水溶液自由基聚合反应,将丙烯酰胺(AM)、二甲基二烯丙基氯化铵(DMDAAC)接枝到壳聚糖分子上制成了阳离子改性壳聚糖(CAD).经FT-IR、XRD、zeta(ξ)电位、凝胶色谱等分析确定,CAD为淡黄色透明液体,pH值为3.7,相对分子质量为2.88×10⁶,阳离子度为16.7,等电点(0.1%溶液)约为pH值10.5,有效成分2.6%,主要特征官能团有羟基、氨基、季铵基和酰胺基, 呈不规则晶体结构.将CAD与相对分子质量3.67×10⁵的多糖类电负性微生物絮凝剂MBF8复配,对浊度12~460 NTU、离子强度3.0 mmol·L^-1的高岭土悬浊液进行烧杯实验.结果表明,MBF8与CAD的最佳使用方式为先投加MBF8后投加CAD,复配比5:3时效果最好,适用的pH范围为6.0~10.0.采用PAC(3.0 mg·L^-1)+MBF8+CAD(1.0 mg·L^-1)复配絮凝,pH=8.0下,对浊度为110 NTU的高岭土悬浊液,浊度去除率>97%,残余铝<0.08 mg·L^-1,絮体大、沉降快,絮凝效果优于PAC+分子量800万、1200万的阴离子PAM及分子量1500万的阳离子PAM.     

Sulfur speciation and bioaccumulation in camphor tree leaves as atmospheric sulfur indicator analyzed by synchrotron radiation XRF and XANES

Analyzing and understanding the effects of ambient pollution on plants is getting more and more attention as a topic of environmental biology.A method based on synchrotron radiation X-ray fluorescence and X-ray absorption near edge structure spectroscopy was established to analyze the sulfur concentration and speciation in mature camphor tree leaves (CTLs),which were sampled from 5 local fields in Shanghai,China.Annual SO2 concentration,SO42-concentration in atmospheric particulate,SO42-and sulfur concentration in soil were also analyzed to explore the relationship between ambient sulfur sources and the sulfur nutrient cycling in CTLs.Total sulfur concentration in mature camphor tree leaves was 766-1704 mg/kg.The mainly detected sulfur states and their corresponding compounds were +6 (sulfate,include inorganic sulfate and organic sulfate),+5.2 (sulfonate),+2.2 (suloxides),+0.6 (thiols and thiothers),+0.2 (organic sulfides).Total sulfur concentration was strongly correlated with sulfate proportion with a linear correlation coefficient up to 0.977,which suggested that sulfur accumulated in CTLs as sulfate form.Reduced sulfur compounds (organic sulfides,thiols,thioethers,sulfoxide and sulfonate) assimilation was sufficed to meet the nutrient requirement for growth at a balanced level around 526 mg/kg.The sulfate accumulation mainly caused by atmospheric sulfur pollution such as SO2 and airborne sulfate particulate instead of soil contamination.From urban to suburb place,sulfate in mature CTLs decreased as the atmospheric sulfur pollution reduced,but a dramatic increase presented near the seashore,where the marine sulfate emission and maritime activity pollution were significant.The sulfur concentration and speciation in mature CTLs effectively represented the long-term biological accumulation of atmospheric sulfur pollution in local environment.     

Simultaneous preconcentration of cadmium and lead in water samples with silica gel and determination by flame atomic absorption spectrometry

A new method that utilizes pretreated silica gel as an adsorbent has been developed for simultaneous preconcentration of trace Cd(II) and Pb(II) prior to the measurement by flame atomic absorption spectrometry. The effects of pH, the shaking time, the elution condition and the coexisting ions on the separation/preconcentration conditions of analytes were investigated. Under optimized conditions, the static adsorption capacity of Cd(II) and Pb(II) were 45.5 and 27.1mg/g, the relative standard deviations were 3.2% and 1.7% (for n = 11), and the limits of detection obtained were 4.25 and 0.60 ng/mL, respectively. The method was validated by analyzing the certified reference materials GBW 07304a (stream sediment) and successfully applied to the analysis of various treated wastewater samples with satisfactory results.     

改良型DAT-IAT工艺脱氮除磷运行工艺研究

对DAT-IAT工艺加以改良,在DAT池前端分隔出缺氧区和厌氧区,强化了系统脱氮除磷能力。并在不同运行条件下,对改良型DAT-IAT工艺的脱氮除磷效果进行研究,得出优化条件。结果表明:DAT池溶解氧浓度在1.8².2 mg/L之间;IAT池至DAT池的污泥回流比为300%;DAT池至缺氧区的混合液回流比为40%2.2 mg/L之间;IAT池至DAT池的污泥回流比为300%;DAT池至缺氧区的混合液回流比为40%⁵0%;IAT池采用曝气1 h、沉淀1 h、排水1 h的运行工况;系统泥龄在1350%;IAT池采用曝气1 h、沉淀1 h、排水1 h的运行工况;系统泥龄在13¹6 d时,改良型工艺可以同时取得较好的脱氮和除磷效果,并且改良型工艺的脱氮除磷能力明显优于常规DAT-IAT工艺。     

预富集技术在原子吸收光谱环境分析中的应用

原子吸收光谱法是分析环境水样中金属离子含量的有效方法之一。在测定时往往需要对样品进行前处理,然后再进行测定。文章介绍了近些年较新的一些分离富集技术在原子吸收光谱分析环境中金属离子时的应用,分析了离子交换树脂在样品中金属离子富集分离过程中的研究近况,评述了固相萃取、析相微萃取、单滴液滴微萃取、分散液液微萃取、离子液体萃取、浊点萃取等多种萃取方式在样品预富集中的应用进展,综述了活性炭、纳米粒子、淀粉、分子筛等吸附剂在富集环境水样中金属元素的应用现状,同时还对在线富集技术与流动注射分析技术联用在金属元素分析中的应用进展进行了评述。     

气相分子吸收光谱法测定水中硫化物浓度不确定度评定

采用气相分子吸收光谱仪法测定水样中硫化物的浓度,对其不确定度来源进行分析、评估。结果表明,当水样浓度为3．42mg/L时,考虑测定过程的标准溶液的配制、曲线拟合、仪器测量重复性等因素对测定结果造成影响,测得硫化物的相对合成标准不确定0．13mg/L,其中最主要的分量是由硫化物标准溶液引起的测量不确定度。     

Shear cutting and counter shear cutting of sandwich materials

New lightweight sandwich materials challenge existing forming processes as well as following process steps. As such the manufacturing potential of shear cutting has to be evaluated. Two cutting methods are compared. Method commonly used is shear-cutting within one stroke engaged, the other one is known as counter-shear cutting, which uses two strokes.The challenges of cutting sandwich materials are variation of hole diameter within the different layers, fraying of the textiles, deformation of the hole contour and burr formation. These effects occur in conventional shear cutting as the intermediate layer and the lower sheet metal are cut by the scrap of the upper sheet instead of the cutting punch.The following methodology included shear cutting with closed cutting edge i.e. cutting of holes into five different sandwich materials. The sandwiches exemplarily represent multiple kinds of possible material designs. For instance, aluminum and steel face sheets, different thicknesses of intermediate layers and different intermediate layers materials such as integrated textile fibers have been used. Adequate cutting parameters such as die clearance and the use of a blank holder have been determined. To achieve good results a stiff machine design with good guidance and precise control of punch position was crucial.Observations of conventional shear cutting revealed the need of small cutting clearance of 4%. High burnish area is possible for the upper face sheet due to the superimposed force by the lower face sheet. The major conclusion depicted that high cutting quality of sandwich materials requires counter shear cutting. Hence, the roll-over of the lower sheet facing the intermediate layer, the burnish area at the lower sheet, good cutting quality of the fibers improve significantly and burr formation is avoided completely. Summarized this paper provides cutting parameters for sandwich materials based on experimental work.     

人工湿地除磷存在的问题及其对策探讨

人工湿地是20世纪七八十年代发展起来的一种污水生态处理技术,能高效去除有机污染物,氮、磷等营养物,近年来得到了广泛的应用。对磷的去除不同于常规化学除磷或生化处理工艺,而是集物理化学法和生物法于一体,即通过基质、水生植物及微生物的协同作用完成。基质容易达到饱和是人工湿地除磷面临的主要问题,进水水质、水力条件、温度变化等条件也不同程度影响人工湿地的除磷效果。针对以上问题,提出了相应对策,以实现人工湿地除磷系统的稳定运行。