SCAR处理城市生活污水的效能及其微生物群落动态分析

利用强化循环厌氧反应器(SCAR)处理模拟城市生活污水,研究不同负荷条件下的反应器运行特征、污泥特性及微生物种群结构.结果表明,水力停留时间(HRT)为6 h可以作为反应器高效运行的关键控制参数,该条件下污水化学需氧量(COD)去除率达到75%以上.随着反应器容积负荷的逐渐提高,颗粒污泥中辅酶F420和产甲烷活性(SMA)逐渐增加,胞外聚合物(EPS)含量也不断提高,其中紧密黏附EPS(TB-EPS)含量的增加尤其明显.厌氧颗粒污泥性状和反应器对污染物的去除效率同时受到污泥负荷和HRT的影响,微生物的群落结构及其在反应器中的空间分布也受到污泥负荷的影响,不同代谢特征微生物在反应器不同空间位置的相对丰度随着污泥负荷的调整而改变.     

锌铜胁迫对Bacillus vallismortis EPS组分变化特征及其吸附性能的影响

近年来,微生物胞外聚合物(EPS)在吸附重金属方面的潜能引起了人们的广泛关注,但关于重金属对微生物及其EPS特性的影响鲜有报道.Bacillus vallismortis对锌铜矿捕收剂苯胺黑药具有良好的降解能力.为了解重金属对菌株的胁迫影响,探讨二者之间的相互作用,研究了Zn(Ⅱ)、Cu(Ⅱ)胁迫对菌株EPS产量、组分变化特征及其吸附性能的影响.结果表明,在Zn(Ⅱ)胁迫下,菌株培养至稳定期产生的EPS最多,当Zn(Ⅱ)为12 mg·L~(-1)时EPS产量翻倍,达到100.84 mg·g~(-1)(以VSS计),Zn(Ⅱ)能刺激菌株产生更多富含—COOH和—OH的胞外多糖;菌株在Cu(Ⅱ)胁迫下需培养至对数期产生的EPS最多,在Cu(Ⅱ)为6 mg·L~(-1)情况下EPS产量最高为60.65 mg·g-1(以VSS计),Cu(Ⅱ)的胁迫作用提高了菌株EPS中富含N—H和C—N的蛋白质含量;吸附实验结果表明,2种金属能通过胁迫菌株产生特异性EPS,为金属离子提供大量适用性结合点位,显著提高对重金属的去除能力.研究结果对应用生物法处理同时含有重金属和有机物的复合型选矿废水具有一定的指导意义.     

反渗透膜面细菌胞外多聚物提取方法研究

城市污水脱盐系统的反渗透(RO)膜面生物污堵问题严重影响了该技术的稳定运行,解析生物污堵机理的关键因素是微生物胞外多聚物(EPS)特征分析,然而目前细菌EPS提取方法多样,无统一标准,制约了EPS分析的可靠性和可对比性.基于此,本文以再生水厂RO膜面污堵物中分离的细菌为对象,采用水浴、超声、离子树脂、碱液4种方法提取EPS,以DOC和DNA含量表征提取的EPS总量和提取过程细胞破裂程度.结果表明,45℃水浴法不造成细胞破裂,提取总量多,是一种有效的提取方法.进一步对比不同提取时间条件下EPS溶液中多糖和蛋白含量变化,以及分子量、荧光特征等,综合认为提取1 h时,提取的EPS中多糖与蛋白相对含量稳定,不同分子量化合物均溶于水中,能客观地反映EPS特征.研究表明,45℃水浴1 h可以作为细菌EPS提取的适用方法应用.     

Headspace-SPME-GC-MS Identification of Volatile Organic Compounds Released from Expanded Polystyrene

A method for the identification of volatile organic compounds (VOCs) released from packaging expanded polystyrene (EPS) is presented. Headspace solid-phase microextraction (HS-SPME) with a 75-m carboxen-polydimethylsiloxan fiber was used as sample preparation technique before the determination of the volatile organic compounds by gas chromatography–mass spectrometry (GC-MS). For separation of compounds, two fused silica capillary columns of different polarity (DB-5ms and BPX-50) were used. Styrene monomer with his impurities and oxidation products, as well as residual pentane, were identified in the headspace of EPS.     

丁酸胁迫对产氢污泥以厨余为底物的产氢影响

采用丁酸对产氢污泥进行胁迫处理,经胁迫后的污泥接种厨余垃圾进行产氢实验,考察丁酸胁迫对提高产氢性能的影响。结果表明,低浓度胁迫能提高产氢污泥的耐丁酸性,从而提高产氢量,而胁迫浓度过高则抑制产氢污泥活性,胁迫浓度呈"horm esis"效应。实验采用的4 g/L胁迫浓度为最佳,反应结束后,丁酸浓度和产氢量分别为8 417.1 mg/L和63.72 mL/g VS,比空白提高了31.3%和114%。产氢过程中SCOD的主要来源是有机酸。对产氢污泥胞外多聚物(EPS)的测定表明,厨余垃圾酸化速率、氢气产生速率和EPS总量成正相关。     

热备用应急电源在化工企业中的应用

介绍了热备用应急电源(EPS)的分类、原理、选型、特点以及操作注意事项。随着智能化程度的提高、快速切换型离线技术的应用,具有抗晃电、稳频稳压、离线运行、快速切换、等功率拖动电机特性的应急电源产品,已不仅仅局限于变电所、厂区照明的应用,而且还用于安全设备、生产设备等。     

软/硬质悬浮填料对MBR中EPS的影响

以聚丙烯无纺布为膜组件,向浸渍式膜生物反应器(MBR)中分别投加硬/软质悬浮填料处理人工废水.分析测定EPS、SVI、膜污染阻力及跨膜压力的变化,采用统计分析方法研究了软/硬质悬浮填料对MBR中EPS及SVI的影响;通过扫描电镜(SEM)分析,表征添加软/硬质悬浮填料膜表面的污染状况.结果表明,添加软/硬质悬浮填料膜组件表面滤饼中的溶解性EPSS和结合性EPSB与膜污染阻力的皮尔逊相关系数(rp)分别为0.929～ 0.984和0.798～0.853,EPSS与膜污染阻力之间表现出更强的相关性,EPSS对膜污染阻力的贡献大于EPSB.添加软/硬质悬浮填料MBR污泥混合液的EPS与SVI的皮尔逊系数(rp)分别为0.895和0.798,呈现明显的正相关性.SEM分析也表明,添加软质填料的膜表面污泥覆盖程度大于硬质填料的膜表面,但膜内部的污泥沉积量明显低于硬质填料.与软质悬浮填料相比,硬质悬浮填料能导致MBR污泥混合液的SVI和EPS含量增大,增加膜污染速率和不可逆膜污染阻力,软质悬浮填料具有更好的控制膜不可逆污染的效能.     

外源硫诱导下的Desulfovibrio desulfuricans sub sp.EPS特性及对Zn(Ⅱ)的吸附

研究了3种外源硫(Na₂SO₄、Na₂SO₃和Na₂S₂O₃·5H₂O)对Desulfovibrio desulfuricans sub sp.(D.desulfuricans sp.)的胞外聚合物(EPS)的胁迫/诱导作用。结果表明,在还原性硫源0.50g/L Na₂SO₃的条件下,EPS产量最高,为2104.39mg/g VSS,蛋白质含量为1888.52mg/g VSS,较胁迫/诱导前均提高了300%以上;其对Zn(Ⅱ)的吸附性能最好,为954.4mg/g EPS,提高了98.17%。三维荧光(3D-EEM)结果表明,胁迫/诱导后EPS中类酪氨酸均大量增加;傅里叶红外光谱(FTIR)结果表明,胁迫后-OH、C=O、C-O-C等官能团均大量增加,在Zn(Ⅱ)的吸附中发挥了重要作用;X光电子能谱(XPS)结果表明,在还原性硫源(Na₂SO₃和Na₂S₂O₃·5H₂O)胁迫/诱导后,EPS中C-O/C-N、C=N和某种含氧基团(X)大量增加,可能是吸附Zn(Ⅱ)的主要基团。     

Chitosan/albumin/CaCO3 as mimics for membrane bioreactor fouling: genesis of structural mineralized-EPS-building blocks and cake layer compressibility

Membrane bioreactor biofouling is usually described as an extracellular matrix in which biopolymers, inorganic salts and active microbes co-exist. For that reason, biomineralization (BM) models can be useful to describe the spatial organization and environmental constraints within the referred scenario. BM arguments were utilized as background in order to (1) evaluate CaCO₃ influence on flux decline; pore blocking and cake layer properties (resistance, permeability and compressibility) in a wide range of Chitosan/Bovine serum albumin (BSA) mixtures during step-pressure runs and, (2) perform membrane autopsies in order to explore the genesis of mineralized extracellular building blocks (MEBB) during cake layer build up. Using low molecular weight chitosan (LC) and BSA, 2 L of 5 LC/BSA mixtures (0.25-1.85 ratio) were pumped to an external ultra filtration (UF) membrane (23.5 cm², hydrophobic, piezoelectric, 100 kDa as molecular weight cut-off). Eight different pressure steps (40 ± 7 to 540 ± 21 kPa) were applied. Each pressure step was held for 900 s. CaCO₃ was added to LC/BSA mixtures at 0.5, 1.5 and 3 mM in order to create MEBB during the filtration tests. Membrane autopsies were performed after the filtration tests using thermo gravimetric, scanning microscopy and specific membrane mass (mg cm⁻²) analyses. Biopolymer-CaCO₃ step-pressure filtration created compressible cake layers (with inner voids). The formation of an internal skeleton of MEBB may contribute to irreversible fouling consolidation. A hypothesis for MEBB genesis and development was set forth.