Are national biodiversity strategies and action plans appropriate for building responsibilities for mainstreaming biodiversity across policy sectors? The case of Finland

The Convention on Biological Diversity's national biodiversity strategies and action plans (NBSAPs) are major mechanisms for mainstreaming biodiversity into national policies. This article examines whether and how the NBSAPs contribute to mainstreaming biodiversity across policy sectors in Finland in order to halt biodiversity loss. We have developed an innovative analytical framework where the concept of responsibility addresses how motivations for mainstreaming can be built, and the concept of social learning outcomes addresses the extent of institutional changes for biodiversity. The Finnish NBSAP processes have been able to build diverse forms of responsibility (liability, accountability, responsiveness and care) in different policy sectors by providing new knowledge, careful process design and developing institutional linkages. Despite pro-biodiversity outcomes in the targeted policy sectors, the responsibilities do not diffuse from the environmental administration to other policy sectors to a sufficient extent. Closing this ‘responsibility gap’ is a key challenge for building effective environmental policies.     

农户兼业阶段性分化探析

当前农户兼业的阶段性分化其本质是农户之间兼业进程的不统一,进而导致了严重的农村社会分化问题。本文利用江苏省苏北地区农户调研数据分析了当前农户兼业阶段性分化的现状及其带来的社会后果,利用似不相关双变量Probit模型分析了农户兼业阶段性分化的原因,得出了阻碍农户兼业发展的主要制约因素。结果显示,家庭人力资本稀缺是农户实现兼业生产的主要制约因素,农户无法进行非农工作主要是受到家庭人口规模小、老龄化严重的限制,这一部分农户家庭生活水平低,面临严重的"贫困陷阱"。政府直接干预土地流转使部分农户被动退出了农业生产,形式上实现了农户兼业进程的统一,但损害了农户的土地权益,造成农村土地产权不稳定,降低了农户自发性退农倾向,妨碍了土地市场的进一步发展,因此实质上对农户兼业进程起到了阻碍作用。此外,由于土地承包经营证书对承包经营权权能、地块四至等信息界定不清晰,对农户兼业进程的发展没有刺激作用。综合以上结论可知,土地产权以及农户家庭人力资本是导致当前农户阶段性分化的主要原因。政府不应对农村土地市场进行直接干预,而应通过完善农村社保体系、扶持农户非农就业、加快新一轮土地确权发证工作以促进土地市场与农户兼业进程的发展,在市场机制为主、政府调控为辅的环境下合理实现土地的集中与农业规模经营。     

Hydrothermal liquefaction phase behavior of microalgae & model compounds in fused silica capillary reactor

A fused silica capillary reactor combined with a heating/cooling stage, a microscope and a digital camera were used to investigate phase behavior during the hydrothermal liquefaction of microalgae (Dunaliella tertiolecta) and model compounds, including soya protein and glycine, starch, glucose and xylose, stearic acid and palmitic acid. Bubbles were generated at 246°C and disappeared at 360°C upon heating when Dunaliella tertiolecta used as feedstocks. Moreover, liquid products were generated at 300°C upon heating and oily liquid products began to separate out at 250°C upon cooling. The phase behavior of soya protein was similar to that of the Dunaliella tertiolecta. Meanwhile, there only observed the bubbles generation during hydrothermal liquefaction of glycine. Heating the starch, glucose and xylose above 350°C generated black solids from carbonization. Stearic acid and palmitic acid only had the process of melting, dissolution, dispersion and precipitation.     

二乙烯三胺改性聚多巴胺包覆硅胶吸附日落黄

采用二乙烯三胺(DETA)改性聚多巴胺(PDA)包覆硅胶(SG)得到吸附剂SG@DETA/PDA。通过FTIR、SEM和氮气吸附-脱附等技术对SG@DETA/PDA进行了形貌和结构表征,并考察了其对阴离子染料日落黄的吸附性能。表征结果显示,SG@DETA/PDA表面有PDA微球团聚形成的较为致密的包覆层,其比表面积和孔体积均比吸附剂SG@PDA有小幅提高。实验结果表明:SG@DETA/PDA吸附日落黄的最佳工艺条件为溶液p H 2.0、吸附时间2.0 h、初始染料质量浓度150 mg/L,在上述最佳工艺条件及298 K温度条件下SG@DETA/PDA对日落黄的吸附容量为175.56 mg/g。SG@DETA/PDA吸附日落黄的过程可以分别用准二级动力学方程和Langmuir等温吸附方程很好地拟合,该吸附过程主要是通过静电作用的单分子层吸附,是一个吸热自发的熵增过程。     

铁氧化物复合氧化铝催化臭氧化过程中溴酸盐的生成控制

以市售活性炭、硅藻土和氧化铝小球为载体，考察了负载铁基活性组分对催化臭氧化过程中溴酸盐的控制情况，其中，铁基复合氧化铝小球体现出更好的溴酸盐还原特性和催化剂稳定性，证实催化剂中铁氧化物是溴酸盐得到有效控制的主要活性组分。进一步考察了铁基复合氧化铝小球催化臭氧化处理实际原水过程中对溴酸盐的生成控制，以及反应过程中溶解性有机碳（DOC）的去除情况。结果表明，与单独臭氧化相比，该催化剂既能有效去除水中的溶解性有机物，又能明显抑制溴酸盐的生成，反应50h，其活性并没有明显下降。催化剂失活主要归因于吸附位点数量的下降，可以通过负载铁氧化物来实现催化剂的再生。     

Using multivariate regression modeling for sampling and predicting chemical characteristics of mixed waste in old landfills

Municipal solid waste landfills pose a threat on environment and human health, especially old landfills which lack facilities for collection and treatment of landfill gas and leachate. Consequently, missing information about emission flows prevent site-specific environmental risk assessments. To overcome this gap, the combination of waste sampling and analysis with statistical modeling is one option for estimating present and future emission potentials. Optimizing the tradeoff between investigation costs and reliable results requires knowledge about both: the number of samples to be taken and variables to be analyzed.This article aims to identify the optimized number of waste samples and variables in order to predict a larger set of variables. Therefore, we introduce a multivariate linear regression model and tested the applicability by usage of two case studies. Landfill A was used to set up and calibrate the model based on 50 waste samples and twelve variables. The calibrated model was applied to Landfill B including 36 waste samples and twelve variables with four predictor variables.The case study results are twofold: first, the reliable and accurate prediction of the twelve variables can be achieved with the knowledge of four predictor variables (Loi, EC, pH and Cl). For the second Landfill B, only ten full measurements would be needed for a reliable prediction of most response variables. The four predictor variables would exhibit comparably low analytical costs in comparison to the full set of measurements. This cost reduction could be used to increase the number of samples yielding an improved understanding of the spatial waste heterogeneity in landfills.Concluding, the future application of the developed model potentially improves the reliability of predicted emission potentials. The model could become a standard screening tool for old landfills if its applicability and reliability would be tested in additional case studies.     

MCM-41介孔分子筛的合成及其对铜离子的吸附性能简

以微硅粉为硅源，CTAB和PEG-6000为模板剂，合成MCM-41介孔分子筛。采用XRD、N₂吸附-脱附曲线、FTIR以及TEM表征了其结构、比表面积、孔径分布及晶体形貌，并且以该样品为吸附剂，对含Cu²⁺的溶液进行了静态吸附实验。结果表明，以微硅粉为硅源成功合成了具有典型六方排列孔道结构的MCM-41，其比表面积为869.5 m²/g，孔容为0.97 cm³/g，平均孔径为3.3 nm；溶液pH为5~6时，MCM-41对Cu²⁺的去除效果最好；MCM-41对Cu²⁺的最大吸附吸附容量36.3 mg/g；MCM-41对Cu²⁺的吸附性能符合Langmuir吸附方程的特征。动力学研究表明，该过程符合准二级动力学模型。     

A hybrid decision-making approach based on FCM and MOORA for occupational health and safety risk analysis

IntroductionWith the development of industries and increased diversity of their associated hazards, the importance of identifying these hazards and controlling the Occupational Health and Safety (OHS) risks has also dramatically augmented. Currently, there is a serious need for a risk management system to identify and prioritize risks with the aim of providing corrective/preventive measures to minimize the negative consequences of OHS risks. In fact, this system can help the protection of employees’ health and reduction of organizational costs. Method: The present study proposes a hybrid decision-making approach based on the Failure Mode and Effect Analysis (FMEA), Fuzzy Cognitive Map (FCM), and Multi-Objective Optimization on the basis of Ratio Analysis (MOORA) for assessing and prioritizing OHS risks. After identifying the risks and determining the values of the risk assessment criteria via the FMEA technique, the attempt is made to determine the weights of criteria based on their causal relationships through FCM and the hybrid learning algorithm. Then, the risk prioritization is carried out using the MOORA method based on the decision matrix (the output of the FMEA) and the weights of the criteria (the output of the FCM). Results: The results from the implementation of the proposed approach in a manufacturing company reveal that the score at issue can overcome some of the drawbacks of the traditional Risk Priority Number (RPN) in the conventional FMEA, including lack of assignment the different relative importance to the assessment criteria, inability to take into account other important management criteria, lack of consideration of causal relationships among criteria, and high dependence of the prioritization on the experts’ opinions, which finally provides a full and distinct risk prioritization.     

固相萃取-GC/MS法测定地表水中3-甲基吲哚

采用微球硅胶键合C_(18)固相萃取柱萃取水样中的3-甲基吲哚,并用气质联用法测定,方法在0 mg/L~10.0 mg/L范围内线性良好,方法检出限为0.2μg/L。空白水样3个质量浓度水平的加标回收率为89%~94%,7次测定结果的RSD为2.3%~6.9%。用该方法测定7个实际地表水样品,其中4个地表水样品检出3-甲基吲哚,地表水样的加标回收率为81.5%~97.0%。     

树脂固载纳米铁对偶氮染料直接湖蓝5B的脱色性能研究

以FeSO4和NaBH4水溶液为前驱溶剂,以聚苯乙烯型阳离子交换树脂为载体,制备了树脂固载的纳米铁,室温下用于对偶氮染料直接湖蓝5B水溶液进行脱色研究。研究结果发现,脱色反应遵循准一级反应动力学,在初始pH为3~10的范围内,反应进行14 m in时,50 mg/L的染料溶液脱色率均能达到83%以上。固载的纳米铁材料可多次重复利用,溶液中释放的铁离子浓度不超过0.1 mg/L。