改进测定水中氨氮分子吸收光谱法的试验研究

水中氨氮含量是反应水质状况的重要指标。文章对测定水中氨氮气相分子吸收光谱法(标准号HJ/T195-2005)进行了改进试验研究。第一,对氧化剂的配比进行了改进,使氨氮的测定范围扩展至100μg。第二,对标准HJ/T195-2005中直接使用亚硝酸钠标准溶液做标准曲线的处理方式也做了探讨。通过一系列对比实验认为,应用硫酸铵标准溶液做工作曲线更加准确合理。最后应用改进后的气相分子吸收光谱法和纳氏比色法或滴定法对多种实际废水样品进行同时测定。结果表明,改进后的气相分子吸收光谱法测定氨氮的范围更宽,灵敏度更高和准确度更好。     

西安表土中多环芳烃的污染特征及其来源解析

通过2008年采集西安不同功能区表层土壤样品,运用GC/MS质谱联用仪对美国EPA优控的16种多环芳烃(PAHs)进行定性、定量分析,来探讨西安表层土壤种多环芳烃的污染特征及其来源。结果表明,16种PAHs均被检出,西安表土中ΣPAHs浓度范围为125~9 057 ng/g,平均值为2 727 ng/g,主要以4~6环PAHs为主,共占总量的69%。PAHs的空间分布规律为:工业区>文教区>绿化区>郊区>农村。应用特征比值判断法可知,西安表土中PAHs主要是煤的不完全燃烧和机动车尾气排放所产生的混合源污染。借鉴国外土壤污染标准可知西安城区表土污染较为严重。     

分光光度法测定染料废水中的对氨基酚

以由地洛试剂为氧化剂，用分光光度法测定染料废水中对氨基酚的含量，进行了波长，贝特洛试剂用量及显色时间等分析条件的选择。精密度和准确度实验结果表明，该准确，快速，可用于染料废水中对氨基酚的测定。     

Preliminary Studies on Converting Agricultural Waste into Biodegradable Plastics—Part IV: Polysaccharide Containing Natural Materials

Corn distillers’ dry grain, corncob powder, hardwood powder, and sugar beet pulp were separately anionized by oxidation with sodium hypochlorite in aqueous solution. Solid reaction products instantly precipitated upon admixing each of the above-oxidized materials with soy protein isolate. Infrared spectra and differential scanning calorimetry supported the hypothesis that soy protein isolate complexed with all of the above-oxidized polysaccharides. Reaction products with either oxidized corn distillers’ dry grain or oxidized sugar beet pulp provided hard, brittle pellets with tensile strengths as high as 9.5 MPa, suggesting that these materials could be viable as biodegradable plastics.     

Vapour pressures, aqueous solubility, Henry's law constants and air/water partition coefficients of 1,8-dichlorooctane and 1,8-dibromooctane

New data on the vapour pressures and aqueous solubility of 1,8-dichlorooctane and 1,8-dibromooctane are reported as a function of temperature between 20 °C and 80 °C and 1 °C and 40 °C, respectively. For the vapour pressures, a static method was used during the measurements which have an estimated uncertainty between 3% and 5%. The aqueous solubilities were determined using a dynamic saturation column method and the values are accurate to within ±10%. 1,8-Dichlorooctane is more volatile than 1,8-dibromooctane in the temperature range covered (p_sat varies from 3 to 250 Pa and from 0.53 to 62 Pa, respectively) and is also approximately three times more soluble in water (mole fraction solubilities at 25 °C of 5.95 × 10⁻⁷ and 1.92 × 10⁻⁷, respectively). A combination of the two sets of data allowed the calculation of the Henry’s law constants and the air water partition coefficients. A simple group contribution concept was used to rationalize the data obtained.     

A summary and synthesis of procedural regulations and standards—Informing a procedures writer's guide

Well-written procedures are an integral part of any industrial organization for safe operation, managing risks, and continuous improvement. Regulatory bodies around the world require industries to have current, accurate, and appropriate procedures for most processes. Although the importance of procedures is recognized by all industries in general, significant incidents still occur due to procedural breakdowns. Some of the procedural breakdowns come from obvious problems such as the procedure not being available or the procedure being wrong. However, some incidents have occurred when correct procedures were available and the operator used those procedures. In these instances, the reason workers do not follow procedures correctly may be attributable the procedure being presented or designed in a manner that does not sufficiently communicate the information in a manner that is easily and quickly understood. This indicates that procedure writers may need more guidance on how to write and design procedures so they accomplish this. To effectively manage risk, procedures need to be technically correct (and regulatory compliant) and usable. As part of this, the current work is focused on developing a systematic approach to a procedure writer's guide that includes a regulatory compliant component. The work presented here consists of an effort to identify procedure-writing practices necessary to ensure regulatory compliance by summarizing a large sample of regulations and standards from several industries. The regulations and standards were organized to reflect common ideas and the implications in terms of human factors needs for procedure design were identified. This information will be used as part of the development of a writer's guide that accounts for human factors (HF) that includes explanations of HF implications and empirical support for each of the guidelines. The novelty of the method and information presented here is in the idea of leveraging the cumulative information available regarding procedures in regulations and standards. Incorporating this information into a procedure's writers guide in this manner may not only facilitate procedure being regulatory compliant for facilities in different geographies of the world, but could also support their being written with considerations for human performance.     

而今迈步从头越——《安全生产法》征求意见稿学习体会和修改建议

首先分析了我国《安全生产法》的发展沿革,且认真学习了目前发布的《安全生产法》征求意见稿,归纳了征求意见稿还应实现四个重点突破:必须体现以人为本的执政理念;职业危害防治应列为《安全生产法》的重要条款之一;安全生产执法监察应与公共安全及行政管理分离;应对工伤保险预防机制作出明确要求。此外,建议通过《安全生产法》的进一步修订实现我国安全生产的制度化建设:建议逐步建立安全生产分级监察管理体制;推进风险管理制度,对企业实行风险分级与分级监管;逐步提出建立安全生产监察员专业化制度;建立与国际接轨的生产安全事故统计报告系统;强化城市建设土地使用规划的风险管理和安全许可;生产安全事故应急管理应强化应急准备工作;建立独立生产安全事故调查机构和公开公正调查程序;应在《安全生产法》中明确"安全生产委员会"的组织形式和功能;生产安全事故责任追究应与激励政策相结合。