Sea-water seasonal changes at a heavy tourism investment site on the Jordanian northern coast of the Gulf of Aqaba, Red Sea

The Gulf of Aqaba exhibits a strong seasonality due to convective mixing during winter and stratification during summer. The present study provides a detailed appraisal of summer and winter sea-water characteristics at the northern coast of the Gulf of Aqaba, that is witnessing rapid development and increasing changes in its geomorphological characteristics. Sea-water temperature, salinity, nutrients, and chlorophyll a concentrations were measured biweekly at five coastal and four cross-sectional stations during the periods February to April and July to September 2004. Meteorological conditions were continuously recorded at the Marine Science Station. The coastal study sites included four open coastal stations and a marina with one-way exchange with the open water. The effect of convective mixing was clearly apparent on the sea-water characteristics. Natural seasonal characteristics of higher nutrients and chlorophyll a concentrations were recorded during winter at most of the open coastal stations. In the cross-sectional stations, the concentrations of nutrients and chlorophyll a were not different between the surface and the bottom during winter, but the bottom waters had generally higher concentrations during summer. Some deviations from the natural seasonal cycle were recorded at the marina and other coastal stations. Here, higher nutrient and chlorophyll a concentrations were recorded in summer than in winter. These deviations that are most likely due to anthropogenic effects are discussed.     

Predictive modelling of dispersion controlled reactive plumes at the laboratory-scale

A model-based interpretation of laboratory-scale experimental data is presented. Hydrolysis experiments carried out using thin glass tanks filled with glass beads to construct a hypothetical and inert, homogeneous porous medium were analysed using a 2D numerical model. A new empirical formula, based upon results for non-reactive (tracer) experiments is used to calculate transversal dispersivity values for a range of grain sizes and any flow velocities. Combined with effective diffusion coefficients calculated from Stokes-Einstein type equations, plume lengths arising from mixing between two solutes can be predicted accurately using numerical modelling techniques. Moreover, pH and ion concentration profiles lateral to the direction of flow of the mixing species can be determined at any given point downstream, without the need for result fitting. In our case, this approach does not lead to overpredictions of lateral mixing, as previously reported when using parameters derived from non-reactive tracer experiments to describe reactive solute transport. The theory is based on the assumption of medium homogeneity.     

应用混合-澄清槽萃取炼油厂碱渣中和酸性水工艺研究

实验确定了采用有机胺萃处理碱渣中和酸性水时，达到传质平衡时的萃取、反萃混合槽单位体积能耗，以及无相夹带时萃取、反萃澄清槽停留时间。原水CODcr11993～28000mg／L，CODcr去除率85％～90％。     

Stratified flow interactions with a suspended canopy

Field observations of the interactions between a stratified flow and a canopy suspended from the free surface above a solid boundary are described and analysed. Data were recorded in and around the canopy formed by a large long-line mussel farm. The canopy causes a partial blockage of the water flow, reducing velocities in the upper water column. Deceleration of the approaching flow results in a deepening of isopycnals upstream of the canopy. Energy considerations show that the potential for an approaching stratified flow to be diverted beneath a porous canopy is indicated by a densimetric Froude number. Strong stratification or low-velocities inhibit vertical diversion beneath the canopy, instead favouring a horizontal diversion around the sides. The effect on vertical mixing is also considered with a shear layer generated beneath the canopy and turbulence generated from drag within the canopy. In the observations, stratification is shown to be of sufficient strength to limit the effectiveness of the first mixing process, while the turbulence within the canopy is likely to enhance vertical exchange. Velocity and temperature microstructure measurements are used to investigate the effect of the canopy on turbulent dissipation and show that dissipation is enhanced within the canopy.     

Contribution of anadromous fish to the diet of European catfish in a large river system

Many anadromous fish species, when migrating from the sea to spawn in fresh waters, can potentially be a valuable prey for larger predatory fish, thereby efficiently linking these two ecosystems. Here, we assess the contribution of anadromous fish to the diet of European catfish (Silurus glanis) in a large river system (Garonne, southwestern France) using stable isotope analysis and allis shad (Alosa alosa) as an example of anadromous fish. Allis shad caught in the Garonne had a very distinct marine δ¹³C value, over 8‰ higher after lipid extraction compared to the mean δ¹³C value of all other potential freshwater prey fish. The δ¹³C values of European catfish varied considerably between these two extremes and some individuals were clearly specializing on freshwater prey, whereas others specialized on anadromous fish. The mean contribution of anadromous fish to the entire European catfish population was estimated to be between 53% and 65%, depending on the fractionation factor used for δ¹³C.     

The effects of littoral zone vegetation on turbulent mixing in lakes

Micro-scale thermal profile data were acquired in four lakes in northwest England and southeast Australia that ranged from a small, sheltered pond with a surface area of about 1 ha to more open lakes with surface areas of several square kilometres. These lakes provided a range of topographic and climatic contexts, basin morphologies and dominant macrophyte species. The data were acquired using two SCAMP profilers, one deployed in the open water and the other mounted on a field traverse deployed within the vegetated littoral zone. From these profile data, turbulence parameters were calculated. The results show the variation in the influence of vegetation on turbulence in the four lakes, which depends on the combination of wind stress, solar radiative forcing and macrophyte mechanical properties. In the sheltered pond, the vegetation alters the light climate within the water, thus reducing stratification and allowing weak, thermally-driven mixing. In the larger lakes, however, the primary action of the vegetation is to prevent surface-generated TKE from penetrating the water column, although this effect becomes less important as the plant separation increases. A simple mechanistic model, calibrated against the field data, suggests that the macrophyte mechanical properties are most important in determining the turbulent kinetic energy (TKE) profile. Increasing the number of turbulence-generating plants reduces the transport of surface-generated TKE into the deeper water, consistent with the field observations. The model suggests that solar forcing, as measured by the temperature gradient between the surface and bottom waters, is of less importance since the TKE profile is similar in runs with different gradients. Perhaps most surprisingly, the value of the surface-wind stress used in the model is not important, within the limitations of the model, as it does not change the TKE profile, except in a thin surface layer.     

张家口市沙尘天气过程气溶胶单颗粒特征研究

利用单颗粒气溶胶质谱仪对张家口市2015年春季的一次典型沙尘过程进行了监测,分析了沙尘过程对当地大气颗粒物成分的影响。结果表明,监测期间的颗粒物类型主要分为8种:矿物质(MD)、左旋葡聚糖(LEV)、元素碳(EC)、有机碳(OC)、混合碳(ECOC)、重金属(HM)、富钾(K)、其他(Other)。对比沙尘天气来临前、中、后3个时段,随着沙尘天气的来临,本地大气颗粒物成分发生较大变化,矿物质、左旋葡聚糖等成分含量升高,而有机碳、重金属等成分含量下降,其中矿物质在PM10峰值时段小时比例高达27.8%;沙尘天气期间,由于矿物质颗粒占比增加,使得总颗粒物的粒径分布向0.9μm以上的粗粒径段偏移;此外,沙尘天气期间的颗粒物各成分与二次组分的混合程度相较非沙尘天气时段的低,说明其老化程度相对较低。     

State of the Art Report on Multivariate Chemometric Methods in Environmental Forensics☆

Environmental forensic analysis has evolved significantly from the early days of qualitative chemical fingerprint evaluations. The need for quantitative rigor has made the use of numerical methods critical in identifying and mapping contaminant sources in complex environmental systems. Given multiple contaminant sources, the environmental scientist is faced with the challenge of unraveling the contributions of multiple plumes with overlapping spatial and temporal distributions. The problem may be addressed through a multivariate statistical approach, but there is a mind-boggling array of the available "chemometric" methods. This paper provides an overview of these methods, along with a review of their advantages, disadvantages, and pitfalls. Methods discussed include principal component analysis and several receptor-modeling techniques.     

The effects of different mixing intensities during anaerobic digestion of the organic fraction of municipal solid waste

Mixing inside an anaerobic digester is often continuous and is not actively controlled. The selected mixing regime can however affect both gas production and the energy efficiency of the biogas plant. This study aims to evaluate these effects and compare three different mixing regimes, 150 RPM and 25 RPM continuous mixing and minimally intermittent mixing for both digestion of fresh substrate and post-digestion of the organic fraction of municipal solid waste. The results show that a lower mixing intensity leads to a higher biogas production rate and higher total biogas production in both cases. 25 RPM continuous mixing and minimally intermittent mixing resulted in similar biogas production after process stabilization, while 150 RPM continuous mixing resulted in lower production throughout the experiment. The lower gas production at 150 RPM could not be explained by the inhibition of volatile fatty acids. Cumulative biogas production until day 31 was 295 ± 2.9, 317 ± 1.9 and 304 ± 2.8 N ml/g VS added during digestion of fresh feed and 113 ± 1.3, 134 ± 1.1 and 130 ± 2.3 N ml/g VS added during post digestion for the 150 RPM, 25 RPM and minimally mixed intensities respectively. As well as increasing gas production, optimal mixing can improve the energy efficiency of the anaerobic digestion process.     

絮凝用聚合物最佳性能的探讨

本文通过对聚合物混凝剂活化的过程进行剖析，提出了水力条件是唯一影响因素，并比较了三类混合器的性能．