宁波南沙港网箱养殖水域营养状况评价及生物修复策略

根据2007年1月-2007年11月4个航次对宁波南沙港网箱养殖水域水体营养盐（NO2--N、NO3--N、NH 4＋-N和PO34--P）含量的监测结果,利用营养指数E法对水体的富营养化状态进行了评价。根据网箱养殖系统物质平衡方程和现场调查实验数据,估算了南沙港网箱养殖水域的氮磷污染负荷,以溶解态氮作为平衡指标,估算了鱼藻类合理的配比模式。结果表明,南沙港水体中NO2--N、NO3--N、NH4＋-N、PO4-P含量年变化范围分别为0.26μmol/L～4.86μmol/L,33.93μmol/L～82.86μmol/L,0.59μmol/L～7.86μmol/L,1.47μmol/L～2.97μmol/L,不同养殖区之间营养盐含量差异不显著（p〈0.05）;营养指数E值年变化范围介于2.41～15.99之间,表明该港水体处于重度富营养化状态;养殖区N/P值的年平均值为32.95,表明南沙港海区是一个氮过剩的养殖系统。南沙港网箱养殖水域氮、磷的负荷量分别为70.43 t/a和5.96 t/a,其中溶解态氮、磷负荷量分别为49.3 t/a和2.38 t/a;南沙港的藻类养殖面积需要在现有基础上再扩大0.44倍,达到107.52 ha,才可以与网箱养殖系统的氮磷污染负荷构成平衡;网箱养殖个数与藻类养殖面积（ha）的合理配比约为1∶0.027。     

中欧节能减排政策比较

欧盟国家开展节能减排较早,并积累了丰富的经验。比较了在金融危机影响下欧盟与中国在节能减排法律框架、管理方式、经济政策、产业政策和技术创新方面的异同,提出中国应该借鉴欧盟国家的先进经验,完善现有的节能减排政策体系,实现经济和社会的可持续发展。     

加氢站用45 MPa高压储氢瓶式容器火烧试验模拟*

为研究加氢站用高压储氢容器在火灾下的安全性能,采用计算流体力学（CFD）方法对45 MPa高压储氢瓶式容器火烧试验过程进行模拟研究,结合气瓶火烧试验,分析高压储氢容器火灾下的热响应过程,研究不同因素对储氢容器压力泄放装置动作时间的影响。结果表明:613 s以内试验压力与模拟数据的最大相对误差为3.9%,模型误差在可接受范围;不同充装介质对安全泄放装置动作时间影响不大;不同充装压力对容器内介质压升速率影响较大,充装水平较高时压力泄放装置更快动作,较低的充装压力下容器内介质温升较快;不同环境温度对介质温升影响较小。     

多铵复合盐分离工艺热工优化研究

多铵复合盐分离方法是利用纯物理的方法对焦炉煤气进行处理并分离出相应的盐类,在冷却结晶的过程中,从提高物料终冷温度的角度,对该方法进行相应的节能分析。一方面可以为当前生产提供节能改造依据,另一方面可以为该方法在大规模生产中的应用提供理论依据。     

微细粉尘在静电除尘器中的运动状态分析

为了分析线板静电除尘器中的电流体动力学过程,利用FEMLAB软件对电势泊松方程和电流连续性方程进行联立耦合求解,得到线板放电过程中电场强度分布,估算电晕外区不同粒径粉尘所受到的电场力;利用Fluent软件采用动力风模拟离子风的方法计算放电通道的流场分布,得到空间速度分布图,并分析了气流扰动对颗粒物的运动状态的影响。结果表明:利用动力风模拟离子风流场的分布符合放电环境下离子风的形成过程,该方法可以简化复杂的电流体问题。不同粒径粉尘在电场空间中的运动受到的电场力、离子风力随粒径大小不同而变化很大。研究结果对静电除尘器的改造和设计有很重要的指导意义。     

Managing water for life

Water is essential for life. In spite of the entire engineering infrastructure devoted to the treatment, regulation and beneficial uses of water, occasionally sufficient quantities and qualities of water become scarce. When this happens, just how do we decide how much less water to allocate to all of us and the activities we engage in to sustain and enhance our quality of life? This paper addresses some of the complexities of answering such a question, especially as society increasingly recognizes the need to provide flow regimes that will maintain healthy aquatic and floodplain ecosystems that also impact the economic, physical and even the spiritual quality of our lives. For we depend on these ecosystems to sustain our wellbeing. We are indeed a part of our ecosystems. We depend upon on aquatic ecosystems to moderate river flow qualities and quantities, reduce the extremes of floods and droughts, reduce erosion, detoxify and decompose waterborne wastes, generate and preserve flood plain soils and renew their fertility, regulate disease carrying organisms, and to enhance recreational benefits of river systems. This question of deciding just how much water to allocate to each water user and for the maintenance of viable aquatic ecosystems, especially when there is not enough, is a complex, and largely political, issue. This issue is likely to become even more complex and political and contentious in the future as populations grow and as water quantities and their qualities become even more variable and uncertain.     

An approach to calculating allowable watershed pollutant loads

To improve the management of discharge pollutants loads in the reservoirs’ watershed, an approach of the allowable pollutants loads calculation and its allocation, based on the water environment model, was proposed. Establishment of the approach framework was described at first. Under the guidance of this framework, two major steps were as follows: modeling and scenario analysis were involved and should be applied to support the decision of discharge loads management; Environmental Fluid Dynamic Code (EFDC) model was selected as the kernel model in this framework. In modeling step, spatial discretization for establishing cell map in model, data preprocessing, parameter calibration and uncertainty analysis (which is considered as the significantly relevant factor of the margin of safety (MOS)), were conducted. As a result of the research, the model-based approach presented as a combination of estimation and precise calculation, which contributed to scenario analysis step. Some integrated modules, such as scenario simulation, result analysis and plan optimization were implemented as cycles in the scenario analysis. Finally, allowable pollutant loads under various conditions were calculated. The Chaihe Reservoir in Liaoning Province, China was used as a case study for an application of the approach described above. Results of the Chaihe reservoir water quality simulation, show good agreement with field data and demonstrated that the approach used in the present study provide an efficient and appropriate methodology for pollutant load allocation.     

不同喷油策略对柴油-四氢呋喃混合燃料燃烧和排放的影响

为了解决环境污染和能源短缺等问题,本研究针对四氢呋喃作为一种含氧替代燃料展开研究.在一台六缸增压柴油机上开展了不同喷油策略下四氢呋喃和柴油混合燃料对柴油机燃烧和排放的影响研究,所用3种燃料分别为：纯柴油、5%四氢呋喃和95%柴油、15%四氢呋喃和85%柴油混合燃料（混合比例均为体积比）,以原机国六脉谱图为基准调节主喷时刻和喷油压力.结果表明,添加5%四氢呋喃使燃油消耗率增加,有效热效率降低,当加入15%四氢呋喃后燃油消耗率进一步升高,有效热效率相比于添加5%四氢呋喃有一定程度改善,但仍低于纯柴油燃料;当喷油压力高于100 MPa时,混合燃料的燃油消耗率和有效热效率随喷油压力的提高基本保持不变.四氢呋喃加入使小负荷下NO_x、CO和HC排放增加;大负荷下使NO_x排放增加,CO和HC排放逐渐降低,各工况下的碳烟排放均降低.由此可见,柴油-四氢呋喃混合燃料的有效热效率相比于纯柴油降低了1%~2%,加入四氢呋喃可有效降低碳烟排放和改善部分工况下的气体污染物排放.     

烧结烟气活性炭脱硫研究

研究了烧结烟气脱硫剂活性炭的反应原理。根据烧结厂烟气参数,在活性炭烧结烟气脱硫试验装置中,研究了活性炭粒度,烟气温度及活性炭质量对烧结烟气脱硫率的影响。研究结果表明:利用活性炭脱硫效率可以达到95.5%以上,为进一步工业应用奠定了基础。