北京市沙尘天气中矿物单颗粒的物理化学特征

应用场发射扫描电子显微镜和X射线能谱仪,研究了2005年4月北京市区2次典型沙尘天气PM₁₀样品中矿物单颗粒的形貌、数量-粒度分布和化学组成.研究表明:沙尘天气样品中的矿物颗粒呈边缘锋利的不规则状;数量-粒度分布在1.0～1.5　μm出现明显的峰值.根据X射线能谱的定量数据,将721个矿物单颗粒分为7类.沙尘天气样品中的矿物颗粒主要以硅铝酸盐和石英矿物为主,并且有富Ca颗粒出现.大部分颗粒是2种或更多种矿物的内部混合物.沙尘天气富Ca颗粒占矿物单颗粒总数的5.9%,主要以CaCO₃以及硅铝酸盐或石英的混合物的形式存在;非沙尘天气样品中富Ca颗粒含量高达14.5%,其中约有一半来自人为源排放.单个矿物颗粒中Ca含量以及m(Ca)/m(Al)可以用来区分外来沙尘源与本地矿物颗粒.      

Seventy‐One Important Questions for the Conservation of Marine Biodiversity

The ocean provides food, economic activity, and cultural value for a large proportion of humanity. Our knowledge of marine ecosystems lags behind that of terrestrial ecosystems, limiting effective protection of marine resources. We describe the outcome of 2 workshops in 2011 and 2012 to establish a list of important questions, which, if answered, would substantially improve our ability to conserve and manage the world's marine resources. Participants included individuals from academia, government, and nongovernment organizations with broad experience across disciplines, marine ecosystems, and countries that vary in levels of development. Contributors from the fields of science, conservation, industry, and government submitted questions to our workshops, which we distilled into a list of priority research questions. Through this process, we identified 71 key questions. We grouped these into 8 subject categories, each pertaining to a broad component of marine conservation: fisheries, climate change, other anthropogenic threats, ecosystems, marine citizenship, policy, societal and cultural considerations, and scientific enterprise. Our questions address many issues that are specific to marine conservation, and will serve as a road map to funders and researchers to develop programs that can greatly benefit marine conservation. Setenta y Un Preguntas Importantes para la Conservación de la Biodiversidad Marina     

Thermal hazard analysis of 1-((cyano-1-methylethyl) azo) formamide and effect of incompatible substances on its thermal decomposition

1-((cyano-1-methylethyl) azo) formamide (CABN) is an azo compound that exhibits high thermal sensitivity and self-reactivity. Because of incorrect operation, incompatible substances and other dangerous conditions, thermal explosion accidents may occur during the manufacturing, storage, and transportation of CABN. The pyrolysis characteristics of CABN and its mixture for various heating rates were assessed using differential scanning calorimetry. The results showed that incompatible substances increased the risk of CABN. Moreover, the thermal runaway of CABN under an adiabatic condition was studied using an adiabatic rate calorimeter to obtain the parameters under adiabatic condition. Based on the experimental data, the kinetic parameters of CABN and its mixtures were obtained. In addition, a thermal decomposition kinetic model of CABN was created using Thermal Safety Series. All experiments have shown that the conditions and parameters of CABN must be strictly controlled.     

Mathematical modelling and experimental validation of solar drying of mushrooms

This article presents two mathematical models for drying mushrooms considering the shrinkage effect. Both the models consider the physical changes of mushrooms during drying using the diffusion equation. A convective term is presented in the first model while, in the second model, the effective diffusion co-efficient is employed. Although the diffusion co-efficient is mainly dependent on the water content of the mushrooms, both models are suitable for analyzing the drying process. Moreover, in this study it has been demonstrated that both models are equivalent. The Genetic Algorithmic process was used to estimate the parameter values in different conditions. The information regarding the moisture content and the thickness evaluation taken from the models shows the best fit with the experimental data. The mathematical models developed to simulate the drying curve of mushroom have been evaluated and compared.     

纳米铁锰氧化物对钒的吸附特性研究

为寻求处理土壤和地下水钒污染的吸附剂,采用模拟实验,开展了纳米铁锰氧化物(MnFe_2O_4)对五价钒(V~(5+))的吸附特征研究,分析了纳米铁锰氧化物浓度、pH值、时间、温度和初始钒浓度等因素对MnFe_2O_4吸附V~(5+)的影响,以揭示纳米铁锰氧化物的吸附动力学及热力学等特征,并通过扫描电镜(SEM)和红外光谱(IR)等表征方法分析了纳米铁锰氧化物吸附V~(5+)的机理.结果表明,在初始钒溶液为100 mg·L~(-1),MnFe_2O_4加入量为0.1 g,pH=4,温度为25℃的条件下,吸附过程在24 h达到平衡,且此条件下有最大吸附值和吸附率,分别为15.14 mg·g~(-1)和60.54%.纳米铁锰氧化物吸附钒的动力学过程符合伪二级动力学模型,等温吸附线符合Langmuir模型.热力学研究表明,升高温度有利于吸附,吸附过程为吸热过程.由扫描电镜结果可知,纳米铁锰氧化物有较大的比表面积,可提供较多的活性位点.因此,纳米铁锰氧化物可作为一种吸附材料用于钒污染废水处理.     

牛眼虹膜定位算法研究及其在肉食品追溯系统中的应用

为实现动物个体的精确鉴别,提高肉食品的安全性,将动物虹膜识别技术引入到肉食品供应链中,构建了基于虹膜识别的肉食品安全可追溯系统业务流程,实现了肉食品"从农场到餐桌"的安全保障;并以牛眼虹膜为例,根据其非同心椭圆的结构特征和图像仿射变换不变特征的原理,提出了一种牛眼虹膜快速定位方法。将牛眼虹膜内、外边界分别转化为圆形,对内边界采用灰度均值法粗定位与"三点定圆"精定位相结合的方法实现,对外边界设计了一种逐点扫描分层圆环算法来精确拟合。实验结果表明:该方法避免了虹膜信息丢失,减少了空间参数的选择运算。     

2-氨基-2,3-二甲基丁酰胺氧化合成热危险性研究

为研究2-氨基-23,-二甲基丁酰胺氧化合成的热危险性,采用差示扫描量热仪(DSC)测试2-氨基-2,3-二甲基丁腈和2-氨基-2,3-二甲基丁酰胺的热分解情况,采用反应量热仪(RC1)研究反应温度、双氧水滴加速度和氢氧化钠用量对反应的影响。研究结果显示,2-氨基-2,3-二甲基丁腈吸热热分解温度为149.5℃2,-氨基-2,3-二甲基丁酰胺表现为吸热和放热2段分解过程,吸热和放热分解温度分别为234.4℃和456℃。反应放热速率主要为加料控制,但是,存在一定的热累积。热失控体系最高温度(MTSR)低于2-氨基-23,-二甲基丁腈和2-氨基-23,-二甲基丁酰胺的分解温度,高于体系沸腾温度,在热失控的条件下,反应体系容易导致冲料危险;在优惠的工艺条件范围内,提高反应温度,延长滴加时间,可降低反应的MTSR,提高热转化率和反应安全性。     

Mg(BH_4)_2和MgH_2对RDX热分解特性的影响

在黑索今(RDX)中加入具有高热值的金属氢化物(Mg(BH4)2和MgH2)有望提高RDX的爆炸性能,但同时给RDX的安全使用带来挑战。为了探索RDX与这2种金属氢化物的相容性与安定性,采用差示扫描量热法(DSC)研究Mg(BH4)2和MgH2对RDX热分解性能的影响,并由DSC得到的数据计算动力学参数,参照GJB770B—2005的方法分析这2种金属氢化物与RDX的相容性和安定性。结果表明,加入Mg(BH4)2使RDX的表观活化能从159.22 kJ/mol增加至180.27 kJ/mol,加入MgH2使RDX的表观活化能降低至133.69 kJ/mol;Mg(BH4)2与RDX的相容性为1级,MgH2与RDX的相容性为3级,加入Mg(BH4)2使RDX的安定性有所提高,加入MgH2降低了RDX的安定性。因此,在将MgH2作为RDX的高能添加剂以前,必须首先提高其与RDX的相容性以保证试验和存储过程的安全。     

起重机主梁变形三维激光扫描检测技术研究

在役起重机主梁变形是导致起重机事故发生的重要因素之一。国内现阶段对于起重机主梁变形检測还停留在传统的检测方法。其检测低效率、实施高风险、结果多误差等因素使传统检测方法暴露出诸多弊端。文章通过对比验证,引入三维激光扫描检测方法,对起重机主梁腹板进行扫描并建模分析得出主梁腹板整体变形的结果,此方法可以提高腹板变形检测数据精度、检测效率与结论的可靠性。扫描数据是整个腹板的点云数据,结果更全面,可以体现腹板整体的变形情况。     

枣庄市大气颗粒物扫描电镜分析和来源识别

应用扫描电镜-X射线能谱对枣庄市大气颗粒物进行定性分析,得出如下结论：（1）枣庄市大气颗粒物中含有燃煤颗粒、土壤颗粒、水泥颗粒、汽车尾气颗粒、石膏颗粒、植物残体颗粒和未知颗粒;（2）依据颗粒粒数百分比统计结果。得出枣庄市大气颗粒物以水泥颗粒、土壤颗粒和燃煤颗粒为主,汽车尾气颗粒和其它颗粒含量很少;（3）对枣庄市大气颗粒物平均粒径进行统计,得出枣庄市大气颗粒物平均粒径集中分布在2．5μm～20岬范围内,其粒数百分比在80％以上。