Debromination of decabromodiphenyl ether by organo-montmorillonite-supported nanoscale zero-valent iron：Preparation, characterization and influence factors

An organo-montmorillonite-supported nanoscale zero-valent iron material(M-NZVI) was synthesized to degrade decabromodiphenyl ether(BDE-209). The results showed that nanoscale zero-valent iron had good dispersion on organo-montmorillonite and was present as a core-shell structure with a particle size range of nanoscale iron between 30–90 nm, characterized by XRD, SEM, TEM, XRF, ICP-AES, and XPS. The results of the degradation of BDE-209 by M-NZVI showed that the efficiency of M-NZVI in removing BDE-209 was much higher than that of NZVI. The efficiency of M-NZVI in removing BDE-209 decreased as the pH and the initial dissolved oxygen content of the reaction solution increased, but increased as the proportion of water in the reaction solution increased.     

Ultrasonic preparation of nano-nickel/activated carbon composite using spent electroless nickel plating bath and application in degradation of 2,6-dichlorophenol

Ni was effectively recovered from spent electroless nickel （EN） plating baths by forming a nano-nickel coated activated carbon composite. With the aid of ultrasonication, melamine- formaldehyde-tetraoxalyl-ethylenediamine chelating resins were grafted on activated carbon （MFT/AG）. PdC12 sol was adsorbed on MFT/AC, which was then immersed in spent electroless nickel plating bath; then nano-nickel could be reduced by ascorbic acid to form a nano-nickel coating on the activated carbon composite （Ni/AC） in situ. The materials present were carefully examined by Fourier transform infrared spectroscopy, X-ray diffraction, field emission scanning electron microscopy, X-ray photoelectron spectroscopy and electro- chemistry techniques. The resins were well distributed on the inside and outside surfaces of activated carbon with a size of 120 ± 30 nm in MFT/AC, and a great deal of nano-nickel particles were evenly deposited with a size of 3.8 ± 1.1 nm in Ni/MFT. Moreover, Ni/AC was successfully used as a catalyst for ultrasonic degradation of 2.6-dichloronhenol.     

Evaluating the effectiveness of marine actinobacterial extract and its mediated titanium dioxide nanoparticles in the degradation of azo dyes

Aim of the present study was to synthesize titanium dioxide nanoparticles （YiO2 NPs） from marine actinobacteria and to develop an eco-friendly azo-dye degradation method. A total of five actinobacterial isolates were isolated from Chennai marine sediments, Tamilnadu, India and analyzed for the synthesis of TiO2 NPs using titanium hydroxide. Among these, the isolate PSV 3 showed positive results for the synthesis of TiO2 NPs, which was confirmed by UV analysis. Further characterization of the synthesized TiO2 NPs was done using XRD, AFM and FI＇-IR analysis. Actinobacterial crude extract and synthesized TiO2 NPs was found efficient in degrading azo dye such as Acid Red 79 （AR-79） and Acid Red 80 （AR-80）. Degradation percentage was found to be 81% for AR-79, 83% for AR-80 using actinobacterial crude extract and 84% for AR-79, 85% for AR-80 using TiO2 NPs. Immobilized actinobacterial ceils showed 88% for AR-79 and 81% for AR- 80, dye degrading capacity. Degraded components were characterized by FT-IR and GC-MS analysis. The phytotoxicity test with 500 μg/mL of untreated dye showed remarkable phenotypic as well as cellular damage to Tagetes erecta plant. Comparatively no such damage was observed on plants by degraded dye components. In biotoxicity assay, treated dyes showed less toxic effect as compared to the untreated dyes.     

铁碳微电解法预处理聚氯乙烯(PVC)离心母液废水

采用铁碳微电解法对聚氯乙烯(PVC)离心母液废水进行预处理。分别考察反应时间、铁粉投加量、Fe/C(质量比)、pH值及曝气速率对母液废水中的COD和聚乙烯醇(PVA)去除率的影响,并在此基础上通过正交实验确定了废水COD的最佳处理条件。结果表明,最佳处理条件为:反应时间为4 h、铁粉投加量为30 g/L、Fe/C为1:2、pH值为2、曝气速率为0.8 L/min。在该条件下,废水中COD、PVA和TOC的平均去除率分别为(67%±2)%、(98%±1)%和(55%±3)%,废水的BOD/COD值从0.3提高到0.5,可生化性得到了显著提高。同时,废水中的NH3-N、浊度也在很大程度上得到了去除,出水中总铁含量也很低。     

盐酸小檗碱纳米乳的抑藻性能研究

选用处方为表面活性剂吐温-80、助表面活性剂甘油、油相大豆油及水,制备盐酸小檗碱纳米乳,并在对该纳米乳质量评价的基础上研究其对铜绿微囊藻的抑制效应。结果表明:在四相质量比为36∶9∶5∶10情况下制备出的水包油型盐酸小檗碱纳米乳澄清透明,分散均匀,平均粒径约为(14.2±3.8)nm,载药量为3 980 mg/L。该纳米乳能大幅提高盐酸小檗碱的抑藻性能,2 mg/L盐酸小檗碱纳米乳抑藻性能与8 mg/L未纳米化盐酸小檗碱抑藻性能相当,同时结果表明盐酸小檗碱纳米乳对无毒微囊藻的抑制效应强于有毒微囊藻。该研究将纳米药物技术应用于有害藻类的防控并取得较好效果,为纳米药物技术在水产养殖业应用提供科学参考。     

电价市场化需突破体制藩篱

国家发改委批复了云南直购电试点的输配电价,这意味着从政策制定者角度看,直购电仍是现阶段探索电力体制改革的可行方式。分析人士认为,电力体制改革不能仅停留在直购电试点上,不从根本上改变对现行电网的定位,不将竞价上网与输配分开统筹考虑,简单通过直购电试点,很难达到电力体制改革的预期效果。     

高效去除难降解毒害污染物的零价铁技术装备

文章综述了可高效去除硝基芳烃、氯代有机物、毒害重金属等典型难降解毒害污染物的零价铁技术的降解机理及应用效能,重点总结了其技术装备的改良优化与集成强化方式,系统比较了多种技术装备及应用流程的性能优势及应用缺陷。进一步展望了该技术国内外的最新方向及应用前景。     

填埋场中铁的生物化学循环对反硝化的影响

在模拟填埋体系中,以填埋场稳定的垃圾为接种物,通过控制有机物和硝氮负荷,研究了铁的生物化学循环对反硝化的影响.结果表明,垃圾填埋场内蕴藏着能实现铁的厌氧氧化还原并同步还原硝氮的复合功能菌群.通过改变有机物和硝氮的负荷,可使得填埋场内持续进行着铁的氧化还原循环和同步氮素转化.从氮素转化产物来看,铁的循环体系中氨氮浓度比传统的反硝化体系低4 mmol·L-1.填埋场内铁的生物化学循环过程对于原位脱氮具有极大贡献.     

BP神经网络在再生水补给密云水库水质评价中的应用

基于环境质量基本模型,将补给的再生水视为点源污染,建立了再生水补给后的湖库污染物浓度变化模型.在得到补给后主要污染物稳定浓度的基础上,建立BP神经网络模型,使用随机数发生器生成随机数据作为模型的学习样本和检验样本以满足BP模型对样本数量的需求.使用BP模型对再生水补给后的水质进行评价,评价结果证明了再生水补给的可行性与相对安全性.     

两种新型涂铁改性砂的过滤性能及反冲洗条件研究

以两种新型涂铁改性石英砂(纳米氧化铁改性砂,Nano-OCS;氧化铁改性砂,IOCS)及普通石英砂(RQS)为研究对象,考察了两种新型改性砂对沉后水腐殖酸及浊度的直接过滤效果,对其反冲洗条件进行优化研究,并对3种滤料的过滤效果进行了比较.结果表明,1滤层厚度为45 cm时,最佳滤速为6 m·h-1;3种滤料对腐殖酸和浊度的直接过滤效果依次为:Nano-OCSIOCSRQS,其中两种涂铁砂对腐殖酸的去除率分别为71.70%和61.61%;2Nano-OCS和IOCS滤柱的反冲洗流程分4步,对应的流程及最佳操作条件为:首先,用0.5 mol·L-1NaOH的溶液浸泡,气冲强度13 L·s-1·m-2,气冲时间6 min;然后,用0.075 mol·L-1的NaOH溶液与空气同时反冲洗,NaOH溶液冲洗强度为8 L·s-1·m-2,气冲强度13 L·s-1·m-2,冲洗时间3 min;接着用0.015 mol·L-1的FeCl3溶液与空气同时反冲洗,FeCl3溶液冲洗强度为8 L·s-1·m-2,气冲强度13L·s-1·m-2,冲洗时间2 min;最后,用清水冲洗,冲洗强度8 L·s-1·m-2,冲洗时间4 min.两种涂铁砂反冲洗前后表面形态结构更加复杂、粗糙度增加,对腐殖酸去除率进一步提高.3当滤层厚度由45 cm增加到80 cm时,Nano-OCS对腐殖酸直接过滤的最高去除率由74.6%提高至80.3%,平均去除率由57.9%提高至68.5%.