PVC/PES相容性及对共混超滤膜性能的影响

研究了聚氯乙烯(PVC)与聚醚砜(PES)共混体系相容性及其对共混膜性能的影响。利用溶解度参数原则和混合热焓原则进行理论预测,用铸膜液粘度法进行实验表征,均说明该体系为部分相容体系,且其相容性与组成及共混温度有关。通过对共混膜传质特性的考察,表明铸膜液的相容性会明显影响共混膜的性能;采用共混法可以改善膜性能。     

泡沫聚合物保温材料的研究进展及其应用

综述了以聚氨酯泡沫、聚乙烯泡沫和酚醛泡沫塑料为代表的轻质聚合物泡沫保温材料的发展状况。     

Speciation characterization and coagulation of poly-silica-ferric-chloride：The role of hydrolyzed Fe（Ⅲ） and silica interaction

The highly e cient inorganic polymer flocculants (IPFs) of the ferric-silica system is a new and promising coagulant. Interactions between ferric species and silica play a large part in the coagulation of suspensions. These e ects are quite distinct from those associated with polymeric or colloid silica. However, although these species are key to coagulation e ciency, they have not been comprehensively discussed. A new type of coagulant, poly-silica-ferric-chloride (PFSC), was synthesized by co-polymerization and characterized by time complexation spectroscopy and photon correlation spectroscopy. Compared with traditional ferric salt, the results indicated that PFSC had a higher molecular weight, lesser positive charge, lower Feb and higher Fec. The higher the Si/Fe ratio, the higher the silica and lower the silicac found. The PFSC with appropriate polysilica acid not only obtained better coagulation/flocculation e ciency in turbidity removal, enhanced the flocculation index (FI) and provided less residual ferric, it also lowered water treatment costs compared to traditional ferric salt. Results showed that PFSC could remove colloid particles in water by charge neutralization and sweeping, adsorption bridging mechanism.     

Effect of environmental parameters on the degradability of polymer films in laboratory-scale composting reactors

Previous research in our laboratory reported a convenient laboratory-scale composting test method to study the weight loss of polymer films in aerobic thermophilic (53°C) reactors maintained at a 60% moisture content. The laboratory-scale compost reactors contained the following synthetic compost mixture (percentage on dry-weight basis): tree leaves (45.0), shredded paper (16.5), food (6.7), meat (5.8), cow manure (17.5), sawdust (1.9), aluminum and steel shavings (2.4), glass beads (1.3), urea (1.9), and a compost seed (1.0) which is designated Mix-1 in this work. To simplify the laboratory-scale compost weight loss test method and better understand how compost mixture compositions and environmental parameters affect the rate of plastic degradation, a systematic variation of the synthetic mixture composition as well as the moisture content was carried out. Cellulose acetate (CA) with a degree of substitution (DS) value of 1.7 and cellophane films were chosen as test polymer substrates for this work. The extent of CA DS-1.7 and cellophane weight loss as a function of the exposure time remained unchanged when the metal and glass components of the mixture were excluded in Mix-2. Further study showed that large variations in the mixture composition such as the replacement of tree leaves, food, meat, and sawdust with steam-exploded wood and alfalfa (forming Mix-C) could be made with little or no change in the time dependence of CA DS-1.7 film weight loss. In contrast, substituting tree leaves, food, meat, cow manure, and sawdust with steam-exploded wood in combination with either Rabbit Choice (Mix-D) or starch and urea (Mix-E) resulted in a significant time increase (from 7 to 12 days) for the complete disappearance of CA DS-1.7 films. Interestingly, in this work no direct correlation was observed between the C/N ratio (which ranged from 13.9 to 61.4) and the CA DS-1.7 film weight loss. Decreasing moisture contents of the compost Mix-2 from 60 and 50 and 40% resulted in dramatic changes in polymer degradation such that CA DS-1.7 showed an increase in the time period for a complete disappearance of polymer films from 6 to 16 and 30 days, respectively.Guest Editor: Dr. Graham Swift, Rohm & Haas.Paper presented at the Bio/Environmentally Degradable Polymer Society—Second National Meeting, August 19–21, 1993, Chicago, Illinois.     

分子印迹技术在环境科学领域中的应用

分子印迹技术（MIT）是一门新兴的边缘科学技术，它的产生与发展为环境科学打开了又一视角。介绍了MIT的产生与发展及基本原理，综述了MIT在环境科学领域中的应用，主要包括MIT在固相萃取、膜分离、色谱分析、传感器及分子印迹聚合物作为催化剂在环境修复中的应用。     

聚合硅酸硫酸铝铁的制备与应用

在n(Fe A1)／n(Si)为0．5～1．0、n(Al)／n(Fe)为2．5～3．0、SiO2质量分数为2．3％、硅酸钠溶液的活化pH为5．5、硅酸钠溶液的活化时间为12min或SiO2的质量分数为2．0％、硅酸钠溶液的活化pH为6．0、硅酸钠溶液的活化时间为3min的条件下，制备出的聚合硅酸硫酸铝铁对废水的除浊效果最佳，除浊率大于98％。     

A user evaluation of biodegradable cutlery

This paper summarizes a study evaluating the acceptance and perceived performance of disposable cutlery made from starch-based biodegradable resins relative to nondegradable polystyrene cutlery. Two hundred forty-three sailors onboard three U.S. Navy vessels ate their lunch using either biodegradable cutlery made with resins manufactured by one of two commercial companies or polystyrene cutlery. The cutlery was rated on several sensory and performance dimensions as well as for overall acceptability. Results indicated that sailors rated both the biodegradable and the polystyrene utensils as easy to hold. There were also no differences in the perceived ease of using each of the spoons. However, compared to the polystyrene utensils, both types of biodegradable utensils were viewed as less sturdy, as having a less attractive color, and as being less acceptable overall. The biodegradable forks and knives were also rated as more difficult to use for piercing and cutting food than the polystyrene ones. In addition, several significant differences emerged between the two types of biodegradable cutlery. The results are discussed in terms of the need for continued consumer testing of products developed from biodegradable polymeric materials.     

Synthesis and biodegradation of poly(γ-butyrolactone-co-l-lactide)

Biodegradable polyesters were synthesized by ring-opening copolymerization of -butyrolactone (BL) and its derivatives withl-lactide (LLA). Although tetraphenyl tin was the main catalyst used, other organometallic catalysts were used as well.¹H and¹³C NMR spectra showed that poly(BL-co-LLA)s were statistical and that their number-average molecular weights were as high as 7×10⁴. The maximum BL content obtained from copolymerization BL/LLA was around 17%. TheT _m andT _g values of the copolymers showed a gradual depression with an increase in BL content. NoT _m was obtained for the copolymers containing more than 13 mol% BL. The biodegradability of the copolyesters was evaluated by enzymatic hydrolysis and nonenzymatic hydrolysis tests. The enzymatic hydrolysis was carried out at 37°C for 24 h using lipases fromRhizopus arrhizus andR. delemar. Hydrolyses by both lipases showed that an increase in BL content of the copolymer resulted in enhanced biodegradability. Nonenzymatic accelerated hydrolysis of copolymers at 70°C was found to increase proportionally to their exposure time. The hydrolysis rate of these copolymers was considerably faster than that of PLLA. The higher hydrolyzability was recorded for the BL-rich copolymers. The copolymerization of -methyl--butyrolactone (MBL) or -ethyl--butyrolactone (EBL) with LLA resulted in relatively LA-rich copolymers.     

聚合氯化铝与有机高分子复合絮凝剂的形态分布研究——AlFerron和~(27)AlNMR相结合

主要研究了Ａｌ－Ｆｅｒｒｏｎ逐时络合比色法和＾２７Ａｌ－ＮＭＲ法应用于聚合铝与有机高分子复合絮凝剂形态分布的测定，结果表明，两种方法分别测定的Ａｌｂ和Ａｌ１３的结果具有一定的相关性；聚合铝与有机高分子复合后其形态分布发生了一定的变化，Ａｌｂ（或Ａｌ１３）的含量有所降低，但仍是优势形态，Ａｌａ（或Ａｌ单）的含量基本保持不变。     

阳离子型聚合物对低温低浊水的絮凝效果与形态学特性

采用微絮凝-深床直接过滤工艺,以西安市曲江水厂低温低浊水质为原水(水温低于10 ℃,初始浊度低于10NTU),投加阳离子型聚合物(简称CP)作主混凝剂或助凝剂,借助分形数学理论与图像分析技术,对滤料粒径、原水浊度、原水温度、药剂种类、聚合物分子量及投加量、混合强度等因素对处理效果的影响进行了研究,分析探讨了不同药剂处理低温低浊水的作用机理、絮凝形态学特征以及絮体结构的分形特性.结果表明,①当温度低于4 ℃、初始浊度小于4NTU时,不宜单独采用Al2(SO4)3或PAC作为絮凝剂;当温度为4～10 ℃、初始浊度小于10NTU时,如果只投加Al2(SO4)3或PAC作为絮凝剂,宜用细砂滤料过滤;低温低浊条件下,无机混凝剂形成的絮体粒径小、结构松散脆弱、有效质量密度低、沉速慢,但表征絮体分形特性的分维值较高.②CP作絮凝剂能显著改善低温低浊水的絮凝效果与过滤性能,但混合强度需增大,宜用粗砂滤料过滤;③单独用CP作絮凝剂时,宜投加分子量较低的弱阳性聚合物或投加低剂量较高分子量的强阳性聚合物;CP用作助凝剂时,能显著减少主混凝剂用量,但宜投加强阳性聚合物或增加弱阳性聚合物的剂量.④CP兼备电性中和与吸附架桥絮凝作用,能形成粒径较大、吸附性能与过滤性能良好的网状絮体构型,其有效质量密度高,产生的污泥量少,污泥沉降速度快,脱水效果好,但分维值低.⑤各种水处理药剂的处理效果为:Al2(SO4)3(或PAC) CP＞CP＞PAC＞Al2(SO4)3,这种差别由絮体的形态学特性与构型特征各异引起.