Atmospheric carbonyl sulfide (OCS): Techniques for measurement in air and water

Experiments have shown that the oceans release a significant fraction of the yearly global emissions of carbonyl sulfide to the atmosphere. The experimental methods used to obtain, store and analyze air and water samples for OCS measurements are discussed and measurements of the Henry's constant in seawater at temperatures between 0 and 30°C are reported. The results are applied to oceanic flux models, and the global yearly emissions of OCS from oceans to the atmosphere are calculated to be ～8 × 10¹¹ gm/yr (0.8 Tg yr^?1).     

Risk assessment of amniocentesis between 11 and 15 weeks: Comparison to later amniocentesis controls

We studied 693 consecutive early amniocenteses (prior to 15 weeks) and found a spontaneous abortion rate to 28 weeks' gestation of 1·5 per cent. A control group of women having standard amniocentesis (15–20 weeks) experienced a 0·6 per cent fetal loss in the same period. There were no other apparent differences between the two groups. Early amniocentesis results are generally available 4–6 weeks before standard amniocentesis and 1–3 weeks after chorionic villus sampling (CVS). Alpha-fetoprotein (AFP) can be accurately assayed in 11- to 15-week amniotic fluid samples but additional studies are necessary to determine the accuracy of neural tube defect (NTD) detection. Including the present study, over 5800 early amniocenteses have been reported and the results suggest that this is a relatively safe prenatal diagnostic test and an alternative to CVS and later amniocentesis.     

The metabolic fate of 14C‐parathion by some fresh water phytoplankton and its possible effects on the algal metabolism

Abstract

The growth and total carbohydrate contents of Nostoc muscorum and Tolypothrix tenuis were greatly and significantly reduced by the application of parathion. “Chlorophyll a”, carotene biosynthesis and the rate of glucose absorption were enhanced after supplementation of parathion to the culture media of both cyanobacteria. Nitrogen released to the media, total nitrogen content and total nitrogen fixed were increased in both organisms‐ Increase in protein content was accompanied by remarkable drop in amino, peptide and ammonia fractions‐ Phosphorus uptake, RNA, DNA and total phosphorus content were accelerated to reach maximum accumulation at the highest insecticide level. In metabolism study using ¹⁴C‐labelled compound, parathion was readily degraded by Nostoc and Tolypothrix. Following ten days incubation, the aqueous fractions contained 21.1% and 18.1% of the initial activity in Nostoc and Tolypothrix respectively. TLC analysis of the hydrolytic products revealed the presence of three metabolites: p‐aminophenol, p‐nitrophenol and aminoparathion.     

Experimental investigation of the complex deflagration phenomena of hybrid mixtures of activated carbon dust/hydrogen/air

This paper aims to develop quantitative insights based on measured deflagration parameters of hybrid mixtures of activated carbon (AC) dust and hydrogen (H₂) gas in air. The generated experimental evidence is used to reject the claim of the null hypothesis (H₀) that severity of deflagrations of H₂/air mixtures always bound the severity of deflagrations of heterogenous combustible mixtures of AC dust/H₂/air containing the same H₂ concentrations as in the H₂/air binaries. The core insights of this investigation show that the maximum deflagration pressure rise (ΔP_MAX) and maximum rate of pressure rise ((dP/dt)_MAX) of this hybrid mixture are greater than those corresponding to deflagrations of H₂/air mixtures for all the dust and H₂ concentrations being examined. The deflagration severity indices (K_St and ES) of the hybrid mixture containing 29 mol% H₂ are found to be greater than those of the H₂/air mixture containing 29 mol% H₂. Also, the minimum explosible concentration (MEC) of the hybrid mixture is lower than that of the AC dust in air only. The insights gained should lead to better realization of the severity of a postulated safety-significant accident scenario associated with on-board cryoadsorption H₂ storage systems for fuel-cell (FC) powered light-duty vehicles. The identified insights could also be relevant to other industrial processes where combustible dusts are generated in the vicinity of solvent vapors. Moreover, these insights should be useful for supporting quantitative risk assessment (QRA) of on-board H₂ storage systems, designing improved safety measures for cryoadsorption H₂ storage tanks, and guiding H₂ safety standards and transportation regulations.     

Fenton-like oxidation and mineralization of phenol using synthetic Fe(II)–Fe(III) green rusts

Background, aim, and scope  

In literature, the environmental applications of green rust (GR) have mainly been pointed out through the reduction of inorganic contaminants and the reductive dechlorination of chlorinated organics. However, reactions involving GR for the oxidation and mineralization of organic pollutants remain very scantly described. In this study, the ability of three synthetic Fe(II)–Fe(III) green rusts, GR(CO₃²⁻), GR(SO₄²⁻), and GR(Cl⁻), to promote Fenton-like reaction was examined by employing phenol as a model pollutant. Unlike the traditional Fenton’s reagent (dissolved Fe(II) + H₂O₂), where the pH values have to be lowered to less than 4, the proposed reaction can effectively oxidize the organic molecules at neutral pH and could avoid the initial acidification which may be costly and destructive for the in situ remediation of contaminated groundwater and soils. The green rust reactivity towards the oxidative transformation of phenol was thoroughly evaluated by performing a large kinetic study, chemical analyses, and spectroscopic investigations.     

The Release of Trichlorofluoromethane from Rigid Polyurethane Foams

The use of trichlorofluoromethane (CCl₃F or F-11) in rigid closed cell polyurethane foams has risen dramatically during the past decade and now constitutes one of the major applications of this fluorocarbon, whereas previously aerosol spray cans consumed most of the production of F-11. Our study shows that F-11 remains in the foams for a very long time, perhaps for a hundred years or more, if the foams remain Intact. While in the past F-11 was released relatively soon after it was produced, now polyurethane insulating foams may constitute a growing reservoir from which F-11 will slowly and persistently leak Into the atmosphere for as long as the foams are in use. Although uncertainties remain, we estimate that in the next 50 years it is probable that as much F-11 will be tied up in foams as in the entire atmosphere at present.     

Elevated water temperature reduces the acute toxicity of the widely used herbicide diuron to a green alga, Pseudokirchneriella subcapitata

In the actual environment, temperatures fluctuate drastically through season or global warming and are thought to affects risk of pollutants for aquatic biota; however, there is no report about the effect of water temperature on toxicity of widely used herbicide diuron to fresh water microalgae. The present research investigated inhibitory effect of diuron on growth and photosynthetic activity of a green alga Pseudokirchneriella subcapitata at five different temperatures (10, 15, 20, 25, and 30 °C) for 144 h of exposure. As a result, effective diuron concentrations at which a 50 % decrease in algal growth occurred was increased with increasing water temperature ranging from 9.2 to 20.1 μg L^–1 for 72 h and 9.4–28.5 μg L^–1 for 144 h. The photochemical efficiency of photosystem II (F _v/F _m ratio) was significantly reduced at all temperatures by diuron exposure at 32 μg L^–1 after 72 h. Inhibition rates was significantly increased with decreased water temperature (P?<?0.01). Intracellular H₂O₂ levels as an indicator of oxidative stress were also decreased with increasing temperature in both control and diuron treatment groups and were about 2.5 times higher in diuron treatment groups than that of controls (P?<?0.01). Our results suggest water temperatures may affect the toxicokinetics of diuron in freshwater and should therefore be considered in environmental risk assessment.     

Unexpected bias of freeze-drying on the performance assessment of chemical oxidation of soils contaminated by polychlorinated biphenyls

Environmental Chemistry Letters - Processes based on chemical oxidation are widely used for environmental remediation. Analysis of environmental samples such as soils often requires a freeze-drying...     

Time‐based differences in the effects of positive and negative affectivity on perceived supervisor support and organizational commitment among newcomers

Building on the broaden‐and‐build theory and research on the negativity bias, this study examines how trait affectivity, as a stable predisposition predicting the pattern of emotional responding, shapes newcomers' perceptions of supervisor support and experience of organizational commitment. Using latent growth modeling and data collected at four points in time from newcomers (N = 158), we found the initial level of perceived supervisor support to mediate a negative relationship between negative affectivity and the level of commitment. Moreover, although newcomers experienced a general decrease in perceived supervisor support and a related decrease in commitment, those with high positive affectivity experienced a weaker decrease in perceived supervisor support, which led to a weaker decrease in commitment. Incidentally, positive affectivity was also positively related to the initial level of commitment. Two post hoc studies indicated that positive and negative affectivity exerted their effects controlling for state affect and replicated the relationship between change in perceived support and commitment. We discuss how these findings inform our understanding of trait affectivity's influence on newcomers' work attitudes.     

Tensile,Flexural and Chemical Resistance Properties of Sisal Fibre Reinforced Polymer Composites: Effect of Fibre Surface Treatment

In this study, effect of fibre surface treatment on tensile, flexural and chemical resistance properties were studied for sisal fibre reinforced composites. Natural ligno cellulosic sisal fibre reinforced composites were prepared by different surface treatments by hand lay-up method. Fibre surface treatments were carried out to produce good interface between the fibre and the matrix to improve the mechanical properties. Fibre surface treatments were done by boiled the sisal fibres in different % of NaOH and treated the fibres in different % of NaOH, treated in acetic acid and methanol. Unsaturated polyester resin was used as the matrix for preparing the composites. For comparison, these properties for untreated sisal fibre reinforced composites were also studied. From the results it was observed that 18% aqueous NaOH boiled sisal fibre reinforced composites have higher tensile, flexural properties than other composites. Untreated sisal fibre composites show lower properties than treated composites. Chemical resistance properties indicate that all sisal fibre reinforced composites are resistance to all chemicals except carbon tetra chloride. The tests are carried out as per the ASTM standards.