造纸工业总排水及漂白废水中AOX监测方法的研究

运用TOX测定仪对造纸工业废水及漂白废水中AOX(可吸附有机卤素)测定;水样用硝酸调pH＜2后,以双根活性炭玻璃填充柱连续吸附;将吸附有机物的活性炭在氧气流中燃烧热解、用微库仑法测定其卤化氢.样品前处理比现行活性炭振荡吸附法样品及试剂用量少、快速、重现性好.方法测定浓度下限为3.73μg/L.     

Dioxin formation in pulp and paper mills of India

Samples of effluents, sludge, pulp, final products (paper) and soil were collected from the identified pulp and paper mills in India. The samples were analysed for 2,3,7,8-tetrachloro-dibenzo-p-dioxin (2,3,7,8-TCDD) and other dioxin congeners and precursors. Pulp and paper mills using chlorine for the bleaching process showed the presence of 2,3,7,8-TCDD in effluent samples. In the effluent and pulp samples from mills where chlorine dioxide was used as a bleaching agent, the 2,3,7,8-TCDD congener ranged from below the detection limit 0.05 to 0.12 ngL⁻¹/ngg⁻¹. The relative standard deviation of reproducibility and the percent recovery of 2,3,7,8-TCDD were 2.07 and 82.4% in pulp and 2.8 and 92% in effluent, respectively. The 1,3,6,8-TCDD was the only other major dioxin congener found in the treated and untreated effluent and sludge samples. However, dichlorobenzene, trichlorophenyl, and hexachlorobiphenyl were detected in all samples. The formation of dioxins can be minimised by replacing chlorine with chlorine dioxide in bleaching processes in pulp and paper mills.     

Characterization of fulvic acids during olive mill waste composting (Elemental, Thermal and fluorescence analyses)

Elemental analysis, fluorescence spectroscopy and differential scanning calorimetry (DSC) were applied to the study of fulvic acids isolated from different stages during olive mill waste composting. The fulvic extracted acids are characterized by a high nitrogen content and O/C ratio values that may result from the high degree of humification and the synthesis of more condensed humic complexes. This was confirmed by fluorescence spectroscopy in the synchronous-scan mode by the decrease of shoulder intensities at intermediate wavelengths indicating the increase of polycondensation and conjugation of unsaturated structures and the greater uniformity of fluorophores. Fluorescence spectra in the emission, excitation and synchronous modes became simpler with compost maturation. This was confirmed by DSC results which proved the high degree of polycondensation of aromatic nuclei of fulvic acid molecules during olive mill waste composting.     

SZD/2-1600型组合式电除尘器在西北高寒地区水泥磨上的应用

介绍了SZD/2—1600型组合式静电除尘器的优良性能及特点。通过现场实践与改进,着重介绍了该技术的运用效果及几点体会,意在进一步推广该技术的应用。     

地浸采铀技术与工艺

地浸采铀是世界上十分先进的采矿技术，其基本原理是对可地浸砂岩型铀矿按一定网度布置工艺钻孔，从注液注孔入地浸液，使地浸液与铀进行充分反应，经铀液孔提出地表，在地表工厂进行萃取铀的过程，地浸法分为酸法和碱法两种，地浸采铀能使低品位砂岩型铀矿成为有工业价值的矿床，由于对环境污染小，已被世界大多数国家广泛采用。但是并非所有的砂岩铀矿都能地浸，只有符合地浸地质-水文评价指标的砂岩铀矿才能地浸。地浸工艺包括钻孔的布置、浸液的配制、地下水的复原和环境保护等方面。我国的地浸采铀于20世纪70年代开始探索，90年代中期开展了大规模的地浸砂岩铀找矿与开采工作，并取得了突破性进展，新疆512矿床是就是利用地浸技术评价与开采的我国第一座大型地浸铀矿山。     

用计算机模拟送进角与辗轧角对Accu-Roll轧机变形区的影响

在建立Accu-Roll轧机变形区模型的基础上,开发出计算机模拟软件,可方便地通过变形区纵剖面计算机图象显示分析工艺参数对变形区的影响,从而为合理地选取与优化工艺参数提供依据。     

生物—物理化学法处理制浆黑液的试验研究

采用酸中和—厌氧—好氧—生物活性炭或化学混凝综合法处理制浆黑液,探讨了酸中和处理的影响因素及厌氧处理对后段好氧处理的影响.结果表明:两种综合处理工艺对黑液中木质素及COD_(Cr)的去除有显著效果;厌氧处理比好氧处理对木质素的降解更为有利.     

金属尾矿建筑微晶玻璃组成的研究

从晶格常数、晶核剂、低共熔点等方面讨论了玻璃主成分确定、晶核剂选择等问题。用差热分析、Ｘ射线衍射等测试方法，研究其核化和晶化特性。研究表明：金属尾矿制取建筑微晶玻璃不但可行，而且ＣａＯ—ＭｇＯ—Ａｌ２Ｏ３—ＳｉＯ２系统玻璃在较低温度下即开始晶化，且均以透辉石为主晶相，尾矿掺量可达６５％以上。     

粉煤灰吸附铀的影响因素探讨

为探讨粉煤灰对铀的吸附特性,考察pH、吸附时间、铀溶液浓度对吸附能力的影响,测定了吸附等温线和吸附动力学。结果表明:其吸附等温线符合Freundlich和Langmuir吸附模型,pH值是影响铀去除率的主要因素,吸附铀的最佳pH=5,铀初始浓度越高,粉煤灰的吸附量越高。实验可为地下水复原特别是采用粉煤灰渗透反应墙修复受放射性污染的地下水提供设计依据。     

铜尾矿复垦后土壤微生物活性及其群落功能多样性研究

对安徽铜陵五公里尾矿区三叶草复垦后的土壤微生物活性和群落的功能多样性研究表明,复垦后每克土壤微生物细菌数已达2.3×107个,并存在一定量耐Cu2 、Cd2 、Zn2 、Cr6 、Pb2 、Ni2 的菌株,但种类少,主要为芽孢杆菌属、假单胞菌属和短杆菌属。BIOLOG测试结果显示,铜镉重金属离子的复合污染使土壤微生物群落丰富度降低;外源耐铜镉微生物菌剂的添加使尾矿区土壤微生物群落代谢剖面(AWCD)变化明显,提高微生物对单一碳源底物的利用能力,增加利用不同碳底物的微生物数量,减轻了重金属污染引起的土壤微生物群落功能多样性的下降,为尾矿区生境加速恢复提供一条有效途径。