Climate change and air pollution jointly creating nightmare for tourism industry

The objective of the study is to examine the long-run and causal relationship between climate change (i.e., greenhouse gas emissions, hydrofluorocarbons, per fluorocarbons, and sulfur hexafluoride), air pollution (i.e., methane emissions, nitrous oxide emissions, and carbon dioxide emissions), and tourism development indicators (i.e., international tourism receipts, international tourism expenditures, natural resource depletion, and net forest depletion) in the World’s largest regions. The aggregate data is used for robust analysis in the South Asia, the Middle East and North Africa, sub-Saharan Africa, and East Asia and the Pacific regions, over a period of 1975–2012. The results show that climatic factors and air pollution have a negative impact on tourism indicators in the form of deforestation and natural resource depletion. The impact is evident, as we have seen the systematic eroding of tourism industry, due to severe changes in climate and increasing strain of air pollution. There are several channels of cause–effect relationship between the climatic factors, air pollution, and tourism indicators in the World’s region. The study confirms the unidirectional, bidirectional, and causality independent relationship between climatic factors, air pollution, and tourism indicators in the World. It is conclusive that tourism industry is facing all time bigger challenges of reduce investment, less resources, and minor importance from the government agencies because of the two broad challenges, i.e., climate change and air pollution, putting them in a dismal state.     

Positive environmental effects of the coronavirus 2020 episode: a review

Environment, Development and Sustainability - The outbreak of COVID-19 has made a global catastrophic situation that caused 1,039,406 deaths out of 35,347,404 infections, and it will also cause...     

Design and Characterization of PVA–Methacrylic Acid Based Smart Polymeric System for Controlled Release of Metoprolol

In the present work covalently crosslinked smart polymeric system of hydrogel based on poly vinyl alcohol (PVA) and methacrylic acid (MA) was designed by free radical polymerization with different compositions using glyoxal (40 % water solution) as crosslinker. It was observed that swelling of hydrogel had a pronounced enhancing effect on increasing the concentration of MA due to availability of more ionized carboxylic groups of MA but produced an opposite effect on increasing the concentration of glyoxal owing to less porous structure. As far as PVA is concerned, swelling did not show significant effect on increasing the concentration of PVA. Hydrophilic polymer PVA rich in hydroxyl group pertained to be highly interactive with water. It was examined that the release of metoprolol tartrate decreased with increased concentration of glyoxal, but increased with increase in concentration of MA. PVA/MA hydrogel was characterized by Fourier transform infrared spectroscopy and X-ray diffraction to study the structure and crystallinity of hydrogel respectively. Morphology was studied through scanning electron microscopy. Furthermore differential scanning calorimetry and thermogravimetric analysis were also performed to characterize thermal stability. It may be concluded that the mechanism of drug release was mainly non-Fickian diffusion.     

Carbaryl stress induced cellular changes in Calothrix brevissima

Cyanobacterial biofertilizers are affected by paddy field pesticides as nontarget organism. Carbaryl is a carbamate pesticide and is commonly used against rice thrip pest in paddy fields. In the present work, cellular changes caused by exposure of the cyanobacterial biofertilizer namely Calothrix brevissima to carbaryl were studied with special reference to fatty acids, electrolyte leakage, sulfur metabolism, and osmolytes. To study the toxic effect of carbaryl, the test cyanobacterium was exposed to varying concentrations of pesticide (0, 10, 20, 30, and 40 mg L^?1) for biochemical analyses. At 40 mg L^?1 carbaryl, polyunsaturated fatty acids were reduced by 32 % and membrane leakage was increased by 27 % suggesting that free radical-mediated lipid peroxidation took place. The sulfur-containing metabolites namely cysteine, cystine, and methionine were increased by 79, 64, and 52 %, respectively. The enzymatic and nonenzymatic antioxidants namely glutathione S-transferase, glutathione reductase, reduced glutathione, and oxidized glutathione were increased to 56, 71, 72, and 60 %, respectively. Osmolytes that serve as stress enzyme protectors as well as nonenzymatic free radical scavenger were also increased, indicating their protective nature in context with carbaryl-induced stress. The respective increase in mannitol, trehalose, and glycogen were 158, 98, and 159 %. In C. brevissima, carbaryl-induced membrane leakage was counteracted by increasing enzymatic and nonenzymatic parameters that helped in scavenging free radicals.     

Does energy consumption contribute to environmental pollutants? evidence from SAARC countries

The objective of the study is to examine the causal relationship between energy consumption and environmental pollutants in selected South Asian Association for Regional Cooperation (SAARC) countries, namely, Bangladesh, India, Nepal, Pakistan, and Srilanka, over the period of 1975–2011. The results indicate that energy consumption acts as an important driver to increase environmental pollutants in SAARC countries. Granger causality runs from energy consumption to environmental pollutants, but not vice versa, except carbon dioxide (CO₂) emissions in Nepal where there exists a bidirectional causality between CO₂ and energy consumption. Methane emissions in Bangladesh, Pakistan, and Srilanka and extreme temperature in India and Srilanka do not Granger cause energy consumption via both routes, which holds neutrality hypothesis. Variance decomposition analysis shows that among all the environmental indicators, CO₂ in Bangladesh and Nepal exerts the largest contribution to changes in electric power consumption. Average precipitation in India, methane emissions in Pakistan, and extreme temperature in Srilanka exert the largest contribution.     

Internalisation of externalities: Who bears the cost of pollution control?

Summary The impact of environmental regulations on the welfare of Malaysian palm oil growers, producers, and refiners are evaluated in an open-economy model. The estimated incremental effects of effluent standards and changes have been specifically rather small, with the exception of those upon the growers, but the cumulative effects have been considerable.Dr Khalid Abdul Rahim is a member of staff in the Department of Natural Resource Economics at the Universiti Pertanian Malaysia. This article is based on part of the work undertaken for his PhD dissertation at the University of Illinois, USA.     

Physical Characterization and Pre-assessment of Recycled High-Density Polyethylene as 3D Printing Material

3D printing has received lots of attention due to its limitless potential and advantages in comparison to traditional manufacturing processes. This study focuses on the most popular type of home 3D printers, namely fused filament fabrication (FFF) printers, which use plastic filaments as the feedstock. The rather high material cost and large amount of plastic waste generated by FFF 3D printers have driven the need for plastic filaments produced from recycled plastic waste. This study evaluates, in terms of physical characterization, the feasibility of using recycled high-density polyethylene (HDPE), one of the most commonly used plastics, as the feedstock for 3D printers, in comparison with the common acrylonitrile butadiene styrene plastic pellets. In-house extrusion using recycled HDPE pellets and flakes is possible. The diameter consistency and extrusion rate results, along with other physical characterization results, including differential scanning calorimetry, thermogravimetric analysis, Fourier transform infrared spectroscopy, Raman spectroscopy, and water absorption, suggest that making filaments from recycled HDPE pellets is a viable option, as the obtained filament has favorable water rejection and comparable extrusion rate and thermal stability. Existing methods for overcoming the warping and adhesion problems in 3D printing with HDPE were also reviewed. In order to increase the market competitiveness of waste-derived filaments, optimization of the extrusion process, studies on the mechanical and aging properties, and development of a standard characterization methodology and database are crucial.     

A critical review of state-of-the-art electrocoagulation technique applied to COD-rich industrial wastewaters

Environmental Science and Pollution Research - Electrocoagulation (EC) is one of the emerging technologies in groundwater and wastewater treatment as it combines the benefits of coagulation,...     

Does geopolitical risk escalate CO2 emissions? Evidence from the BRICS countries

Environmental Science and Pollution Research - High levels of CO2 emissions are extensively cited as one of the main global concerns nowadays. Therefore, researchers have been investigating the...