Sizing and performance analysis of standalone hybrid photovoltaic/battery/hydrogen storage technology power generation systems based on the energy hub concept

In this study, the optimal sizing and performance analysis of a standalone integrated solar power system equipped with different storage scenarios to supply the power demand of a household is presented. One of the main purposes when applying solar energy resource is to face the increasing environmental pollutions resulting from fossil fuel based electricity sector. To this end, and to compare and examine two energy storage technologies (battery and hydrogen storage technology), three storage scenarios including battery only, hydrogen storage technology only and hybrid storage options are evaluated. An optimization framework based on Energy Hub concept is used to determine the optimum sizes of equipment for the lowest net present cost (NPC) while maintaining the system reliability. It was determined that the most cost effective and reliable case is the system with hybrid storage technology. Also, the effects of solar radiation intensity, the abatement potential of CO₂ emissions and converting excess power to hydrogen on the system’s performance and economics, were investigated and a few noticeable findings were obtained.     

Lemon Balm (Melissa officinalis) Stalk: Chemical Composition and Fiber Morphology

This work investigates the potentials of lemon balm (Melissa officinalis L.) stalk (LBS), a massive waste part of medicinal plant, for pulp and papermaking by assessing its fiber characteristics and chemical composition. In addition, LBS properties were compared with some important agro-residues such as bagasse stalk (BS), cotton stalk (CS) and tobacco stalk (TS). There is no information about suitability of the LBS in the open literature. Chemically, LBS fibers contain a relatively high percentage of alpha-cellulose (32.7%), but a low percentage of lignin (25%), which benefits pulping and bleaching. The hemicelluloses in LBS are mainly glucose and xylose. Ash content was about 6%, superior to the average value corresponding to woods, which makes pulping difficult. It was verified that the chemical compositions of the studied agro-residues vary significantly. Morphologically, the LBS fibers are comparable to those of hardwoods. Rather a significant amount of parenchyma cells was found in LBS. The TS has the highest average fiber length, while the LBS has the least, and the lengths of BS and CS fibers fall in between. In general, based on the results of this study, some propositions can be made about the possible applications of LBS as a non-wood renewable source of natural products for use in the production of pulp and paper.     

Optimization of Xanthan Gum/Poly(acrylic acid)/Cloisite 15A Semi-IPN Hydrogels for Heavy Metals Removal

Journal of Polymers and the Environment - Semi-interpenetrating networks (semi-IPNs) of Xanthan gum/poly (acrylic acid) containing Cloisite 15A were prepared via radical polymerization using a...     

The long-term effect of exposure to respirable particulate matter on the incidence of myocardial infarction: a systematic review and meta-analysis study

Environmental Science and Pollution Research - Although several studies have investigated the long-term association of respirable particulate matter (PM?≤?10 µm)...     

Synthesis of magnetic nanoparticles and their effects on growth and physiological parameters of Calotropis procera seedlings

Environmental Science and Pollution Research - The present study was carried out to elucidate effects of synthesized magnetic nanoparticles (MNPs) on morphological and physiological parameters and...     

A Novel Approach to Biological Treatment of Contaminated Water

Over the past few years, the focus of our research has been to respond to the recognized needs for novel biological processes that are capable of destroying a wide range of biodegradable pollutants and providing the perfect environment for complex interspecies interactions required for the degradation of environmental contaminants. A new biotechnology process called Biological Permeable Barrier (BPB) was developed to provide high microbial density, stable environmental conditions, and protective measures for microbial activities for in‐situ bioremediation of contaminated groundwater. This patented technology (U.S. Patent 6,337,019 ) is based on the creation of a structured matrix, or Bio‐beads, that provides the perfect environment for organic‐degrading microorganisms to establish biofilms capable of destroying the contaminants in water with remarkable stability and control. For over 240 days, the viability and performance of the BPB (Bio‐beads) system were shown for biodegradation of a targeted contaminant, 2,4,6‐ trichlorophenol (TCP), under a variety of operating and stress conditions (Razavi‐Shirazi, 1997 ). Extensive batch experiments were also conducted to obtain necessary data to determine the rate of TCP diffusion into the Bio‐beads, adsorption properties of the Bio‐beads, and substrate‐use rate of the mixed bioculture as free cells and as immobilized cells (Bio‐beads). A simulated model of BPB was also characterized with its porosity, permeability, and compressibility or deformation under typical field conditions. Our extensive research showed that BPB takes advantage of a controlled biotechnology process to overcome the disadvantages and uncertainties associated with conventional biological processes. A summary of our investigation is presented here. © 2002 Wiley Periodicals, Inc.     

Managing uncertainties through scenario analysis in strategic environmental assessment

Planning for the future is uncertain, and scenario analysis is a method of coping with the uncertainties of future plans. This paper addresses how to deal with future uncertainties by using scenario analysis as a possible approach for conducting a strategic environmental assessment (SEA). Although scenario-based approaches have been linked to strategic planning and SEA, this paper for the first time proposes how a combined approach may be implemented using specific tools and methodologies and, further on, it also implements the first three stages of the six stages proposed for the ‘scenario-based strategic planning’ approach. This work is an attempt to standardize SEA and scenario analysis as a combined approach. The three stages are tested within the Tourism Development Plan of the Iranian province of Gilan, which has been selected as a case study.     

Spatial analysis of chromium in southwestern part of Iran: probabilistic health risk and multivariate global sensitivity analysis

This study was concerned with chromium as a potential carcinogenic contaminant in 64 wells located in five aquifers, southwest of Iran. A probabilistic health risk assessment indicated a high risk to the local residents including adults and children in the study area. A sequential sensitivity analysis and a novel approach known as multivariate global sensitivity analysis using both principal component analysis and B-spline were applied to investigate the behavior of health risk model along time considering four independent input parameters in the risk equation. In this context, based on the results of sensitivity analysis, concentration of chromium in drinking water (C_w) and body weight (W) were the most influential parameters. Random forest (RF) was used as a variable selection method to choose the most influential parameters for the prediction of chromium. Five parameters, among 13 water quality variables, including phosphate, nitrate, fluoride, manganese and iron were selected by RF as the most important parameters for spatial prediction. Hybrid methods of RF and ordinary kriging (RFOK) and RF and inverse distance weighting (RFIDW) were then applied for spatial prediction of Cr using the secondary variables. The RFOK and RFIDW were more efficient than that of ordinary kriging (OK) with respect to a cross-validation algorithm. For instance, in terms of relative root mean squared error, the performance of OK was improved from 31.72 to 23.21 and 23.61 for RFOK and RFIDW, respectively.

     

Plants growing in a mining area: screening for metal accumulator plants possibly useful for bioremediation

A field study was conducted in an iron mine in Hamedan (Iran) to find native accumulator plants and to evaluate the extent of metal bioaccumulation in the naturally growing vegetation. The concentrations of total As, Cd, Cr, Fe, Mn, Mo, Ni, Pb, Si, and Zn were found to be higher in the mine than in soil. These plants accumulated the highest amounts of the following metals in their roots: Euphorbia cheiradenia As, Stipa barbata Cd, Pb and Cr, Euphorbia macroclada Cu, Centaurea iberica Fe, Reseda lutea Mo, Salvia spinosa Ni and Zn, and Xanthium strumarium Se. In the aerial parts, the highest metal accumulation was found in Epilobium fragilis As, Carthamus oxyacantha Cd, Fe, Mn, and Pb, Verbascum speciosum Cu, Centaurea iberica Mo, Salvia spinosa Ni and Cr, Glaucium grandiflorum Se, and Malva neglecta Zn. Enrichment factors and bioconcentration factors were also determined; C. oxyacantha, S. spinosa, M. neglecta, C. iberica, V. speciosum, G. grandiflorum, and E. fragilis are the most effective accumulators and are proposed for phytoremediation of polluted soils.