撑起首都燃气安全一片蓝天——访北京燃气集团第一分公司运维工程所检测班班长孙文丰

孙文丰,北京燃气集团第一分公司运维工程所检测班班长,从事燃气工作6年来,平均每年参与首都燃气管道维检修项目百余起,实现零失误、零差错。2020年获北京市“职工技协杯”职业技能竞赛“燃气管网运行工”大赛冠军,2021年获“首都劳动奖章”,并作为燃气代表先后受邀参加了庆祝中国共产党成立100周年大会和北京冬奥会开幕式。     

强化混凝处理低温低浊松花江水研究

针对低温低浊水出水浊度不达标的问题进行了絮凝试验研究。结果表明,投加混凝剂聚合氯化铝(PAC)或聚合氯化铝铁(PAFC),剩余浊度、剩余CODMn均有所降低,继续加大投药量,浊度反而升高。进一步试验表明:在PAFC用量为12 mg/L,改性活化硅酸用量为0.12 mg/L条件下,剩余浊度、剩余CODMn分别达到0.21 mg/L和0.64 mg/L。改性活化硅酸的投加时间对混凝效果有一定的影响,混凝开始后330s投加改性活化硅酸可以提高混凝效果。     

聚合氯化铝铁在矿井水处理中的应用前景展望

针对我国当前矿井水净化处理现状,指出了矿井水混凝处理过程中存在的主要问题,阐述了传统絮凝剂聚合氯化铝的不足之处。根据对聚合氯化铝铁性能、特点以及经济性等方面的详细论述,分析了聚合氯化铝铁在矿井水混凝处理中的优势及应用前景,并对聚合氯化铝铁今后在矿井水处理应用中的发展方向提出了建议。     

电絮凝去除废水中多种重金属影响因素研究

目的以铁作为电极,研究电絮凝法处理含多种重金属废水的影响因素及效果。方法通过控制pH、停留时间、电流密度、电导率、废水初始浓度等因素至不同水平,考察处理效果、能耗及极板消耗的变化。结果随着停留时间、pH值及电流密度的升高,处理效果越好,但升高至一定程度后,处理效果提升并不明显;电导率对处理效果影响并不显著,但过低的电导率会增加能耗;废水初始浓度越高,要达到处理目标所需的能耗及极板消耗均越高。结论当pH为8.5~9.0、进水电导率为1500~2000μs/cm、停留时间为3~4 min、废水初始质量浓度20 mg/L、电流密度为13.2~19.8 A/m2时,处理效果最理想,对总铜、总镍、总铅、总锌、总镉及总铬的去除率达到99%以上,且能耗与极板消耗均为最低,电絮凝法更适合于重金属废水的深度处理。     

微纳米气泡改善杭州城市河道水生态环境的工程应用研究

于2013年4月至6月在杭州城市河道对微纳米气泡改善河道水生态环境进行了持续的原位监测实验.结果表明,与对照区相比,试验区水体温度平均升高0.7℃,pH增大0.2,溶解氧增加1.0 mg/L,而TDS浓度降低42 mg/L;水质污染指标高锰酸盐指数、总氮、氨氮、总磷平均浓度分别降低了8.45 mg/L、6.78 mg/L、8.90 mg/L和0.58 mg/L.由此可推测微纳米气泡在一定程度上能有效净化水质,为恢复良好水生生态环境提供新的方法和技术手段.     

氧化铁纳米粒子对土壤呼吸作用的影响研究

为了解Fe2O3纳米粒子对土壤有机碳分解矿化能力的影响,本研究采用室内培养实验,探讨了Fe2O3纳米粒子对土壤呼吸作用的影响。结果表明,在土壤中添加Fe2O3纳米粒子能够增强土壤呼吸作用,当Fe2O3纳米粒子加入量为10 g·kg-1时,土壤呼吸作用最强。本研究表明Fe2O3纳米粒子具有增强土壤有机碳分解矿化的作用。     

纳米铁的合成、性质及其在环境修复领域的应用

由于纳米铁的特殊性质,它在环境修复领域中的应用日渐增加。本文主要介绍了纳米铁的合成、性质以及在环境修复领域的应用情况。文章归纳了目前常用的几种纳米铁合成的物理方法和化学方法;介绍了纳米铁微粒重要的理化性质;并总结了纳米铁用于修复含氯有机物污染、重金属污染和其他无机物污染场地的应用情况。     

Photocatalytic activity of Fe-doped CaTiO3 under UV-visible light

The photocatalytic degradation of methylene blue（MB） over Fe-doped CaTiO3 under UV-visible light was investigated. The as-prepared samples were characterized using X-ray diffraction（XRD）, scanning electron microscope（SEM） equipped with an energy dispersive spectrometer（EDS） system, Fourier transform infrared spectra（FT-IR）, and UV-visible diffuse reflectance spectroscopy（DRS）. The results show that the doping with Fe significantly promoted the light absorption ability of CaTiO3 in the visible light region. The Fe-doped CaTiO3 exhibited higher photocatalytic activity than CaTiO3 for the degradation of MB.However, the photocatalytic activity of the Fe-doped CaTiO3 was greatly influenced by the calcination temperature during the preparation process. The Fe-doped CaTiO3 prepared at500°C exhibited the best photocatalytic activity, with degradation of almost 100% MB（10 ppm）under UV-visible light for 180 min.     

Catalytic bubble-free hydrogenation reduction of azo dye by porous membranes loaded with palladium nanoparticles

Catalytic bubble-free hydrogenation reduction of azo dye by porous membranes loaded with palladium （Pd） nanoparticles was studied for the first time. The effects of Pd loading, dye concentration and reuse repetitions of membranes were investigated. In reduction, the dye concentration decreased whereas the pH rose gradually. An optimal Pd loading was found. The catalytic membranes were able to be reused more than 3 times.     

Efficient dechlorination of chlorinated solvent pollutants under UV irradiation by using the synthesized TiO2 nano-sheets in aqueous phase

Titanium dioxide(TiO2), which is the widely used photo-catalyst, has been synthesized by simple hydrothermal solution containing tetrabutyl titanate and hydrofluoric acid. The synthesized product has been applied to photo-degradation in aqueous phase of chlorinated solvents, namely tetrachloroethene(PCE), trichloroethene(TCE) and 1,1,1-trichloroethane(TCA). The photo-degradation results revealed that the degradation of these harmful chemicals was better in UV/synthesized TiO2 system compared to UV/commercial P25 system and UV only system. The photo-catalytic efficiency of the synthesized TiO2 was 1.4, 1.8 and 3.0 folds higher compared to the commercial P25 for TCA, TCE and PCE degradation, respectively. Moreover, using nitrobenzene(NB) as a probe of hydroxyl radical(.OH), the degradation rate was better over UV/synthesized TiO2, suggesting the high concentration of.OH generated in UV/synthesized TiO2system. In addition,.OH concentration was confirmed by the strong peak displayed in EPR analysis over UV/synthesized TiO2system. The characterization result using XRD and TEM showed that the synthesized TiO2 was in anatase form and consisted of well-defined sheet-shaped structures having a rectangular outline with a thickness of 4 nm, side length of 50 nm and width of 33 nm and a surface 90.3 m2/g. XPS analysis revealed that ≡Ti-F bond was formed on the surface of the synthesized TiO2. The above results on both photocatalytic activity and the surface analysis demonstrated the good applicability of the synthesized TiO2 nano-sheets for the remediation of chlorinated solvent contaminated groundwater.