吴淞工业区大气降尘变化规律及趋势

吴淞工业区是重工业聚集区,烟(粉)尘的排放量非常大,造成该地区空气污染严重.为了解降尘的污染特征、变化规律及趋势,以近10 a监测数据为依据,运用方差分析等数理统计方法对工业区降尘量进行分析,检验不同季节降尘的差异并简要分析原因,使用秩相关系数法对其进行趋势分析.结果表明,工业区降尘量较混合区与清洁区明显不同; 工业区与混合区的降尘受本地源的影响较大,4季的降尘量没有明显差异,相反清洁区的4季降尘呈显著差异.10 a来工业区及其周边地区的降尘量下降了56%,说明环境综合整治取得了显著效果,使区域环境空气质量得到改善.     

Potentially toxic metal contamination of urban soils and roadside dust in Shanghai, China

A detailed investigation was conducted to understand the contamination characteristics of a selected set of potentially toxic metals in Shanghai. The amount of Pb, Zn, Cu, Cr, Cd and Ni were determined from 273 soil/dust samples collected within urban area. The results indicated that concentration of all metals except Ni in soils was significant, and metal pollution was even severer in roadside dust. A series of metal spatial distribution maps were created through geostatistical analysis, and the pollution hotspots tended to associate with city core area, major road junctions, and the regions close to industrial zones. In attempt of identifying the source of metals through geostatistical and multivariate statistical analyses, it was concluded as follows: Pb, Zn and Cu mainly originated from traffic contaminants; soil Ni was associated with natural concentration; Cd largely came from point-sourced industrial pollution; and Cr, Ni in dust were mainly related to atmospheric deposition.     

隔爆型电机在火炸药危险场所应用的安全性分析

针对普通隔爆型电机应用于火炸药粉尘危险场所的安全性问题进行定量分析,设计壳体粉尘侵入量试验,系统研究不同间隙下的粉尘侵入量,根据试验数据,应用曲线外推法及阿贝尔(Abel)余容状态方程计算爆压,结合材料力学及薄壁理论进行隔爆型电气设备外壳强度及刚度的校核。计算表明:若壳体内粉尘较均匀的悬浮在空中,切向应力与许用应力处于同一数量级;如果火炸药粉尘在轴承室、接线盒等局部堆积成火炸药层,切向应力比许用应力大两个数量级。试验结果强调:用于火炸药粉尘危险场所的电气设备必须有特殊的防爆结构设计,普通的隔爆电机用于火炸药粉尘危险环境时存在一定的安全隐患。     

固定床中粒状脱硫剂除尘效率的研究

建立了非稳态过滤下的固定床颗粒层除尘效率模型.该模型尽可能地包含了影响固定床颗粒层除尘的参数,反映了沉积粉尘对除尘效率的影响；研究了以粒状脱硫剂为滤料的固定床在不同颗粒层厚度、空床气速、粒径下的除尘效率.结果表明,在颗粒层厚度为400～800 cm、空床气速≤0.4 m/s的条件下,颗粒层的除尘效率可达90％以上.     

废钢铁切割加工烟尘的治理

介绍了氧-乙炔火焰切割加工废钢铁产生的烟尘治理系统的设计和系统设备选型,重点介绍了烟尘捕集罩的设计和除尘器、电磁脉冲阀、风机的选型和PLC自动控制以及系统实际运行效果,为废钢铁加工企业治理污染提供一套简单、经济、实用的除尘系统作参考.     

克拉玛依市区大气尘污染研究

对克拉玛依市区大气尘污染的特征及变化规律进行了全面的分析和研究。结果表明，市区的尘污染有加重的趋势，降尘属中度污染，道路尘污 染也较严重。提出了一些具体的防治对策。     

燃煤锅炉湿式脱硫除尘一体化设备的综合分析

本文对湿式脱硫除尘一体化设备的结构和性能进行了较为全面的分析,指出了该设备存在的诸多弊病,提出了解决方案--脱硫、除尘分体组合式的思路.     

辽宁省典型城市道路尘PM2.5成分谱研究

为构建辽宁省典型城市道路尘源成分谱，分别采集了鞍山市和盘锦市道路尘样品，分析了其化学组分特征，用富集因子法和比值法分析了其主要来源，用分歧系数法分析了两个城市成分谱的相似度.结果表明：盘锦市和鞍山市道路尘PM_2.5中的化学组成以有机碳组分（OC）和地壳类元素（Al、Ca、Mg、Fe和K）为主.除Cu和V元素外，其余元素均表现为鞍山市的富集因子大于盘锦市.由比值法可得，盘锦市和鞍山市OC/EC分别为（13.20±6.26）和（3.94±0.63），均存在二次污染现象；NO₃^-/SO₄^2-的均值分别为（0.52±0.55）和（0.46±0.13），说明其道路尘PM_2.5受固定源影响更大.盘锦市与鞍山市道路尘成分谱分歧系数为0.354，说明两个源成分谱可能相似.     

Coupled infrared extinction spectra and size distribution measurements for several non-clay components of mineral dust aerosol (quartz, calcite, and dolomite)

Simultaneous size distributions and Fourier transform infrared (FTIR) extinction spectra have been measured for several representative components of mineral dust aerosol (quartz, calcite, and dolomite) in the fine particle size mode (D=0.1–1 μm). Optical constants drawn from the published literature have been used in combination with the experimentally determined size distributions to simulate the extinction spectra. In general, Mie theory does not accurately reproduce the peak position or band shape for the prominent IR resonance features in the 800–1600 cm⁻¹ spectral range. The resonance peaks in the Mie simulation are consistently blue shifted relative to the experimental spectra by 20–50 cm⁻¹. Spectral simulations, derived from a simple Rayleigh-based analytic theory for a “continuous distribution of ellipsoids” particle shape model, better reproduce the experimental spectra, despite the fact that the Rayleigh approximation is not strictly satisfied in these experiments. These results differ from our previous studies of particle shape effects in silicate clay mineral dust aerosols where a disk-shaped model for the particles was found to be more appropriate.     

全工班呼吸性粉尘测定及防尘措施研究

针对呼吸性粉尘对矿井工人身体健康的危害,对煤矿综采工作面、综掘工作面、炮掘工作面等进行分工种个体性的全尘和呼尘监测,测定了各工作面粉尘(全尘和呼尘)的浓度、粉尘分散度和SiO2浓度。其结果表明:全工班呼吸性粉尘测定的方法更加真实可靠,更真实地反映了呼吸性粉尘对井下各操作工种的致病危害,测得的各工作面各工种的呼尘浓度均高于国家标准。通过数据的分析以及工人的建议,提出了一些新式的、有效的防尘措施来降低呼吸性粉尘对人体健康的危害。